main
Ray
Publish 0.1.0
041056c
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362
{
"slug": "ad9851brsz",
"version": "0.1.0",
"type": "component",
"description": "Analog Devices Direct Digital Synthesis (DDS), SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"data converters",
"ad9851brsz",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"ad9851brsz.kicad_sym",
"ad9851brsz.kicad_mod",
"ad9851brsz.glb",
"ad9851brsz.step",
"ad9851brsz.lbr",
"docs/hero.png",
"docs/ad9851brsz-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"ad9851brsz-hero.glb",
"ad9851brsz-hero.overlay.json",
"ad9851brsz-etched.glb"
],
"component": {
"mpn": "AD9851BRSZ",
"manufacturer": "Analog Devices",
"package": "SSOP-28-208mil",
"pin_count": 28,
"category": "Data Converters",
"subcategory": "Direct Digital Synthesis (DDS)",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD9851.pdf",
"parts": {
"symbol": "ad9851brsz.kicad_sym",
"footprint": "ad9851brsz.kicad_mod",
"model_3d": "ad9851brsz-hero.glb",
"model_3d_plain": "ad9851brsz-etched.glb",
"model_3d_step": "ad9851brsz-etched.step",
"model_3d_step_plain": "ad9851brsz.step",
"lbr": "ad9851brsz.lbr"
},
"distributor_links": {
"lcsc": "C1522098",
"digikey": "505-AD9851BRSZ-ND",
"mouser": "584-AD9851BRSZ"
},
"distributor_check": {
"checked_at": "2026-11-12T07:19:34Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "505-AD9851BRSZ-ND",
"status": "found"
},
"mouser": {
"pn": "584-AD9851BRSZ",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "D3",
"type": "input",
"description": "Bit 3 of the 8-bit parallel data input port used to load the 32-bit frequency tuning word and 8-bit phase/control words."
},
{
"number": "2",
"name": "D2",
"type": "input",
"description": "Bit 2 of the 8-bit parallel data input port used to load the 32-bit frequency tuning word and 8-bit phase/control words."
},
{
"number": "3",
"name": "D1",
"type": "input",
"description": "Bit 1 of the 8-bit parallel data input port used to load the 32-bit frequency tuning word and 8-bit phase/control words."
},
{
"number": "4",
"name": "D0",
"type": "input",
"description": "LSB of the 8-bit parallel data input port used to load the 32-bit frequency tuning word and 8-bit phase/control words."
},
{
"number": "5",
"name": "PGND",
"type": "power_in",
"description": "Ground connection for the 6 REFCLK Multiplier."
},
{
"number": "6",
"name": "PVCC",
"type": "power_in",
"description": "Positive supply voltage pin for the 6 REFCLK Multiplier."
},
{
"number": "7",
"name": "W_CLK",
"type": "input",
"description": "Word Load Clock; the rising edge loads the parallel or serial frequency/phase/control words asynchronously into the 40-bit input register."
},
{
"number": "8",
"name": "FQ_UD",
"type": "input",
"description": "Frequency Update; a rising edge asynchronously transfers the 40-bit input register contents to the DDS core and should be issued only when the register holds valid, allowable data."
},
{
"number": "9",
"name": "REFCLOCK",
"type": "input",
"description": "Reference clock input accepting a CMOS/TTL-level pulse train, direct or via the 6 REFCLK Multiplier; in direct mode it is also the system clock."
},
{
"number": "10",
"name": "AGND",
"type": "power_in",
"description": "Analog ground, the ground return for the DAC and comparator analog circuitry."
},
{
"number": "11",
"name": "AVDD",
"type": "power_in",
"description": "Positive supply voltage for the bandgap voltage reference."
},
{
"number": "12",
"name": "RSET",
"type": "passive",
"description": "External DAC RSET connection, nominally a 3.92 k resistor to ground for 10 mA output; RSET = 39.93/IOUT."
},
{
"number": "13",
"name": "VOUTN",
"type": "output",
"description": "Comparator complementary CMOS logic level output."
},
{
"number": "14",
"name": "VOUTP",
"type": "output",
"description": "Comparator true CMOS logic level output."
},
{
"number": "15",
"name": "VINN",
"type": "input",
"description": "Comparator inverting input."
},
{
"number": "16",
"name": "VINP",
"type": "input",
"description": "Comparator noninverting input."
},
{
"number": "17",
"name": "DACBP",
"type": "passive",
"description": "DAC voltage reference bypass connection, normally left NC (no connect) for optimum SFDR performance."
},
{
"number": "18",
"name": "AVDD",
"type": "power_in",
"description": "Positive supply voltage for the analog circuitry (DAC and comparator)."
},
{
"number": "19",
"name": "AGND",
"type": "power_in",
"description": "Analog ground, the ground return for the DAC and comparator analog circuitry."
},
{
"number": "20",
"name": "IOUTB",
"type": "output",
"description": "Complementary DAC output with IOUTB = (full-scale output - IOUT); its load should equal that of IOUT for best SFDR performance."
},
{
"number": "21",
"name": "IOUT",
"type": "output",
"description": "True balanced DAC output; current is sourcing and requires current-to-voltage conversion, usually a resistor or transformer referenced to GND."
},
{
"number": "22",
"name": "RESET",
"type": "input",
"description": "Active-high master reset that clears the DDS accumulator and phase offset register, sets parallel mode and disengages the 6 REFCLK Multiplier, without clearing the 40-bit input register."
},
{
"number": "23",
"name": "DVDD",
"type": "power_in",
"description": "Positive supply voltage pin for the digital circuitry."
},
{
"number": "24",
"name": "DGND",
"type": "power_in",
"description": "Ground return pin for the digital circuitry."
},
{
"number": "25",
"name": "D7",
"type": "input",
"description": "MSB of the 8-bit parallel data input port; also serves as the input pin for the 40-bit serial data word."
},
{
"number": "26",
"name": "D6",
"type": "input",
"description": "Bit 6 of the 8-bit parallel data input port used to load the 32-bit frequency tuning word and 8-bit phase/control words."
},
{
"number": "27",
"name": "D5",
"type": "input",
"description": "Bit 5 of the 8-bit parallel data input port used to load the 32-bit frequency tuning word and 8-bit phase/control words."
},
{
"number": "28",
"name": "D4",
"type": "input",
"description": "Bit 4 of the 8-bit parallel data input port used to load the 32-bit frequency tuning word and 8-bit phase/control words."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The MPN suffix 'Z' (AD9851BRSZ) does not appear in the excerpt. The ordering guide lists only AD9851; The package hint 'SSOP-28-208mil' is not stated in the excerpt. The outline is given only as 28-Lead; Pins 26, 27 and 28 (D6, D5, D4) are inferred from the printed range '28–25, D0–D7' with D7 on pin 25"
],
"pages_sent": 5,
"cost_usd": 0.0054,
"at": "2026-11-12T07:19:25"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD9851.pdf",
"pages": 24,
"sha256": "83f089d19aed0c14",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 28,
"described": 28,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "ad9851brsz.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.8,
10.2,
2.1
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "ad9851brsz-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.8,
10.2,
2.1
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "ed418e9c00e7033b884e8deada372c5e7fc20ab9704c0387f6a281eb60201582",
"checked": "2026-11-12",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "RS-28",
"source_page": 24,
"D": {
"nom_mm": 10.2,
"range_mm": [
9.9,
10.5
]
},
"E1": {
"nom_mm": 5.3,
"range_mm": [
5.0,
5.6
]
},
"E": {
"nom_mm": 7.8,
"range_mm": [
7.4,
8.2
]
},
"e": {
"nom_mm": 0.65,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 2.0,
"range_mm": [
null,
2.0
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "ad9851brsz.step",
"verdict": "PASS",
"reasons": [
"height and body within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}