Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ADA4430-1WYRTZ-R7

Analog Devices · Video Amplifiers · SOT-23-6

ADA4430-1WYRTZ-R7 from Analog Devices, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VIN power_in Input voltage to the high-impedance (10 MΩ, 1 pF) input buffer; usable range is 0 V up to a limit set by the output range (0/1.38 V at VS = 3 V).
2 GND power_in Ground; also the internal return of the 5.2 kΩ output-buffer feedback network, and should be connected to the ground plane with a trace as short as possible.
3 SAG passive Feedback connection; tie directly to VOUT for gain of 2, or use the SAG correction network for low-frequency gain of 2.5 with ac-coupled outputs.
4 VOUT output Rail-to-rail output voltage with 40 mA linear output current, driving 150 Ω loads.
5 DIS input Disable input; device is disabled below 0.7 V and enabled above 1.1 V at VS = 3 V (0.8 V and 1 V at VS = 5 V).
6 VS power_in Positive power supply, 2.5 V to 6 V, decoupled with a 0.1 µF ceramic capacitor placed close to the pin.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOT-23-6
Category Operational Amplifier/Comparator
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Quiescent Supply Current (VS=3V, TMIN to TMAX) IS 1.85 3 mA VS = 3 V; ADA4430-1W only: TMIN to TMAX 3
Quiescent Supply Current, Disabled (VS=3V, TMIN to TMAX) 0.1 6 μA VS = 3 V; ADA4430-1W only: TMIN to TMAX 3
Supply Voltage VS 2.5 6 V ADA4430-1W only: TMIN to TMAX 3
Output Offset Voltage (VS=3V, TMIN to TMAX) 95 200 mV VS = 3 V; ADA4430-1W only: TMIN to TMAX 3
PSRR (VS=3V) PSRR 50 60 dB VS = 3 V; Input referred, ADA4430-1W only: TMIN to TMAX 3
Pass-Band Gain (VS=3V) 5.85 6 dB VS = 3 V; ADA4430-1W only: TMIN to TMAX 3
-3 dB Bandwidth (VS=3V) 7 9.7 MHz VS = 3 V; ADA4430-1W only: TMIN to TMAX 3
1 dB Flatness (VS=3V) 5.5 8 MHz VS = 3 V; ADA4430-1W only: TMIN to TMAX 3
Out-of-Band Rejection (VS=3V) 40 50 dB VS = 3 V; f = 27 MHz; ADA4430-1W only: TMIN to TMAX 3
Quiescent Supply Current (VS=5V, TMIN to TMAX) IS 2 3.1 mA VS = 5 V; ADA4430-1W only: TMIN to TMAX 4
Quiescent Supply Current, Disabled (VS=5V, TMIN to TMAX) 0.2 15 μA VS = 5 V; ADA4430-1W only: TMIN to TMAX 4
Supply Voltage (VS=5V table) VS 2.5 6 V VS = 5 V table; ADA4430-1W only: TMIN to TMAX 4
Output Offset Voltage (VS=5V, TMIN to TMAX) 100 200 mV VS = 5 V; ADA4430-1W only: TMIN to TMAX 4
PSRR (VS=5V) PSRR 50 61 dB VS = 5 V; Input referred, ADA4430-1W only: TMIN to TMAX 4
Pass-Band Gain (VS=5V) 5.85 6 dB VS = 5 V; ADA4430-1W only: TMIN to TMAX 4
-3 dB Bandwidth (VS=5V) 7.2 9.5 MHz VS = 5 V; ADA4430-1W only: TMIN to TMAX 4
1 dB Flatness (VS=5V) 5.5 7.9 MHz VS = 5 V; ADA4430-1W only: TMIN to TMAX 4
Out-of-Band Rejection (VS=5V) 40 50 dB VS = 5 V; f = 27 MHz, ADA4430-1W only: TMIN to TMAX 4
Supply Voltage VS 6 V 5
Storage Temperature Range -65 125 °C 5
Operating Temperature Range -40 125 °C 5
Lead Temperature (Soldering 10 sec) 300 °C Soldering 10 sec 5
Junction Temperature TJ 150 °C 5
Thermal Resistance, 6-Lead SOT-23 θJA 170 °C/W JEDEC 4-layer board 5
Input Voltage Range, Low/High (VS=3V) 1.38 V VS = 3 V; typ 0/1.38 V 3
Input Resistance 10 MΩ 3
Input Capacitance 1 pF 3
Input Bias Current 0.5 μA 3
Input-to-Output Isolation, Disabled 92 dB f = 1 MHz 3
Linear Output Current 40 mA VS = 3 V 3
Differential Gain (VS=3V) 0.25 % Modulated 10-step ramp, sync tip at 0 V 3
Differential Phase (VS=3V) 0.1 Degrees Modulated 10-step ramp, sync tip at 0 V 3
Group Delay Variation (VS=3V) 7 ns f = 100 kHz to 5 MHz 3
Signal-to-Noise Ratio (VS=3V) 76 dB 100% white signal, f = 100 kHz to 5 MHz 3

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: ADA4430-1WYRTZ-R7
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.2 mm tall, datasheet A, midpoint of min and max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ada4430-1wyrtz-r7-etched.step / ada4430-1wyrtz-r7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ada4430-1wyrtz-r7.step / ada4430-1wyrtz-r7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 41ea4a65f2b46de4, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF