Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

AD9851BRSZ

Analog Devices · Direct Digital Synthesis (DDS) · SSOP-28-208mil

AD9851BRSZ from Analog Devices, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 D3 input Bit 3 of the 8-bit parallel data input port used to load the 32-bit frequency tuning word and 8-bit phase/control words.
2 D2 input Bit 2 of the 8-bit parallel data input port used to load the 32-bit frequency tuning word and 8-bit phase/control words.
3 D1 input Bit 1 of the 8-bit parallel data input port used to load the 32-bit frequency tuning word and 8-bit phase/control words.
4 D0 input LSB of the 8-bit parallel data input port used to load the 32-bit frequency tuning word and 8-bit phase/control words.
5 PGND power_in Ground connection for the 6 REFCLK Multiplier.
6 PVCC power_in Positive supply voltage pin for the 6 REFCLK Multiplier.
7 W_CLK input Word Load Clock; the rising edge loads the parallel or serial frequency/phase/control words asynchronously into the 40-bit input register.
8 FQ_UD input Frequency Update; a rising edge asynchronously transfers the 40-bit input register contents to the DDS core and should be issued only when the register holds valid, allowable data.
9 REFCLOCK input Reference clock input accepting a CMOS/TTL-level pulse train, direct or via the 6 REFCLK Multiplier; in direct mode it is also the system clock.
10 AGND power_in Analog ground, the ground return for the DAC and comparator analog circuitry.
11 AVDD power_in Positive supply voltage for the bandgap voltage reference.
12 RSET passive External DAC RSET connection, nominally a 3.92 k resistor to ground for 10 mA output; RSET = 39.93/IOUT.
13 VOUTN output Comparator complementary CMOS logic level output.
14 VOUTP output Comparator true CMOS logic level output.
15 VINN input Comparator inverting input.
16 VINP input Comparator noninverting input.
17 DACBP passive DAC voltage reference bypass connection, normally left NC (no connect) for optimum SFDR performance.
18 AVDD power_in Positive supply voltage for the analog circuitry (DAC and comparator).
19 AGND power_in Analog ground, the ground return for the DAC and comparator analog circuitry.
20 IOUTB output Complementary DAC output with IOUTB = (full-scale output - IOUT); its load should equal that of IOUT for best SFDR performance.
21 IOUT output True balanced DAC output; current is sourcing and requires current-to-voltage conversion, usually a resistor or transformer referenced to GND.
22 RESET input Active-high master reset that clears the DDS accumulator and phase offset register, sets parallel mode and disengages the 6 REFCLK Multiplier, without clearing the 40-bit input register.
23 DVDD power_in Positive supply voltage pin for the digital circuitry.
24 DGND power_in Ground return pin for the digital circuitry.
25 D7 input MSB of the 8-bit parallel data input port; also serves as the input pin for the 40-bit serial data word.
26 D6 input Bit 6 of the 8-bit parallel data input port used to load the 32-bit frequency tuning word and 8-bit phase/control words.
27 D5 input Bit 5 of the 8-bit parallel data input port used to load the 32-bit frequency tuning word and 8-bit phase/control words.
28 D4 input Bit 4 of the 8-bit parallel data input port used to load the 32-bit frequency tuning word and 8-bit phase/control words.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SSOP-28-208mil
Category Data Converters
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (single-supply operation) VS 2.7 5.25 V Single-supply operation 1
Supply voltage tolerance (spec test condition) VS -5 5 % VS = 5 V ±5%, specification test condition 2
Supply voltage absolute maximum VS 6 V 4
Operating temperature (extended industrial) -40 85 °C VS > 3.0 V 1
Operating temperature (commercial) 0 85 °C VS below 3.0 V 1
Operating temperature range (absolute maximum ratings) -40 85 °C 4
Storage temperature TSTG -65 150 °C 4
Maximum junction temperature TJ 150 °C 4
Digital inputs voltage -0.7 V Maximum printed as +VS + 0.7 V 4
Digital output current 30 mA 4
DAC output current 30 mA 4
SSOP thermal impedance JA 82 °C/W SSOP package 4
Full-scale output current 5 10 20 mA 25°C 2
Gain error -10 10 % FS 25°C 2
Voltage compliance range -0.5 1.5 V 25°C 2
Clock output duty cycle -10 50 10 % Full temperature range 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC 1 Amp 552742-1, 36-Pin Plastic, Right Angle, PC Mount, Female J1 20

CAD (KiCad official)

  • Symbol: AD9851BRSZ
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
  • 3D model files: ad9851brsz-etched.step / ad9851brsz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad9851brsz.step / ad9851brsz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (24 pp, sha256 83f089d19aed0c14, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF