component
ADATE305BSVZ
Public Made by Adomby adom
Analog Devices Pre-ordered Chips, TQFP-100-EP(14x14). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
ADATE305BSVZ
Analog Devices · Pre-ordered Chips · TQFP-100-EP(14x14)
ADATE305BSVZ from Analog Devices, in a TQFP-100-EP(14x14). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect; no physical connection to die. |
| 2 | NC | unconnected | No connect; no physical connection to die. |
| 3 | TEMPSENSE | output | Temperature sense output; the temperature voltage is available on this pin at all times. |
| 4 | VDD/VDD_TMPSNS | power_in | Temperature sense supply, +10.0 V. |
| 5 | SCAP1 | passive | PMU stability capacitor connection for channel 1 (330 pF). |
| 6 | FFCAP_1B | passive | PMU feed-forward capacitor connection B for channel 1 (220 pF). |
| 7 | VDD | power_in | Supply +10.0 V. |
| 8 | OVD_CH1 | output | Overvoltage detection flag output for channel 1. |
| 9 | DATA1N | input | Driver data input (negative) for channel 1. |
| 10 | DATA1P | input | Driver data input (positive) for channel 1. |
| 11 | FFCAP_1A | passive | PMU feedforward capacitor connection A for channel 1 (220 pF). |
| 12 | VSS | power_in | Supply −5.75 V. |
| 13 | RCV1N | input | Receive data input (negative) for channel 1. |
| 14 | RCV1P | input | Receive data input (positive) for channel 1. |
| 15 | AGND | power_in | Analog ground. |
| 16 | COMP_QL1P | output | Low-side comparator output (positive) for channel 1. |
| 17 | COMP_QL1N | output | Low-side comparator output (negative) for channel 1. |
| 18 | COMP_VTT1 | power_in | Comparator supply for channel 1; COMP_VTT is specified from 3.3 V to 5.0 V. |
| 19 | COMP_QH1P | output | High-side comparator output (positive) for channel 1. |
| 20 | COMP_QH1N | output | High-side comparator output (negative) for channel 1. |
| 21 | AGND | power_in | Analog ground. |
| 22 | AGND | power_in | Analog ground. |
| 23 | AGND | power_in | Analog ground. |
| 24 | NC | unconnected | No connect; no physical connection to die. |
| 25 | NC | unconnected | No connect; no physical connection to die. |
| 26 | NC | unconnected | No connect; no physical connection to die. |
| 27 | NC | unconnected | No connect; no physical connection to die. |
| 28 | MEASOUT01/TEMP SENSE | output | Shared muxed output for PMU MEASOUT channel 0, PMU MEASOUT channel 1, and the temperature sense and its GND reference. |
| 29 | DUTGND | power_in | Device under test ground reference. |
| 30 | AGND | power_in | Analog ground. |
| 31 | AGND | power_in | Analog ground. |
| 32 | CS | input | Serial Peripheral Interface (SPI) chip select. |
| 33 | DAC16_MON | output | 16-bit DAC monitor mux output. |
| 34 | VSS | power_in | Supply −5.75 V. |
| 35 | VDD | power_in | Supply +10.0 V. |
| 36 | DGND | power_in | Digital ground. |
| 37 | SDOUT | output | Serial Programmable Interface (SPI) data output. |
| 38 | SCLK | input | Serial Programmable Interface (SPI) clock. |
| 39 | SDIN | input | Serial Programmable Interface (SPI) data input. |
| 40 | VDD | power_in | Supply +10.0 V. |
| 41 | VCC | power_in | Logic supply, +3.3 V (3.1 V to 3.5 V range in the specifications). |
| 42 | VSS | power_in | Supply −5.75 V. |
| 43 | RST | input | Serial Peripheral Interface (SPI) reset. |
| 44 | AGND | power_in | Analog ground. |
| 45 | AGND | power_in | Analog ground. |
| 46 | AGND | power_in | Analog ground. |
| 47 | VREF | power_in | +5 V DAC reference voltage input (4.95 V to 5.05 V range in the specifications). |
| 48 | VREF_GND | power_in | DAC ground reference. |
| 49 | NC | unconnected | No connect; no physical connection to die. |
| 50 | NC | unconnected | No connect; no physical connection to die. |
| 51 | NC | unconnected | No connect; no physical connection to die. |
| 52 | NC | unconnected | No connect; no physical connection to die. |
| 53 | AGND | power_in | Analog ground. |
| 54 | AGND | power_in | Analog ground. |
| 55 | AGND | power_in | Analog ground. |
| 56 | COMP_QH0N | output | High-side comparator output (negative) for channel 0. |
| 57 | COMP_QH0P | output | High-side comparator output (positive) for channel 0. |
| 58 | COMP_VTT0 | power_in | Comparator supply for channel 0; COMP_VTT is specified from 3.3 V to 5.0 V. |
| 59 | COMP_QL0N | output | Low-side comparator output (negative) for channel 0. |
| 60 | COMP_QL0P | output | Low-side comparator output (positive) for channel 0. |
| 61 | AGND | power_in | Analog ground. |
| 62 | RCV0P | input | Receive data input (positive) for channel 0. |
| 63 | RCV0N | input | Receive data input (negative) for channel 0. |
| 64 | VSS | power_in | Supply −5.75 V. |
| 65 | FFCAP_0A | passive | PMU feedforward capacitor connection A for channel 0 (220 pF). |
| 66 | DATA0P | input | Driver data input (positive) for channel 0. |
| 67 | DATA0N | input | Driver data input (negative) for channel 0. |
| 68 | OVD_CH0 | output | Overvoltage detection flag output for channel 0. |
| 69 | VDD | power_in | Supply +10.0 V. |
| 70 | FFCAP_0B | passive | PMU feed-forward capacitor connection B for channel 0 (220 pF). |
| 71 | SCAP0 | passive | PMU stability capacitor connection for channel 0 (330 pF). |
| 72 | VPLUS | power_in | Supply +16.75 V. |
| 73 | HVOUT | output | High voltage driver output (0 V to 13.5 V output range). |
| 74 | NC | unconnected | No connect; no physical connection to die. |
| 75 | NC | unconnected | No connect; no physical connection to die. |
| 76 | NC | unconnected | No connect; no physical connection to die. |
| 77 | NC | unconnected | No connect; no physical connection to die. |
| 78 | PMUS_CH0 | input | PMU external sense path for channel 0. |
| 79 | VSS | power_in | Supply −5.75 V. |
| 80 | VDD | power_in | Supply +10.0 V. |
| 81 | VSSO_0 (DRIVE) | power_in | Driver output supply −5.75 V for channel 0. |
| 82 | DUT0 | bidirectional | Device under test pin for channel 0. |
| 83 | VDDO_0 (DRIVE) | power_in | Driver output supply +10.0 V for channel 0. |
| 84 | AGND | power_in | Analog ground. |
| 85 | AGND | power_in | Analog ground. |
| 86 | VSS | power_in | Supply −5.75 V. |
| 87 | VDD | power_in | Supply +10.0 V. |
| 88 | AGND | power_in | Analog ground. |
| 89 | VDD | power_in | Supply +10.0 V. |
| 90 | VSS | power_in | Supply −5.75 V. |
| 91 | AGND | power_in | Analog ground. |
| 92 | AGND | power_in | Analog ground. |
| 93 | VDDO_1 (DRIVE) | power_in | Driver output supply +10.0 V for channel 1. |
| 94 | DUT1 | bidirectional | Device under test pin for channel 1. |
| 95 | VSSO_1 (DRIVE) | power_in | Driver output supply −5.75 V for channel 1. |
| 96 | VDD | power_in | Supply +10.0 V. |
| 97 | VSS | power_in | Supply −5.75 V. |
| 98 | PMUS_CH1 | input | PMU external sense path for channel 1. |
| 99 | NC | unconnected | No connect; no physical connection to die. |
| 100 | NC | unconnected | No connect; no physical connection to die. |
| 101 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TQFP-100-EP(14x14) |
| Category | Interface ICs |
| Pins | 101 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Total Supply Range, VPLUS to VSS | 22.5 | 23.25 | V | Defines PSRR conditions | 4 | ||
| VPLUS Supply | VPLUS | 16.25 | 16.75 | 17.25 | V | Defines PSRR conditions | 4 |
| Positive Supply, VDD | VDD | 9.5 | 10 | 10.5 | V | Defines PSRR conditions | 4 |
| Negative Supply, VSS | VSS | -5.5 | -5.25 | -5 | V | Defines PSRR conditions | 4 |
| Logic Supply, VCC | VCC | 3.1 | 3.3 | 3.5 | V | Defines PSRR conditions | 4 |
| Comparator Termination, VCOMP_VTT | VCOMP_VTT | 3.3 | 5 | V | 4 | ||
| VPLUS Supply Current, HVOUT enabled | IPLUS | 4 | 12.7 | 17 | mA | HVOUT enabled, RCV active, no load, VHH = 12 V | 4 |
| Logic Supply Current | ICC | 1 | 2.7 | 10 | mA | Quiescent (SPI is static) | 4 |
| Positive Supply Current, load active off | IDD | 102 | 133 | 154 | mA | Load active off (IOH = IOL = 12 mA) | 4 |
| Negative Supply Current, load active off | ISS | 130 | 158 | 183 | mA | Load active off (IOH = IOL = 12 mA) | 4 |
| Total Power Dissipation, load active off | 1.8 | 2.2 | 2.5 | W | Load active off (IOH = IOL = 12 mA) | 4 | |
| Output Leakage Current, PE Disable Range E | -20 | 5.3 | 20 | nA | −1.5 V < VDUTx < +6.0 V; PMU and PE disabled via SPI; PMU Range E, VCH = 7.0 V, VCL = −2.5 V | 4 | |
| DUT Pin Range | -1.5 | 6 | V | 4 | |||
| Reference Input Voltage Range for DACs (VREF Pin) | VREF | 4.95 | 5 | 5.05 | V | Referenced to VREF_GND; not referenced to VDUTGND | 4 |
| High-Speed Differential Input Termination Resistance | 92 | 100 | 108 | Ω | Push 6 mA into xP pins, force 1.3 V on xN pins | 5 | |
| Output High Range, VH | VH | -1.4 | 6 | V | 5 | ||
| Output Low Range, VL | VL | -1.5 | 5.9 | V | 5 | ||
| Output Term Range, VT | VT | -1.5 | 6 | V | 5 | ||
| DC Output Current Limit Source | 75 | 100 | 120 | mA | Driver high, VH = 6.0 V, short DUTx pin to −2.0 V | 5 | |
| DC Output Current Limit Sink | -120 | -100 | -75 | mA | Driver low, VL = −1.5 V, short DUTx pin to 6.0 V | 5 | |
| Output Resistance, ±50 mA | 45 | 47 | 49 | Ω | Source: driver high, VH = 3.0 V, IDUTx = 1 mA and 50 mA; sink: driver low, VL = 0.0 V, IDUTx = −1 mA and −50 mA | 5 | |
| VH, VL, VT Uncalibrated Accuracy | -250 | 75 | 250 | mV | Error measured at calibration points of 0 V and 5 V | 5 | |
| VCH Range | VCH | -1 | 6 | V | 7 | ||
| VCL Range | VCL | -1.5 | 5 | V | 7 | ||
| DC Clamp Current Limit, VCH | VCH | -120 | -85 | -60 | mA | Driver high-Z, VCH = 0 V, VCL = −1.5 V, VDUTx = +5 V | 7 |
| DC Clamp Current Limit, VCL | VCL | 60 | 85 | 120 | mA | Driver high-Z, VCH = 6.0 V, VCL = 5.0 V, VDUTx = 0.0 V | 7 |
| Normal Window Comparator Input Voltage Range | -1.5 | 6 | V | 7 | |||
| Differential Comparator Input Voltage Range | -1.25 | 4.5 | V | 9 | |||
| VCOM Voltage Range | VCOM | -1.25 | 5.75 | V | 11 | ||
| Maximum Source Current, IOL | IOL | 12 | mA | 11 | |||
| Maximum Sink Current, IOH | IOH | 12 | mA | 11 | |||
| Output Current Tempco | -1.5 | 1.5 | μA/°C | Measured at calibration points | 11 | ||
| Force Input Voltage Range at Output, all ranges | -1.5 | 6 | V | 12 | |||
| Force Voltage Uncalibrated Accuracy, all ranges | -25 | 25 | mV | PMU enabled, FV, PE disabled; error at calibration points 0.0 V and 5.0 V | 12 | ||
| PMU Current Range A (FV) | -32 | 32 | mA | 12 | |||
| PMU Current Range E (FV) | -2 | 2 | μA | 12 | |||
| Current Limit, Source and Sink, Range A | 108 | 140 | 180 | %FS | PMU enabled, FV, PE disabled; sink: force 2.5 V, short DUTx to 6.0 V; source: force 2.5 V, short DUTx to −1.0 V | 13 | |
| Current Limit, Source and Sink, Range B to Range E | 120 | 145 | 180 | %FS | PMU enabled, FV, PE disabled; sink: force 2.5 V, short DUTx to 6.0 V; source: force 2.5 V, short DUTx to −1.0 V | 13 | |
| Force Current Uncalibrated Accuracy, Range A | -5 | 0.5 | 5 | mA | PMU enabled, FIMI, Range A, PE disabled; error at calibration points of −25 mA and +25 mA | 14 | |
| Measure Voltage Uncalibrated Accuracy | -25 | 2 | 25 | mV | PMU enabled, FVMV, Range B, PE disabled; error at calibration points 0 V and 5 V | 14 | |
| Measure Voltage INL | -7 | 1 | 7 | mV | PMU enabled, FVMV, Range B, PE disabled; after two-point gain/offset calibration; measured over −1.5 V to +6.0 V | 14 | |
| Serial Input Logic High | 1.8 | V | 17 | ||||
| Serial Input Logic Low | 0 | 0.7 | V | 17 | |||
| HVOUT Output Resistance | 1 | 10 | Ω | VHH mode enabled, RCV active; source: VHH = 10.0 V, IHVOUT = 0 mA and 15 mA; sink: VHH = 6.5 V, IHVOUT = 0 mA and −15 mA | 18 | ||
| HVOUT DC Output Current Limit Source | 60 | 100 | mA | VHH mode enabled, RCV active, VHH = 10.0 V, short HVOUT pin to 5.9 V | 18 | ||
| VDD to GND | VDD | -0.5 | 11 | V | 19 | ||
| VCC to GND | VCC | -0.5 | 4 | V | 19 | ||
| VSS to GND | VSS | -6.25 | 0.5 | V | 19 | ||
| Supply Voltage Difference (VDD to VSS) | -1 | 16.5 | V | 19 | |||
| Reference Ground (DUTGND to GND) | DUTGND | -0.5 | 0.5 | V | 19 | ||
| AGND to DGND | -0.5 | 0.5 | V | 19 | |||
| VPLUS Supply Voltage (VPLUS to GND) | VPLUS | -0.5 | 17.5 | V | 19 | ||
| Short-Circuit Voltage | -3 | 8 | V | RL = 0 Ω, VDUT continuous short-circuit condition (VH, VL, VT, high-Z, VCOM, clamp modes) | 19 | ||
| High Speed Input Voltage | 0 | V | DATAxP, DATAxN, RCVxP, RCVxN, under source R = 0 Ω; upper limit is VCC | 19 | |||
| High Speed Differential Input Voltage | 0 | V | DATAxP to DATAxN, RCVxP, RCVxN; upper limit is VCC | 19 | |||
| VREF | VREF | -0.5 | 5.5 | V | 19 | ||
| DCL Maximum Short-Circuit Current | -140 | 140 | mA | RL = 0 Ω, VDUTx = -3 V to +8 V; DCL current limit; continuous short-circuit condition | 19 | ||
| Operating Temperature, Junction | TJ | 125 | °C | 19 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 19 | ||
| Thermal Resistance, θJA | θJA | 33 | °C/W | Natural convection | 19 | ||
| Thermal Resistance, θJC | θJC | 1.1 | °C/W | For liquid cooled applications | 19 |
CAD (KiCad official)
- Symbol:
ADATE305BSVZ - Footprint:
Package_QFP:TQFP-100-1EP_14x14mm_P0.5mm_EP5x5mm - 3D model: TQFP-100-EP(14x14) (KiCad packages3D, STEP)
- 3D model files:
adate305bsvz-etched.step/adate305bsvz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adate305bsvz.step/adate305bsvz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (56 pp, sha256
9ff233daee7c0972, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).