3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAD7849BRZ
Analog Devices · Digital To Analog Converters (DACs) · SOIC-20-300mil
AD7849BRZ from Analog Devices, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VREF+ | power_in | Reference input; the DAC is specified for VREF+ of 5 V and its range is +5 V to -5 V because it is fully multiplying. |
| 2 | VREF− | power_in | Reference input specified for VREF− of -5 V, with a fully multiplying range of -5 V to +5 V. |
| 3 | VSS | power_in | Negative supply for the analog circuitry, nominally -15 V, with VSS to DGND rated -0.4 V to -17 V. |
| 4 | SYNC | input | Data synchronization logic input; when it goes low, the internal logic is initialized in readiness for a new data word. |
| 5 | SCLK | input | Serial clock logic input; data is clocked into the input register on each SCLK falling edge. |
| 6 | VCC | power_in | Positive supply for the digital circuitry, nominally 5 V, specified over 4.75 V to 5.25 V. |
| 7 | SDOUT | output | Serial data output, enabled when DCEN is logic 1, clocking the input shift register data out on each SCLK rising edge. |
| 8 | DCEN | input | Daisy-chain enable logic input; it must be connected high for a daisy-chain interface, otherwise it must be connected low. |
| 9 | BIN/COMP | input | Data format select input; logic 0 selects natural binary in the unipolar range or offset binary in the bipolar range, and logic 1 selects twos complement in the bipolar range. |
| 10 | DGND | power_in | Digital ground, the ground reference point for the on-chip digital circuitry. |
| 11 | LDAC | input | Load DAC logic input; the DAC output updates on its falling edge, or on the 16th falling SCLK edge when this pin is permanently low. |
| 12 | SDIN | input | Serial data input to which the 16-bit serial data word is applied. |
| 13 | CLR | input | Clear logic input; taking it low sets VOUT to 0 V in the unipolar and bipolar twos complement ranges, and to VREF- in the offset binary bipolar range. |
| 14 | RSTIN | input | Reset logic input; applying logic 0 resets the DAC output to 0 V, and it should be tied to logic 1 in normal operation. |
| 15 | RSTOUT | output | Reset logic output from the on-chip voltage monitor, available to control other system components. |
| 16 | AGND | power_in | Analog ground for the device and the point to which the output is shorted in reset mode. |
| 17 | VDD | power_in | Positive supply for the analog circuitry, nominally 15 V, specified over 14.25 V to 15.75 V. |
| 18 | NC | unconnected | No connect; leave this pin unconnected. |
| 19 | VOUT | output | DAC output voltage pin, with output swing specified as VSS + 4 V to VDD − 4 V and a minimum 2 kΩ resistive load to 0 V. |
| 20 | ROFS | input | Input to the summing resistor of the DAC output amplifier, used to select the output voltage ranges. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-20-300mil |
| Category | Data Converters |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Relative Accuracy, unipolar, TMIN to TMAX (B version) | -16 | 16 | LSB | 3 | |||
| Differential Nonlinearity, unipolar (B version) | -0.9 | 0.9 | LSB | All grades guaranteed monotonic over temperature | 3 | ||
| Gain Error, unipolar, TMIN to TMAX (B version) | -16 | 16 | LSB | 3 | |||
| Offset Error, unipolar, TMIN to TMAX (B version) | -24 | 24 | LSB | 3 | |||
| Relative Accuracy, bipolar, TMIN to TMAX (B version) | -8 | 8 | LSB | 3 | |||
| Differential Nonlinearity, bipolar (B version) | -0.9 | 0.9 | LSB | All grades guaranteed monotonic over temperature | 3 | ||
| Gain Error, bipolar, TMIN to TMAX (B version) | -16 | 16 | LSB | 3 | |||
| Offset Error, bipolar, TMIN to TMAX (B version) | -12 | 12 | LSB | 3 | |||
| Bipolar Zero Error, TMIN to TMAX (B version) | -12 | 12 | LSB | 3 | |||
| Input Resistance, VREF+ to VREF- (minimum) | 25 | kΩ | Resistance from VREF+ to VREF− | 3 | |||
| Input Resistance, VREF+ to VREF- (maximum) | 43 | kΩ | Typically 34 kΩ | 3 | |||
| Resistive Load to 0 V | 2 | kΩ | To 0 V | 3 | |||
| Capacitive Load to 0 V | 200 | pF | To 0 V | 3 | |||
| Digital Input High Voltage | VINH | 2.4 | V | 4 | |||
| Digital Input Low Voltage | VINL | 0.8 | V | 4 | |||
| Input Current | IINH | -10 | 10 | μA | 4 | ||
| Input Capacitance | CIN | 10 | pF | 4 | |||
| Digital Output Low Voltage | VOL | 0.4 | V | ISINK = 1.6 mA | 4 | ||
| Digital Output High Voltage | VOH | 4 | V | ISOURCE = 400 μA | 4 | ||
| Floating State Leakage Current | -10 | 10 | μA | 4 | |||
| Floating State Output Capacitance | 10 | pF | 4 | ||||
| Positive Analog Supply Voltage | VDD | 14.25 | 15.75 | V | 4 | ||
| Negative Analog Supply Voltage (as printed) | VSS | -14.25 | -15.75 | V | 4 | ||
| Digital Supply Voltage | VCC | 4.75 | 5.25 | V | 4 | ||
| VDD Supply Current | IDD | 5 | mA | VOUT unloaded, VINH = VDD, 0.1 V, VINL = 0.1 V | 4 | ||
| VSS Supply Current | ISS | 5 | mA | VOUT unloaded, VINH = VDD, 0.1 V, VINL = 0.1 V | 4 | ||
| VCC Supply Current | ICC | 2.5 | mA | VINH = VDD, 0.1 V, VINL = 0.1 V | 4 | ||
| Power Supply Sensitivity | 1.5 | LSB/V | 4 | ||||
| Reset Low Threshold Voltage for VDD, VSS | VA | 1.2 | V | This is the lower VDD/VSS threshold voltage for the reset function. | 4 | ||
| Reset High Threshold Voltage for VDD, VSS | VB | 6.4 | 9.5 | V | Below this, the reset is activated. Typically, 8 V. | 4 | |
| Reset Low Threshold Voltage for VCC | VC | 1 | V | This is the lower VCC threshold voltage for the reset function. | 4 | ||
| Reset High Threshold Voltage for VCC | VD | 2.5 | 4 | V | Below this, the reset is activated. Typically, 3 V. | 4 | |
| SCLK cycle time | t1 | 200 | ns | 5 | |||
| SYNC-to-SCLK setup time | t2 | 50 | ns | 5 | |||
| SYNC-to-SCLK hold time | t3 | 70 | ns | 5 | |||
| Data setup time | t4 | 10 | ns | 5 | |||
| Data hold time | t5 | 40 | ns | 5 | |||
| SCLK falling edge to SDO valid | t6 | 80 | ns | 5 | |||
| LDAC, CLR pulse width | t7 | 80 | ns | 5 | |||
| Digital input rise time | tr | 30 | μs | 5 | |||
| Digital input fall time | tf | 30 | μs | 5 | |||
| VDD to DGND | -0.4 | 17 | V | 6 | |||
| VCC to DGND | -0.4 | 7 | V | Upper limit is VDD + 0.4 V or +7 V, whichever is lower | 6 | ||
| VSS to DGND | -17 | -0.4 | V | 6 | |||
| VOUT to DGND | -10 | 10 | V | Limit is VDD + 0.4 V / VSS − 0.4 V or ±10 V, whichever is lower | 6 | ||
| Digital Input Voltage to DGND | -0.4 | V | Upper limit VCC + 0.4 V | 6 | |||
| Input Current to any Pin Except Supplies | -10 | 10 | mA | 6 | |||
| Operating Temperature Range | -40 | 85 | °C | 6 | |||
| Storage Temperature Range | -65 | 150 | °C | 6 | |||
| Junction Temperature | 150 | °C | 6 | ||||
| Power Dissipation | 875 | mW | 20-Lead SOIC | 6 | |||
| Lead Temperature, Vapor Phase (60 sec) | 215 | °C | 20-Lead SOIC | 6 | |||
| Lead Temperature, Infrared (15 sec) | 220 | °C | 20-Lead SOIC | 6 | |||
| Thermal Impedance, junction to ambient (θJA) | θJA | 74 | °C/W | 20-Lead SOIC | 6 |
CAD (KiCad official)
- Symbol:
AD7849BRZ - Footprint:
Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm - 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
- 3D model files:
ad7849brz-etched.step/ad7849brz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad7849brz.step/ad7849brz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
830d5f28d1bf444a, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).