component

AD8302ARUZ-REEL

Public Made by Adom

by adom

Analog Devices RF Detectors, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentrf & radioad8302aruz-reelfactory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
main
ad8302aruz-reel / README.md
History Download
Ray Publish 0.1.0 9d87332 5d ago

AD8302ARUZ-REEL

Analog Devices · RF Detectors · TSSOP-14

AD8302ARUZ-REEL from Analog Devices, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 COMM power_in Device common; connect to a low impedance ground.
2 INPA input High input impedance signal input to channel A, which must be ac-coupled.
3 OFSA passive A capacitor to ground at this pin sets the offset compensation filter corner and provides input decoupling.
4 VPOS power_in Voltage supply (VS), 2.7 V to 5.5 V.
5 OFSB passive A capacitor to ground at this pin sets the offset compensation filter corner and provides input decoupling.
6 INPB input Input to channel B, with the same structure as INPA.
7 COMM power_in Device common; connect to a low impedance ground.
8 PFLT passive Low pass filter terminal for the phase output.
9 VPHS output Single-ended output proportional to the phase difference between INPA and INPB.
10 PSET input Feedback pin for scaling of the VPHS output voltage in measurement mode; apply a setpoint voltage for controller mode.
11 VREF power_in Internally generated reference voltage, 1.8 V nominal.
12 MSET input Feedback pin for scaling of the VMAG output voltage in measurement mode; accepts a set point voltage in controller mode.
13 VMAG output Single-ended output voltage proportional to the decibel ratio of signals applied to INPA and INPB.
14 MFLT passive Low pass filter terminal for the magnitude output.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TSSOP-14
Category RF & Radio
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (VPOS) VS 2.7 5 5.5 V 3
Operating Current (Quiescent) 19 25 mA VS = 5 V 3
Operating Current (Quiescent) 21 27 mA -40°C ≤ TA ≤ +85°C 3
Output Voltage (VREF pin) VREF 1.7 1.8 1.9 V Load = 2 kΩ 3
Supply Voltage VS 5.5 V 4
INPA, INPB Maximum Input -3 dBV 4
Equivalent Power Re. 50 Ω 10 dBm Re. 50 Ω 4
Maximum Junction Temperature 125 °C 4
Operating Temperature Range TA -40 85 °C 4
Storage Temperature Range -65 150 °C 4
Lead Temperature Range (Soldering) 300 °C Soldering 60 sec 4
MSET/PSET input impedance tolerance -20 20 % Manufacturing tolerance of 20 kΩ MSET/PSET input impedance 18
Thermal Resistance Junction-to-Ambient θJA 150 °C/W JEDEC 1S standard (2-layer) board data 4
MSET/PSET input impedance 20 kΩ 18
INPA/INPB input impedance 3 kΩ Nominal, low frequencies 1
900 MHz Magnitude Dynamic Range ±1 dB Linearity 58 dB PREF = -30 dBm (VREF = -43 dBV) 3
900 MHz Magnitude Dynamic Range ±0.5 dB Linearity 54 dB PREF = -30 dBm (VREF = -43 dBV) 3
900 MHz Magnitude Dynamic Range ±0.2 dB Linearity 42 dB PREF = -30 dBm (VREF = -43 dBV) 3
900 MHz Magnitude Slope 28.7 mV/dB From Linear Regression 3
900 MHz Magnitude Deviation vs. Temperature 0.25 dB Deviation from Output at 25°C; -40°C ≤ TA ≤ +85°C, PINPA = PINPB = -30 dBm 3
900 MHz Magnitude Deviation from Best Fit Curve 0.25 dB Deviation from Best Fit Curve at 25°C; -40°C ≤ TA ≤ +85°C, PINPA = ±25 dB, PINPB = -30 dBm 3
900 MHz Gain Measurement Balance 0.2 dB PINPA = PINPB = -5 dBm to -50 dBm 3
900 MHz Phase Dynamic Range (deviation from best fit line) 143 Degree Less than ± 1 Degree Deviation from Best Fit Line 3
900 MHz Phase Dynamic Range (instantaneous slope) 143 Degree Less than 10% Deviation in Instantaneous Slope 3
900 MHz Phase Slope (absolute value) 10.1 mV/Degree From Linear Regression about -90° or +90° 3
900 MHz Phase Deviation (Delta Phase = 90°) 0.75 Degree Linear Deviation from Best Fit Curve at 25°C; -40°C ≤ TA ≤ +85°C, Delta Phase = 90 Degrees 3
900 MHz Phase Deviation (Delta Phase = ±30°) 0.75 Degree -40°C ≤ TA ≤ +85°C, Delta Phase = ±30 Degrees 3
900 MHz Phase Measurement Balance 0.8 Degree Phase @ INPA = Phase @ INPB, PIN = -5 dBm to -50 dBm 3
1900 MHz Magnitude Dynamic Range ±1 dB Linearity 57 dB PREF = -30 dBm (VREF = -43 dBV) 3
1900 MHz Magnitude Dynamic Range ±0.5 dB Linearity 54 dB PREF = -30 dBm (VREF = -43 dBV) 3
1900 MHz Magnitude Dynamic Range ±0.2 dB Linearity 42 dB PREF = -30 dBm (VREF = -43 dBV) 3
1900 MHz Magnitude Slope 27.5 mV/dB From Linear Regression 3
1900 MHz Magnitude Deviation vs. Temperature 0.27 dB Deviation from Output at 25°C; -40°C ≤ TA ≤ +85°C, PINPA = PINPB = -30 dBm 3
1900 MHz Magnitude Deviation from Best Fit Curve 0.33 dB Deviation from Best Fit Curve at 25°C; -40°C ≤ TA ≤ +85°C, PINPA = ±25 dB, PINPB = -30 dBm 3
1900 MHz Gain Measurement Balance 0.2 dB PINPA = PINPB = -5 dBm to -50 dBm 3
1900 MHz Phase Dynamic Range (deviation from best fit line) 128 Degree Less than ±1 Degree Deviation from Best Fit Line 3
1900 MHz Phase Dynamic Range (instantaneous slope) 120 Degree Less than 10% Deviation in Instantaneous Slope 3
1900 MHz Phase Slope (absolute value) 10.2 mV/Degree From Linear Regression about -90° or +90° 3
1900 MHz Phase Deviation (Delta Phase = 90°) 0.8 Degree Linear Deviation from Best Fit Curve at 25°C; -40°C ≤ TA ≤ +85°C, Delta Phase = 90 Degrees 3
1900 MHz Phase Deviation (Delta Phase = ±30°) 0.8 Degree -40°C ≤ TA ≤ +85°C, Delta Phase = ±30 Degrees 3
1900 MHz Phase Measurement Balance 1 Degree Phase @ INPA = Phase @ INPB, PIN = -5 dBm to -50 dBm 3
2200 MHz Magnitude Dynamic Range ±1 dB Linearity 53 dB PREF = -30 dBm (VREF = -43 dBV) 3
2200 MHz Magnitude Dynamic Range ±0.5 dB Linearity 51 dB PREF = -30 dBm (VREF = -43 dBV) 3
2200 MHz Magnitude Dynamic Range ±0.2 dB Linearity 38 dB PREF = -30 dBm (VREF = -43 dBV) 3
2200 MHz Magnitude Slope 27.5 mV/dB From Linear Regression 3
2200 MHz Magnitude Deviation vs. Temperature 0.28 dB Deviation from Output at 25°C; -40°C ≤ TA ≤ +85°C, PINPA = PINPB = -30 dBm 3
2200 MHz Magnitude Deviation from Best Fit Curve 0.4 dB Deviation from Best Fit Curve at 25°C; -40°C ≤ TA ≤ +85°C, PINPA = ±25 dB, PINPB = -30 dBm 3
2200 MHz Gain Measurement Balance 0.2 dB PINPA = PINPB = -5 dBm to -50 dBm 3
2200 MHz Phase Dynamic Range (deviation from best fit line) 115 Degree Less than ±1 Degree Deviation from Best Fit Line 3
2200 MHz Phase Dynamic Range (instantaneous slope) 110 Degree Less than 10% Deviation in Instantaneous Slope 3
2200 MHz Phase Slope (absolute value) 10 mV/Degree From Linear Regression about -90° or +90° 3
2200 MHz Phase Deviation (Delta Phase = 90°) 0.85 Degree Linear Deviation from Best Fit Curve at 25°C; -40°C ≤ TA ≤ +85°C, Delta Phase = 90 Degrees 3
2200 MHz Phase Deviation (Delta Phase = ±30°) 0.9 Degree -40°C ≤ TA ≤ +85°C, Delta Phase = ±30 Degrees 3
VREF Power Supply Rejection Ratio PSRR 0.25 mV/V VS = 2.7 V to 5.5 V 3
VREF Output Current Source/Sink 5 mA Less than 1% Change 3

CAD (KiCad official)

  • Symbol: AD8302ARUZ-REEL
  • Footprint: Package_SO:TSSOP-14_4.4x5mm_P0.65mm
  • 3D model: TSSOP-14 (KiCad packages3D, STEP)
  • 3D model files: ad8302aruz-reel-etched.step / ad8302aruz-reel-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad8302aruz-reel.step / ad8302aruz-reel.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (23 pp, sha256 cd52c37aedc30168, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF