ADG1636BRUZ

{
  "slug": "adg1636bruz",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Pre-ordered Chips, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "adg1636bruz",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "adg1636bruz.kicad_sym",
    "adg1636bruz.kicad_mod",
    "adg1636bruz.glb",
    "adg1636bruz.step",
    "adg1636bruz.lbr",
    "docs/hero.png",
    "docs/adg1636bruz-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "adg1636bruz-hero.glb",
    "adg1636bruz-hero.overlay.json",
    "adg1636bruz-etched.glb"
  ],
  "component": {
    "mpn": "ADG1636BRUZ",
    "manufacturer": "Analog Devices",
    "package": "TSSOP-16",
    "pin_count": 16,
    "category": "Interface ICs",
    "subcategory": "Pre-ordered Chips",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADG1636.pdf",
    "parts": {
      "symbol": "adg1636bruz.kicad_sym",
      "footprint": "adg1636bruz.kicad_mod",
      "model_3d": "adg1636bruz-hero.glb",
      "model_3d_plain": "adg1636bruz-etched.glb",
      "model_3d_step": "adg1636bruz-etched.step",
      "model_3d_step_plain": "adg1636bruz.step",
      "lbr": "adg1636bruz.lbr"
    },
    "distributor_links": {
      "lcsc": "C655247",
      "digikey": "505-ADG1636BRUZ-ND",
      "mouser": "584-ADG1636BRUZ"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T21:03:26Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-ADG1636BRUZ-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-ADG1636BRUZ",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IN1",
        "type": "input",
        "description": "Logic control input for switch 1; the datasheet gives 3 V logic compatibility with VINH min 2.0 V and VINL max 0.8 V."
      },
      {
        "number": "2",
        "name": "S1A",
        "type": "bidirectional",
        "description": "Source terminal of switch 1A, which can be an input or output and is connected to D1 when IN1 is logic 1."
      },
      {
        "number": "3",
        "name": "D1",
        "type": "bidirectional",
        "description": "Drain terminal of switch 1, which can be an input or output."
      },
      {
        "number": "4",
        "name": "S1B",
        "type": "bidirectional",
        "description": "Source terminal of switch 1B, which can be an input or output and is connected to D1 when IN1 is logic 0."
      },
      {
        "number": "5",
        "name": "VSS",
        "type": "power_in",
        "description": "Most negative power supply potential; the datasheet limits VDD to VSS to 18 V maximum."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground (0 V) reference for the device."
      },
      {
        "number": "7",
        "name": "NIC",
        "type": "unconnected",
        "description": "No internal connection; the pin is not connected inside the device."
      },
      {
        "number": "8",
        "name": "NIC",
        "type": "unconnected",
        "description": "No internal connection; the pin is not connected inside the device."
      },
      {
        "number": "9",
        "name": "IN2",
        "type": "input",
        "description": "Logic control input for switch 2; the datasheet gives 3 V logic compatibility with VINH min 2.0 V and VINL max 0.8 V."
      },
      {
        "number": "10",
        "name": "S2A",
        "type": "bidirectional",
        "description": "Source terminal of switch 2A, which can be an input or output and is connected to D2 when IN2 is logic 1."
      },
      {
        "number": "11",
        "name": "D2",
        "type": "bidirectional",
        "description": "Drain terminal of switch 2, which can be an input or output."
      },
      {
        "number": "12",
        "name": "S2B",
        "type": "bidirectional",
        "description": "Source terminal of switch 2B, which can be an input or output and is connected to D2 when IN2 is logic 0."
      },
      {
        "number": "13",
        "name": "VDD",
        "type": "power_in",
        "description": "Most positive power supply potential; the datasheet gives VDD to VSS absolute maximum of 18 V and VDD to GND of -0.3 V to +18 V."
      },
      {
        "number": "14",
        "name": "EN",
        "type": "input",
        "description": "Active high digital enable input; when low, the device is disabled and all switches are off, and when high, the IN logic inputs determine the on switches."
      },
      {
        "number": "15",
        "name": "NIC",
        "type": "unconnected",
        "description": "No internal connection; the pin is not connected inside the device."
      },
      {
        "number": "16",
        "name": "NIC",
        "type": "unconnected",
        "description": "No internal connection; the pin is not connected inside the device."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin numbers and names are taken from Table 7 (TSSOP column). The Figure 3 TSSOP drawing text extract; The datasheet says the source terminals 'can be an input or output'; the KiCad type 'bidirectional' ; The ADG1636BRUZ ordering entry is 16-Lead TSSOP (RU-16), which matches the TSSOP-16 hint, so the TSS"
        ],
        "pages_sent": 16,
        "cost_usd": 0.0857,
        "at": "2026-10-28T21:02:56"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/ADG1636.pdf",
        "pages": 16,
        "sha256": "78e3e239c1242588",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "adg1636bruz.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "adg1636bruz-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e99b9d8080f0007b112131187e2a1baa3ff2728e74edb09adf038b17193509b9",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "RU-16",
      "source_page": 16,
      "D": {
        "nom_mm": 5.0,
        "range_mm": [
          4.9,
          5.1
        ]
      },
      "E1": {
        "nom_mm": 4.4,
        "range_mm": [
          4.3,
          4.5
        ]
      },
      "E": {
        "nom_mm": 6.4,
        "range_mm": [
          null,
          null
        ]
      },
      "e": {
        "nom_mm": 0.65,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.2,
        "range_mm": [
          null,
          1.2
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "adg1636bruz.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}