component
ADC122S021CIMM
Public Made by Adomby adom
Texas Instruments Analog To Digital Converters (ADC), VSSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownADC122S021CIMM
Texas Instruments · Analog To Digital Converters (ADC) · VSSOP-8
ADC122S021CIMM from Texas Instruments, in a VSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS | input | Chip select; a conversion process begins on the falling edge of CS and conversions continue as long as CS is held low. |
| 2 | VA | power_in | Positive supply pin, to be connected to a quiet +2.7V to +5.25V source and bypassed to GND with a 1 µF and a 0.1 µF capacitor located within 1 cm of the pin. |
| 3 | GND | power_in | Ground return for the die. |
| 4 | IN2 | passive | Analog input channel 2; signal can range from 0V to VA. |
| 5 | IN1 | passive | Analog input channel 1; signal can range from 0V to VA. |
| 6 | DIN | input | Digital data input; the Control Register is loaded through this pin on rising edges of SCLK. |
| 7 | DOUT | tri_state | Digital data output; conversion result samples are clocked out of this pin on falling edges of SCLK, and the pin is high-impedance when CS is high. |
| 8 | SCLK | input | Digital clock input that directly controls the conversion and readout processes. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VSSOP-8 |
| Category | Data Acquisition |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
ADC122S021CIMM - Footprint:
Package_SO:VSSOP-8_2.3x2mm_P0.5mm - 3D model: VSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
adc122s021cimm-etched.step/adc122s021cimm-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adc122s021cimm.step/adc122s021cimm.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (29 pp, sha256
32da082b60c2b65c, retrieved 2026-09-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).