Generated by kicad-footprint-generator · KiCad file format 20260206
ADA4430-1WYRTZ-R7
Analog Devices · Video Amplifiers · SOT-23-6
ADA4430-1WYRTZ-R7 from Analog Devices, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Input voltage to the high-impedance (10 MΩ, 1 pF) input buffer; usable range is 0 V up to a limit set by the output range (0/1.38 V at VS = 3 V). |
| 2 | GND | power_in | Ground; also the internal return of the 5.2 kΩ output-buffer feedback network, and should be connected to the ground plane with a trace as short as possible. |
| 3 | SAG | passive | Feedback connection; tie directly to VOUT for gain of 2, or use the SAG correction network for low-frequency gain of 2.5 with ac-coupled outputs. |
| 4 | VOUT | output | Rail-to-rail output voltage with 40 mA linear output current, driving 150 Ω loads. |
| 5 | DIS | input | Disable input; device is disabled below 0.7 V and enabled above 1.1 V at VS = 3 V (0.8 V and 1 V at VS = 5 V). |
| 6 | VS | power_in | Positive power supply, 2.5 V to 6 V, decoupled with a 0.1 µF ceramic capacitor placed close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-6 |
| Category | Operational Amplifier/Comparator |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Quiescent Supply Current (VS=3V, TMIN to TMAX) | IS | 1.85 | 3 | mA | VS = 3 V; ADA4430-1W only: TMIN to TMAX | 3 | |
| Quiescent Supply Current, Disabled (VS=3V, TMIN to TMAX) | 0.1 | 6 | μA | VS = 3 V; ADA4430-1W only: TMIN to TMAX | 3 | ||
| Supply Voltage | VS | 2.5 | 6 | V | ADA4430-1W only: TMIN to TMAX | 3 | |
| Output Offset Voltage (VS=3V, TMIN to TMAX) | 95 | 200 | mV | VS = 3 V; ADA4430-1W only: TMIN to TMAX | 3 | ||
| PSRR (VS=3V) | PSRR | 50 | 60 | dB | VS = 3 V; Input referred, ADA4430-1W only: TMIN to TMAX | 3 | |
| Pass-Band Gain (VS=3V) | 5.85 | 6 | dB | VS = 3 V; ADA4430-1W only: TMIN to TMAX | 3 | ||
| -3 dB Bandwidth (VS=3V) | 7 | 9.7 | MHz | VS = 3 V; ADA4430-1W only: TMIN to TMAX | 3 | ||
| 1 dB Flatness (VS=3V) | 5.5 | 8 | MHz | VS = 3 V; ADA4430-1W only: TMIN to TMAX | 3 | ||
| Out-of-Band Rejection (VS=3V) | 40 | 50 | dB | VS = 3 V; f = 27 MHz; ADA4430-1W only: TMIN to TMAX | 3 | ||
| Quiescent Supply Current (VS=5V, TMIN to TMAX) | IS | 2 | 3.1 | mA | VS = 5 V; ADA4430-1W only: TMIN to TMAX | 4 | |
| Quiescent Supply Current, Disabled (VS=5V, TMIN to TMAX) | 0.2 | 15 | μA | VS = 5 V; ADA4430-1W only: TMIN to TMAX | 4 | ||
| Supply Voltage (VS=5V table) | VS | 2.5 | 6 | V | VS = 5 V table; ADA4430-1W only: TMIN to TMAX | 4 | |
| Output Offset Voltage (VS=5V, TMIN to TMAX) | 100 | 200 | mV | VS = 5 V; ADA4430-1W only: TMIN to TMAX | 4 | ||
| PSRR (VS=5V) | PSRR | 50 | 61 | dB | VS = 5 V; Input referred, ADA4430-1W only: TMIN to TMAX | 4 | |
| Pass-Band Gain (VS=5V) | 5.85 | 6 | dB | VS = 5 V; ADA4430-1W only: TMIN to TMAX | 4 | ||
| -3 dB Bandwidth (VS=5V) | 7.2 | 9.5 | MHz | VS = 5 V; ADA4430-1W only: TMIN to TMAX | 4 | ||
| 1 dB Flatness (VS=5V) | 5.5 | 7.9 | MHz | VS = 5 V; ADA4430-1W only: TMIN to TMAX | 4 | ||
| Out-of-Band Rejection (VS=5V) | 40 | 50 | dB | VS = 5 V; f = 27 MHz, ADA4430-1W only: TMIN to TMAX | 4 | ||
| Supply Voltage | VS | 6 | V | 5 | |||
| Storage Temperature Range | -65 | 125 | °C | 5 | |||
| Operating Temperature Range | -40 | 125 | °C | 5 | |||
| Lead Temperature (Soldering 10 sec) | 300 | °C | Soldering 10 sec | 5 | |||
| Junction Temperature | TJ | 150 | °C | 5 | |||
| Thermal Resistance, 6-Lead SOT-23 | θJA | 170 | °C/W | JEDEC 4-layer board | 5 | ||
| Input Voltage Range, Low/High (VS=3V) | 1.38 | V | VS = 3 V; typ 0/1.38 V | 3 | |||
| Input Resistance | 10 | MΩ | 3 | ||||
| Input Capacitance | 1 | pF | 3 | ||||
| Input Bias Current | 0.5 | μA | 3 | ||||
| Input-to-Output Isolation, Disabled | 92 | dB | f = 1 MHz | 3 | |||
| Linear Output Current | 40 | mA | VS = 3 V | 3 | |||
| Differential Gain (VS=3V) | 0.25 | % | Modulated 10-step ramp, sync tip at 0 V | 3 | |||
| Differential Phase (VS=3V) | 0.1 | Degrees | Modulated 10-step ramp, sync tip at 0 V | 3 | |||
| Group Delay Variation (VS=3V) | 7 | ns | f = 100 kHz to 5 MHz | 3 | |||
| Signal-to-Noise Ratio (VS=3V) | 76 | dB | 100% white signal, f = 100 kHz to 5 MHz | 3 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
ADA4430-1WYRTZ-R7 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ada4430-1wyrtz-r7-etched.step/ada4430-1wyrtz-r7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ada4430-1wyrtz-r7.step/ada4430-1wyrtz-r7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
41ea4a65f2b46de4, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).