ADC084S021CIMM

{
  "slug": "adc084s021cimm",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Analog To Digital Converters (ADCs), VSSOP-10-0.5mm. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "adc-dac-data conversion",
    "adc084s021cimm",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "adc084s021cimm.kicad_sym",
    "adc084s021cimm.kicad_mod",
    "adc084s021cimm.glb",
    "adc084s021cimm.step",
    "adc084s021cimm.lbr",
    "docs/hero.png",
    "docs/adc084s021cimm-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "adc084s021cimm-hero.glb",
    "adc084s021cimm-hero.overlay.json"
  ],
  "component": {
    "mpn": "ADC084S021CIMM",
    "manufacturer": "Texas Instruments",
    "package": "VSSOP-10-0.5mm",
    "pin_count": 10,
    "category": "ADC/DAC/Data Conversion",
    "subcategory": "Analog To Digital Converters (ADCs)",
    "datasheet": "https://www.ti.com/cn/lit/gpn/adc084s021",
    "parts": {
      "symbol": "adc084s021cimm.kicad_sym",
      "footprint": "adc084s021cimm.kicad_mod",
      "model_3d": "adc084s021cimm-hero.glb",
      "model_3d_plain": "adc084s021cimm.glb",
      "model_3d_step": "adc084s021cimm-etched.step",
      "model_3d_step_plain": "adc084s021cimm.step",
      "lbr": "adc084s021cimm.lbr"
    },
    "distributor_links": {
      "lcsc": "C2651331",
      "digikey": "ADC084S021CIMMTR-ND",
      "mouser": "926-ADC084S021CIMM"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T19:05:05Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "ADC084S021CIMMTR-ND",
        "status": "found",
        "lifecycle": "Obsolete"
      },
      "mouser": {
        "pn": "926-ADC084S021CIMM",
        "status": "found",
        "lifecycle": "Obsolete"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "CS",
        "type": "input",
        "description": "Chip select; a conversion begins at the falling edge of CS and conversions continue as long as CS is held low."
      },
      {
        "number": "2",
        "name": "VA",
        "type": "power_in",
        "description": "Positive supply pin that must be connected to a quiet 2.7 V to 5.25 V source and bypassed to GND with a 0.1 µF monolithic capacitor located within 1 cm of the power pin and with a 1 µF capacitor."
      },
      {
        "number": "3",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground return for all signals."
      },
      {
        "number": "4",
        "name": "IN4",
        "type": "input",
        "description": "Analog input channel 4, which can range from 0 V to VA."
      },
      {
        "number": "5",
        "name": "IN3",
        "type": "input",
        "description": "Analog input channel 3, which can range from 0 V to VA."
      },
      {
        "number": "6",
        "name": "IN2",
        "type": "input",
        "description": "Analog input channel 2, which can range from 0 V to VA."
      },
      {
        "number": "7",
        "name": "IN1",
        "type": "input",
        "description": "Analog input channel 1, which can range from 0 V to VA."
      },
      {
        "number": "8",
        "name": "DIN",
        "type": "input",
        "description": "Digital data input through which the control register is loaded on rising edges of SCLK."
      },
      {
        "number": "9",
        "name": "DOUT",
        "type": "output",
        "description": "Digital data output from which the output samples are clocked on falling edges of SCLK."
      },
      {
        "number": "10",
        "name": "SCLK",
        "type": "input",
        "description": "Digital clock input that directly controls the conversion and readout processes."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Package label mismatch: the pin configuration figure and Pin Functions table are titled 'DGK Package; The text does not state the 0.5 mm lead pitch. The package hint 'VSSOP-10-0.5mm' could not be confir; The provided text covers only 7 of 32 pages. Pin 2 (VA) and pin 3 (GND) pin functions are as printed"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0409,
        "at": "2026-10-11T19:04:48"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/adc084s021",
        "pages": 32,
        "sha256": "db9c574b36f5e44d",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 10,
        "described": 10,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "adc084s021cimm.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b8f88eac3ce221c2ccb0b5048f9ad49c2ef4af148f8ae50c4e232e357683f547",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "adc084s021cimm-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          1.1
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f21d8f25aaecfdaaca36b170a8cf67d7b8a5d140ec226e761b02c1303141b7ac",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}