main
History Download
Ray Publish 0.1.0 8fbe483

ADATE305BSVZ

Analog Devices · Pre-ordered Chips · TQFP-100-EP(14x14)

ADATE305BSVZ from Analog Devices, in a TQFP-100-EP(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connect; no physical connection to die.
2 NC unconnected No connect; no physical connection to die.
3 TEMPSENSE output Temperature sense output; the temperature voltage is available on this pin at all times.
4 VDD/VDD_TMPSNS power_in Temperature sense supply, +10.0 V.
5 SCAP1 passive PMU stability capacitor connection for channel 1 (330 pF).
6 FFCAP_1B passive PMU feed-forward capacitor connection B for channel 1 (220 pF).
7 VDD power_in Supply +10.0 V.
8 OVD_CH1 output Overvoltage detection flag output for channel 1.
9 DATA1N input Driver data input (negative) for channel 1.
10 DATA1P input Driver data input (positive) for channel 1.
11 FFCAP_1A passive PMU feedforward capacitor connection A for channel 1 (220 pF).
12 VSS power_in Supply −5.75 V.
13 RCV1N input Receive data input (negative) for channel 1.
14 RCV1P input Receive data input (positive) for channel 1.
15 AGND power_in Analog ground.
16 COMP_QL1P output Low-side comparator output (positive) for channel 1.
17 COMP_QL1N output Low-side comparator output (negative) for channel 1.
18 COMP_VTT1 power_in Comparator supply for channel 1; COMP_VTT is specified from 3.3 V to 5.0 V.
19 COMP_QH1P output High-side comparator output (positive) for channel 1.
20 COMP_QH1N output High-side comparator output (negative) for channel 1.
21 AGND power_in Analog ground.
22 AGND power_in Analog ground.
23 AGND power_in Analog ground.
24 NC unconnected No connect; no physical connection to die.
25 NC unconnected No connect; no physical connection to die.
26 NC unconnected No connect; no physical connection to die.
27 NC unconnected No connect; no physical connection to die.
28 MEASOUT01/TEMP SENSE output Shared muxed output for PMU MEASOUT channel 0, PMU MEASOUT channel 1, and the temperature sense and its GND reference.
29 DUTGND power_in Device under test ground reference.
30 AGND power_in Analog ground.
31 AGND power_in Analog ground.
32 CS input Serial Peripheral Interface (SPI) chip select.
33 DAC16_MON output 16-bit DAC monitor mux output.
34 VSS power_in Supply −5.75 V.
35 VDD power_in Supply +10.0 V.
36 DGND power_in Digital ground.
37 SDOUT output Serial Programmable Interface (SPI) data output.
38 SCLK input Serial Programmable Interface (SPI) clock.
39 SDIN input Serial Programmable Interface (SPI) data input.
40 VDD power_in Supply +10.0 V.
41 VCC power_in Logic supply, +3.3 V (3.1 V to 3.5 V range in the specifications).
42 VSS power_in Supply −5.75 V.
43 RST input Serial Peripheral Interface (SPI) reset.
44 AGND power_in Analog ground.
45 AGND power_in Analog ground.
46 AGND power_in Analog ground.
47 VREF power_in +5 V DAC reference voltage input (4.95 V to 5.05 V range in the specifications).
48 VREF_GND power_in DAC ground reference.
49 NC unconnected No connect; no physical connection to die.
50 NC unconnected No connect; no physical connection to die.
51 NC unconnected No connect; no physical connection to die.
52 NC unconnected No connect; no physical connection to die.
53 AGND power_in Analog ground.
54 AGND power_in Analog ground.
55 AGND power_in Analog ground.
56 COMP_QH0N output High-side comparator output (negative) for channel 0.
57 COMP_QH0P output High-side comparator output (positive) for channel 0.
58 COMP_VTT0 power_in Comparator supply for channel 0; COMP_VTT is specified from 3.3 V to 5.0 V.
59 COMP_QL0N output Low-side comparator output (negative) for channel 0.
60 COMP_QL0P output Low-side comparator output (positive) for channel 0.
61 AGND power_in Analog ground.
62 RCV0P input Receive data input (positive) for channel 0.
63 RCV0N input Receive data input (negative) for channel 0.
64 VSS power_in Supply −5.75 V.
65 FFCAP_0A passive PMU feedforward capacitor connection A for channel 0 (220 pF).
66 DATA0P input Driver data input (positive) for channel 0.
67 DATA0N input Driver data input (negative) for channel 0.
68 OVD_CH0 output Overvoltage detection flag output for channel 0.
69 VDD power_in Supply +10.0 V.
70 FFCAP_0B passive PMU feed-forward capacitor connection B for channel 0 (220 pF).
71 SCAP0 passive PMU stability capacitor connection for channel 0 (330 pF).
72 VPLUS power_in Supply +16.75 V.
73 HVOUT output High voltage driver output (0 V to 13.5 V output range).
74 NC unconnected No connect; no physical connection to die.
75 NC unconnected No connect; no physical connection to die.
76 NC unconnected No connect; no physical connection to die.
77 NC unconnected No connect; no physical connection to die.
78 PMUS_CH0 input PMU external sense path for channel 0.
79 VSS power_in Supply −5.75 V.
80 VDD power_in Supply +10.0 V.
81 VSSO_0 (DRIVE) power_in Driver output supply −5.75 V for channel 0.
82 DUT0 bidirectional Device under test pin for channel 0.
83 VDDO_0 (DRIVE) power_in Driver output supply +10.0 V for channel 0.
84 AGND power_in Analog ground.
85 AGND power_in Analog ground.
86 VSS power_in Supply −5.75 V.
87 VDD power_in Supply +10.0 V.
88 AGND power_in Analog ground.
89 VDD power_in Supply +10.0 V.
90 VSS power_in Supply −5.75 V.
91 AGND power_in Analog ground.
92 AGND power_in Analog ground.
93 VDDO_1 (DRIVE) power_in Driver output supply +10.0 V for channel 1.
94 DUT1 bidirectional Device under test pin for channel 1.
95 VSSO_1 (DRIVE) power_in Driver output supply −5.75 V for channel 1.
96 VDD power_in Supply +10.0 V.
97 VSS power_in Supply −5.75 V.
98 PMUS_CH1 input PMU external sense path for channel 1.
99 NC unconnected No connect; no physical connection to die.
100 NC unconnected No connect; no physical connection to die.
101 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TQFP-100-EP(14x14)
Category Interface ICs
Pins 101

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Total Supply Range, VPLUS to VSS 22.5 23.25 V Defines PSRR conditions 4
VPLUS Supply VPLUS 16.25 16.75 17.25 V Defines PSRR conditions 4
Positive Supply, VDD VDD 9.5 10 10.5 V Defines PSRR conditions 4
Negative Supply, VSS VSS -5.5 -5.25 -5 V Defines PSRR conditions 4
Logic Supply, VCC VCC 3.1 3.3 3.5 V Defines PSRR conditions 4
Comparator Termination, VCOMP_VTT VCOMP_VTT 3.3 5 V 4
VPLUS Supply Current, HVOUT enabled IPLUS 4 12.7 17 mA HVOUT enabled, RCV active, no load, VHH = 12 V 4
Logic Supply Current ICC 1 2.7 10 mA Quiescent (SPI is static) 4
Positive Supply Current, load active off IDD 102 133 154 mA Load active off (IOH = IOL = 12 mA) 4
Negative Supply Current, load active off ISS 130 158 183 mA Load active off (IOH = IOL = 12 mA) 4
Total Power Dissipation, load active off 1.8 2.2 2.5 W Load active off (IOH = IOL = 12 mA) 4
Output Leakage Current, PE Disable Range E -20 5.3 20 nA −1.5 V < VDUTx < +6.0 V; PMU and PE disabled via SPI; PMU Range E, VCH = 7.0 V, VCL = −2.5 V 4
DUT Pin Range -1.5 6 V 4
Reference Input Voltage Range for DACs (VREF Pin) VREF 4.95 5 5.05 V Referenced to VREF_GND; not referenced to VDUTGND 4
High-Speed Differential Input Termination Resistance 92 100 108 Ω Push 6 mA into xP pins, force 1.3 V on xN pins 5
Output High Range, VH VH -1.4 6 V 5
Output Low Range, VL VL -1.5 5.9 V 5
Output Term Range, VT VT -1.5 6 V 5
DC Output Current Limit Source 75 100 120 mA Driver high, VH = 6.0 V, short DUTx pin to −2.0 V 5
DC Output Current Limit Sink -120 -100 -75 mA Driver low, VL = −1.5 V, short DUTx pin to 6.0 V 5
Output Resistance, ±50 mA 45 47 49 Ω Source: driver high, VH = 3.0 V, IDUTx = 1 mA and 50 mA; sink: driver low, VL = 0.0 V, IDUTx = −1 mA and −50 mA 5
VH, VL, VT Uncalibrated Accuracy -250 75 250 mV Error measured at calibration points of 0 V and 5 V 5
VCH Range VCH -1 6 V 7
VCL Range VCL -1.5 5 V 7
DC Clamp Current Limit, VCH VCH -120 -85 -60 mA Driver high-Z, VCH = 0 V, VCL = −1.5 V, VDUTx = +5 V 7
DC Clamp Current Limit, VCL VCL 60 85 120 mA Driver high-Z, VCH = 6.0 V, VCL = 5.0 V, VDUTx = 0.0 V 7
Normal Window Comparator Input Voltage Range -1.5 6 V 7
Differential Comparator Input Voltage Range -1.25 4.5 V 9
VCOM Voltage Range VCOM -1.25 5.75 V 11
Maximum Source Current, IOL IOL 12 mA 11
Maximum Sink Current, IOH IOH 12 mA 11
Output Current Tempco -1.5 1.5 μA/°C Measured at calibration points 11
Force Input Voltage Range at Output, all ranges -1.5 6 V 12
Force Voltage Uncalibrated Accuracy, all ranges -25 25 mV PMU enabled, FV, PE disabled; error at calibration points 0.0 V and 5.0 V 12
PMU Current Range A (FV) -32 32 mA 12
PMU Current Range E (FV) -2 2 μA 12
Current Limit, Source and Sink, Range A 108 140 180 %FS PMU enabled, FV, PE disabled; sink: force 2.5 V, short DUTx to 6.0 V; source: force 2.5 V, short DUTx to −1.0 V 13
Current Limit, Source and Sink, Range B to Range E 120 145 180 %FS PMU enabled, FV, PE disabled; sink: force 2.5 V, short DUTx to 6.0 V; source: force 2.5 V, short DUTx to −1.0 V 13
Force Current Uncalibrated Accuracy, Range A -5 0.5 5 mA PMU enabled, FIMI, Range A, PE disabled; error at calibration points of −25 mA and +25 mA 14
Measure Voltage Uncalibrated Accuracy -25 2 25 mV PMU enabled, FVMV, Range B, PE disabled; error at calibration points 0 V and 5 V 14
Measure Voltage INL -7 1 7 mV PMU enabled, FVMV, Range B, PE disabled; after two-point gain/offset calibration; measured over −1.5 V to +6.0 V 14
Serial Input Logic High 1.8 V 17
Serial Input Logic Low 0 0.7 V 17
HVOUT Output Resistance 1 10 Ω VHH mode enabled, RCV active; source: VHH = 10.0 V, IHVOUT = 0 mA and 15 mA; sink: VHH = 6.5 V, IHVOUT = 0 mA and −15 mA 18
HVOUT DC Output Current Limit Source 60 100 mA VHH mode enabled, RCV active, VHH = 10.0 V, short HVOUT pin to 5.9 V 18
VDD to GND VDD -0.5 11 V 19
VCC to GND VCC -0.5 4 V 19
VSS to GND VSS -6.25 0.5 V 19
Supply Voltage Difference (VDD to VSS) -1 16.5 V 19
Reference Ground (DUTGND to GND) DUTGND -0.5 0.5 V 19
AGND to DGND -0.5 0.5 V 19
VPLUS Supply Voltage (VPLUS to GND) VPLUS -0.5 17.5 V 19
Short-Circuit Voltage -3 8 V RL = 0 Ω, VDUT continuous short-circuit condition (VH, VL, VT, high-Z, VCOM, clamp modes) 19
High Speed Input Voltage 0 V DATAxP, DATAxN, RCVxP, RCVxN, under source R = 0 Ω; upper limit is VCC 19
High Speed Differential Input Voltage 0 V DATAxP to DATAxN, RCVxP, RCVxN; upper limit is VCC 19
VREF VREF -0.5 5.5 V 19
DCL Maximum Short-Circuit Current -140 140 mA RL = 0 Ω, VDUTx = -3 V to +8 V; DCL current limit; continuous short-circuit condition 19
Operating Temperature, Junction TJ 125 °C 19
Storage Temperature Range TSTG -65 150 °C 19
Thermal Resistance, θJA θJA 33 °C/W Natural convection 19
Thermal Resistance, θJC θJC 1.1 °C/W For liquid cooled applications 19

CAD (KiCad official)

  • Symbol: ADATE305BSVZ
  • Footprint: Package_QFP:TQFP-100-1EP_14x14mm_P0.5mm_EP5x5mm
  • 3D model: TQFP-100-EP(14x14) (KiCad packages3D, STEP)
  • 3D model files: adate305bsvz-etched.step / adate305bsvz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adate305bsvz.step / adate305bsvz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (56 pp, sha256 9ff233daee7c0972, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF