component
AD8302ARUZ-REEL
Public Made by Adomby adom
Analog Devices RF Detectors, TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 5d ago |
| viewers | 5d ago |
| ad8302aruz-reel-etched.glb | 5d ago |
| ad8302aruz-reel-etched.step | 5d ago |
| ad8302aruz-reel-hero.glb | 5d ago |
| ad8302aruz-reel-hero.overlay.json | 5d ago |
| ad8302aruz-reel.glb | 5d ago |
| ad8302aruz-reel.kicad_mod | 5d ago |
| ad8302aruz-reel.kicad_sym | 5d ago |
| ad8302aruz-reel.lbr | 5d ago |
| ad8302aruz-reel.step | 5d ago |
| package.json | 5d ago |
| page.json | 5d ago |
| README.md | 5d ago |
AD8302ARUZ-REEL
Analog Devices · RF Detectors · TSSOP-14
AD8302ARUZ-REEL from Analog Devices, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COMM | power_in | Device common; connect to a low impedance ground. |
| 2 | INPA | input | High input impedance signal input to channel A, which must be ac-coupled. |
| 3 | OFSA | passive | A capacitor to ground at this pin sets the offset compensation filter corner and provides input decoupling. |
| 4 | VPOS | power_in | Voltage supply (VS), 2.7 V to 5.5 V. |
| 5 | OFSB | passive | A capacitor to ground at this pin sets the offset compensation filter corner and provides input decoupling. |
| 6 | INPB | input | Input to channel B, with the same structure as INPA. |
| 7 | COMM | power_in | Device common; connect to a low impedance ground. |
| 8 | PFLT | passive | Low pass filter terminal for the phase output. |
| 9 | VPHS | output | Single-ended output proportional to the phase difference between INPA and INPB. |
| 10 | PSET | input | Feedback pin for scaling of the VPHS output voltage in measurement mode; apply a setpoint voltage for controller mode. |
| 11 | VREF | power_in | Internally generated reference voltage, 1.8 V nominal. |
| 12 | MSET | input | Feedback pin for scaling of the VMAG output voltage in measurement mode; accepts a set point voltage in controller mode. |
| 13 | VMAG | output | Single-ended output voltage proportional to the decibel ratio of signals applied to INPA and INPB. |
| 14 | MFLT | passive | Low pass filter terminal for the magnitude output. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSSOP-14 |
| Category | RF & Radio |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VPOS) | VS | 2.7 | 5 | 5.5 | V | 3 | |
| Operating Current (Quiescent) | 19 | 25 | mA | VS = 5 V | 3 | ||
| Operating Current (Quiescent) | 21 | 27 | mA | -40°C ≤ TA ≤ +85°C | 3 | ||
| Output Voltage (VREF pin) | VREF | 1.7 | 1.8 | 1.9 | V | Load = 2 kΩ | 3 |
| Supply Voltage | VS | 5.5 | V | 4 | |||
| INPA, INPB Maximum Input | -3 | dBV | 4 | ||||
| Equivalent Power Re. 50 Ω | 10 | dBm | Re. 50 Ω | 4 | |||
| Maximum Junction Temperature | 125 | °C | 4 | ||||
| Operating Temperature Range | TA | -40 | 85 | °C | 4 | ||
| Storage Temperature Range | -65 | 150 | °C | 4 | |||
| Lead Temperature Range (Soldering) | 300 | °C | Soldering 60 sec | 4 | |||
| MSET/PSET input impedance tolerance | -20 | 20 | % | Manufacturing tolerance of 20 kΩ MSET/PSET input impedance | 18 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 150 | °C/W | JEDEC 1S standard (2-layer) board data | 4 | ||
| MSET/PSET input impedance | 20 | kΩ | 18 | ||||
| INPA/INPB input impedance | 3 | kΩ | Nominal, low frequencies | 1 | |||
| 900 MHz Magnitude Dynamic Range ±1 dB Linearity | 58 | dB | PREF = -30 dBm (VREF = -43 dBV) | 3 | |||
| 900 MHz Magnitude Dynamic Range ±0.5 dB Linearity | 54 | dB | PREF = -30 dBm (VREF = -43 dBV) | 3 | |||
| 900 MHz Magnitude Dynamic Range ±0.2 dB Linearity | 42 | dB | PREF = -30 dBm (VREF = -43 dBV) | 3 | |||
| 900 MHz Magnitude Slope | 28.7 | mV/dB | From Linear Regression | 3 | |||
| 900 MHz Magnitude Deviation vs. Temperature | 0.25 | dB | Deviation from Output at 25°C; -40°C ≤ TA ≤ +85°C, PINPA = PINPB = -30 dBm | 3 | |||
| 900 MHz Magnitude Deviation from Best Fit Curve | 0.25 | dB | Deviation from Best Fit Curve at 25°C; -40°C ≤ TA ≤ +85°C, PINPA = ±25 dB, PINPB = -30 dBm | 3 | |||
| 900 MHz Gain Measurement Balance | 0.2 | dB | PINPA = PINPB = -5 dBm to -50 dBm | 3 | |||
| 900 MHz Phase Dynamic Range (deviation from best fit line) | 143 | Degree | Less than ± 1 Degree Deviation from Best Fit Line | 3 | |||
| 900 MHz Phase Dynamic Range (instantaneous slope) | 143 | Degree | Less than 10% Deviation in Instantaneous Slope | 3 | |||
| 900 MHz Phase Slope (absolute value) | 10.1 | mV/Degree | From Linear Regression about -90° or +90° | 3 | |||
| 900 MHz Phase Deviation (Delta Phase = 90°) | 0.75 | Degree | Linear Deviation from Best Fit Curve at 25°C; -40°C ≤ TA ≤ +85°C, Delta Phase = 90 Degrees | 3 | |||
| 900 MHz Phase Deviation (Delta Phase = ±30°) | 0.75 | Degree | -40°C ≤ TA ≤ +85°C, Delta Phase = ±30 Degrees | 3 | |||
| 900 MHz Phase Measurement Balance | 0.8 | Degree | Phase @ INPA = Phase @ INPB, PIN = -5 dBm to -50 dBm | 3 | |||
| 1900 MHz Magnitude Dynamic Range ±1 dB Linearity | 57 | dB | PREF = -30 dBm (VREF = -43 dBV) | 3 | |||
| 1900 MHz Magnitude Dynamic Range ±0.5 dB Linearity | 54 | dB | PREF = -30 dBm (VREF = -43 dBV) | 3 | |||
| 1900 MHz Magnitude Dynamic Range ±0.2 dB Linearity | 42 | dB | PREF = -30 dBm (VREF = -43 dBV) | 3 | |||
| 1900 MHz Magnitude Slope | 27.5 | mV/dB | From Linear Regression | 3 | |||
| 1900 MHz Magnitude Deviation vs. Temperature | 0.27 | dB | Deviation from Output at 25°C; -40°C ≤ TA ≤ +85°C, PINPA = PINPB = -30 dBm | 3 | |||
| 1900 MHz Magnitude Deviation from Best Fit Curve | 0.33 | dB | Deviation from Best Fit Curve at 25°C; -40°C ≤ TA ≤ +85°C, PINPA = ±25 dB, PINPB = -30 dBm | 3 | |||
| 1900 MHz Gain Measurement Balance | 0.2 | dB | PINPA = PINPB = -5 dBm to -50 dBm | 3 | |||
| 1900 MHz Phase Dynamic Range (deviation from best fit line) | 128 | Degree | Less than ±1 Degree Deviation from Best Fit Line | 3 | |||
| 1900 MHz Phase Dynamic Range (instantaneous slope) | 120 | Degree | Less than 10% Deviation in Instantaneous Slope | 3 | |||
| 1900 MHz Phase Slope (absolute value) | 10.2 | mV/Degree | From Linear Regression about -90° or +90° | 3 | |||
| 1900 MHz Phase Deviation (Delta Phase = 90°) | 0.8 | Degree | Linear Deviation from Best Fit Curve at 25°C; -40°C ≤ TA ≤ +85°C, Delta Phase = 90 Degrees | 3 | |||
| 1900 MHz Phase Deviation (Delta Phase = ±30°) | 0.8 | Degree | -40°C ≤ TA ≤ +85°C, Delta Phase = ±30 Degrees | 3 | |||
| 1900 MHz Phase Measurement Balance | 1 | Degree | Phase @ INPA = Phase @ INPB, PIN = -5 dBm to -50 dBm | 3 | |||
| 2200 MHz Magnitude Dynamic Range ±1 dB Linearity | 53 | dB | PREF = -30 dBm (VREF = -43 dBV) | 3 | |||
| 2200 MHz Magnitude Dynamic Range ±0.5 dB Linearity | 51 | dB | PREF = -30 dBm (VREF = -43 dBV) | 3 | |||
| 2200 MHz Magnitude Dynamic Range ±0.2 dB Linearity | 38 | dB | PREF = -30 dBm (VREF = -43 dBV) | 3 | |||
| 2200 MHz Magnitude Slope | 27.5 | mV/dB | From Linear Regression | 3 | |||
| 2200 MHz Magnitude Deviation vs. Temperature | 0.28 | dB | Deviation from Output at 25°C; -40°C ≤ TA ≤ +85°C, PINPA = PINPB = -30 dBm | 3 | |||
| 2200 MHz Magnitude Deviation from Best Fit Curve | 0.4 | dB | Deviation from Best Fit Curve at 25°C; -40°C ≤ TA ≤ +85°C, PINPA = ±25 dB, PINPB = -30 dBm | 3 | |||
| 2200 MHz Gain Measurement Balance | 0.2 | dB | PINPA = PINPB = -5 dBm to -50 dBm | 3 | |||
| 2200 MHz Phase Dynamic Range (deviation from best fit line) | 115 | Degree | Less than ±1 Degree Deviation from Best Fit Line | 3 | |||
| 2200 MHz Phase Dynamic Range (instantaneous slope) | 110 | Degree | Less than 10% Deviation in Instantaneous Slope | 3 | |||
| 2200 MHz Phase Slope (absolute value) | 10 | mV/Degree | From Linear Regression about -90° or +90° | 3 | |||
| 2200 MHz Phase Deviation (Delta Phase = 90°) | 0.85 | Degree | Linear Deviation from Best Fit Curve at 25°C; -40°C ≤ TA ≤ +85°C, Delta Phase = 90 Degrees | 3 | |||
| 2200 MHz Phase Deviation (Delta Phase = ±30°) | 0.9 | Degree | -40°C ≤ TA ≤ +85°C, Delta Phase = ±30 Degrees | 3 | |||
| VREF Power Supply Rejection Ratio | PSRR | 0.25 | mV/V | VS = 2.7 V to 5.5 V | 3 | ||
| VREF Output Current Source/Sink | 5 | mA | Less than 1% Change | 3 |
CAD (KiCad official)
- Symbol:
AD8302ARUZ-REEL - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
ad8302aruz-reel-etched.step/ad8302aruz-reel-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad8302aruz-reel.step/ad8302aruz-reel.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (23 pp, sha256
cd52c37aedc30168, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).