main
Ray Publish 0.1.0 62a3ffe
{
  "slug": "ad7849brz",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Digital To Analog Converters (DACs), SOIC-20-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "data converters",
    "ad7849brz",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ad7849brz.kicad_sym",
    "ad7849brz.kicad_mod",
    "ad7849brz.glb",
    "ad7849brz.step",
    "ad7849brz.lbr",
    "docs/hero.png",
    "docs/ad7849brz-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ad7849brz-hero.glb",
    "ad7849brz-hero.overlay.json",
    "ad7849brz-etched.glb"
  ],
  "component": {
    "mpn": "AD7849BRZ",
    "manufacturer": "Analog Devices",
    "package": "SOIC-20-300mil",
    "pin_count": 20,
    "category": "Data Converters",
    "subcategory": "Digital To Analog Converters (DACs)",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD7849.pdf",
    "parts": {
      "symbol": "ad7849brz.kicad_sym",
      "footprint": "ad7849brz.kicad_mod",
      "model_3d": "ad7849brz-hero.glb",
      "model_3d_plain": "ad7849brz-etched.glb",
      "model_3d_step": "ad7849brz-etched.step",
      "model_3d_step_plain": "ad7849brz.step",
      "lbr": "ad7849brz.lbr"
    },
    "distributor_links": {
      "lcsc": "C578537",
      "digikey": "AD7849BRZ-ND",
      "mouser": "584-AD7849BRZ"
    },
    "distributor_check": {
      "checked_at": "2026-11-12T07:22:00Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "AD7849BRZ-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-AD7849BRZ",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VREF+",
        "type": "power_in",
        "description": "Reference input; the DAC is specified for VREF+ of 5 V and its range is +5 V to -5 V because it is fully multiplying."
      },
      {
        "number": "2",
        "name": "VREF−",
        "type": "power_in",
        "description": "Reference input specified for VREF− of -5 V, with a fully multiplying range of -5 V to +5 V."
      },
      {
        "number": "3",
        "name": "VSS",
        "type": "power_in",
        "description": "Negative supply for the analog circuitry, nominally -15 V, with VSS to DGND rated -0.4 V to -17 V."
      },
      {
        "number": "4",
        "name": "SYNC",
        "type": "input",
        "description": "Data synchronization logic input; when it goes low, the internal logic is initialized in readiness for a new data word."
      },
      {
        "number": "5",
        "name": "SCLK",
        "type": "input",
        "description": "Serial clock logic input; data is clocked into the input register on each SCLK falling edge."
      },
      {
        "number": "6",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply for the digital circuitry, nominally 5 V, specified over 4.75 V to 5.25 V."
      },
      {
        "number": "7",
        "name": "SDOUT",
        "type": "output",
        "description": "Serial data output, enabled when DCEN is logic 1, clocking the input shift register data out on each SCLK rising edge."
      },
      {
        "number": "8",
        "name": "DCEN",
        "type": "input",
        "description": "Daisy-chain enable logic input; it must be connected high for a daisy-chain interface, otherwise it must be connected low."
      },
      {
        "number": "9",
        "name": "BIN/COMP",
        "type": "input",
        "description": "Data format select input; logic 0 selects natural binary in the unipolar range or offset binary in the bipolar range, and logic 1 selects twos complement in the bipolar range."
      },
      {
        "number": "10",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital ground, the ground reference point for the on-chip digital circuitry."
      },
      {
        "number": "11",
        "name": "LDAC",
        "type": "input",
        "description": "Load DAC logic input; the DAC output updates on its falling edge, or on the 16th falling SCLK edge when this pin is permanently low."
      },
      {
        "number": "12",
        "name": "SDIN",
        "type": "input",
        "description": "Serial data input to which the 16-bit serial data word is applied."
      },
      {
        "number": "13",
        "name": "CLR",
        "type": "input",
        "description": "Clear logic input; taking it low sets VOUT to 0 V in the unipolar and bipolar twos complement ranges, and to VREF- in the offset binary bipolar range."
      },
      {
        "number": "14",
        "name": "RSTIN",
        "type": "input",
        "description": "Reset logic input; applying logic 0 resets the DAC output to 0 V, and it should be tied to logic 1 in normal operation."
      },
      {
        "number": "15",
        "name": "RSTOUT",
        "type": "output",
        "description": "Reset logic output from the on-chip voltage monitor, available to control other system components."
      },
      {
        "number": "16",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground for the device and the point to which the output is shorted in reset mode."
      },
      {
        "number": "17",
        "name": "VDD",
        "type": "power_in",
        "description": "Positive supply for the analog circuitry, nominally 15 V, specified over 14.25 V to 15.75 V."
      },
      {
        "number": "18",
        "name": "NC",
        "type": "unconnected",
        "description": "No connect; leave this pin unconnected."
      },
      {
        "number": "19",
        "name": "VOUT",
        "type": "output",
        "description": "DAC output voltage pin, with output swing specified as VSS + 4 V to VDD − 4 V and a minimum 2 kΩ resistive load to 0 V."
      },
      {
        "number": "20",
        "name": "ROFS",
        "type": "input",
        "description": "Input to the summing resistor of the DAC output amplifier, used to select the output voltage ranges."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet lists AD7849BRZ only as '20-Lead SOIC_W, RW-20' (wide body). The 0.300 in (300 mil) bo; The pin-configuration figure text is garbled in extraction, so the pin numbers were taken from Table; VSS, VDD, VCC, DGND and AGND are typed power_in per the KiCad convention for supply and ground pins."
        ],
        "pages_sent": 7,
        "cost_usd": 0.004,
        "at": "2026-11-12T07:21:53"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD7849.pdf",
        "pages": 20,
        "sha256": "830d5f28d1bf444a",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ad7849brz.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          12.8,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "59a10b341e6972b31d81802a048060326da627d8b92dcf4263064f4f62ec808e",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ad7849brz-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          12.8,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "8b5ad322a379e720a18d35b124311e6dd4daee7af2d4cb9b0f368ddf86c0f3a7",
        "checked": "2026-11-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "RW-20",
      "source_page": 18,
      "D": {
        "nom_mm": 12.8,
        "range_mm": [
          12.6,
          13.0
        ]
      },
      "E1": {
        "nom_mm": 7.5,
        "range_mm": [
          7.4,
          7.6
        ]
      },
      "E": {
        "nom_mm": 10.325,
        "range_mm": [
          10.0,
          10.65
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 2.5,
        "range_mm": [
          2.35,
          2.65
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "ad7849brz.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}