main
History Download
Ray Publish 0.1.0 62a3ffe

AD7849BRZ

Analog Devices · Digital To Analog Converters (DACs) · SOIC-20-300mil

AD7849BRZ from Analog Devices, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VREF+ power_in Reference input; the DAC is specified for VREF+ of 5 V and its range is +5 V to -5 V because it is fully multiplying.
2 VREF− power_in Reference input specified for VREF− of -5 V, with a fully multiplying range of -5 V to +5 V.
3 VSS power_in Negative supply for the analog circuitry, nominally -15 V, with VSS to DGND rated -0.4 V to -17 V.
4 SYNC input Data synchronization logic input; when it goes low, the internal logic is initialized in readiness for a new data word.
5 SCLK input Serial clock logic input; data is clocked into the input register on each SCLK falling edge.
6 VCC power_in Positive supply for the digital circuitry, nominally 5 V, specified over 4.75 V to 5.25 V.
7 SDOUT output Serial data output, enabled when DCEN is logic 1, clocking the input shift register data out on each SCLK rising edge.
8 DCEN input Daisy-chain enable logic input; it must be connected high for a daisy-chain interface, otherwise it must be connected low.
9 BIN/COMP input Data format select input; logic 0 selects natural binary in the unipolar range or offset binary in the bipolar range, and logic 1 selects twos complement in the bipolar range.
10 DGND power_in Digital ground, the ground reference point for the on-chip digital circuitry.
11 LDAC input Load DAC logic input; the DAC output updates on its falling edge, or on the 16th falling SCLK edge when this pin is permanently low.
12 SDIN input Serial data input to which the 16-bit serial data word is applied.
13 CLR input Clear logic input; taking it low sets VOUT to 0 V in the unipolar and bipolar twos complement ranges, and to VREF- in the offset binary bipolar range.
14 RSTIN input Reset logic input; applying logic 0 resets the DAC output to 0 V, and it should be tied to logic 1 in normal operation.
15 RSTOUT output Reset logic output from the on-chip voltage monitor, available to control other system components.
16 AGND power_in Analog ground for the device and the point to which the output is shorted in reset mode.
17 VDD power_in Positive supply for the analog circuitry, nominally 15 V, specified over 14.25 V to 15.75 V.
18 NC unconnected No connect; leave this pin unconnected.
19 VOUT output DAC output voltage pin, with output swing specified as VSS + 4 V to VDD − 4 V and a minimum 2 kΩ resistive load to 0 V.
20 ROFS input Input to the summing resistor of the DAC output amplifier, used to select the output voltage ranges.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOIC-20-300mil
Category Data Converters
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Relative Accuracy, unipolar, TMIN to TMAX (B version) -16 16 LSB 3
Differential Nonlinearity, unipolar (B version) -0.9 0.9 LSB All grades guaranteed monotonic over temperature 3
Gain Error, unipolar, TMIN to TMAX (B version) -16 16 LSB 3
Offset Error, unipolar, TMIN to TMAX (B version) -24 24 LSB 3
Relative Accuracy, bipolar, TMIN to TMAX (B version) -8 8 LSB 3
Differential Nonlinearity, bipolar (B version) -0.9 0.9 LSB All grades guaranteed monotonic over temperature 3
Gain Error, bipolar, TMIN to TMAX (B version) -16 16 LSB 3
Offset Error, bipolar, TMIN to TMAX (B version) -12 12 LSB 3
Bipolar Zero Error, TMIN to TMAX (B version) -12 12 LSB 3
Input Resistance, VREF+ to VREF- (minimum) 25 kΩ Resistance from VREF+ to VREF− 3
Input Resistance, VREF+ to VREF- (maximum) 43 kΩ Typically 34 kΩ 3
Resistive Load to 0 V 2 kΩ To 0 V 3
Capacitive Load to 0 V 200 pF To 0 V 3
Digital Input High Voltage VINH 2.4 V 4
Digital Input Low Voltage VINL 0.8 V 4
Input Current IINH -10 10 μA 4
Input Capacitance CIN 10 pF 4
Digital Output Low Voltage VOL 0.4 V ISINK = 1.6 mA 4
Digital Output High Voltage VOH 4 V ISOURCE = 400 μA 4
Floating State Leakage Current -10 10 μA 4
Floating State Output Capacitance 10 pF 4
Positive Analog Supply Voltage VDD 14.25 15.75 V 4
Negative Analog Supply Voltage (as printed) VSS -14.25 -15.75 V 4
Digital Supply Voltage VCC 4.75 5.25 V 4
VDD Supply Current IDD 5 mA VOUT unloaded, VINH = VDD, 0.1 V, VINL = 0.1 V 4
VSS Supply Current ISS 5 mA VOUT unloaded, VINH = VDD, 0.1 V, VINL = 0.1 V 4
VCC Supply Current ICC 2.5 mA VINH = VDD, 0.1 V, VINL = 0.1 V 4
Power Supply Sensitivity 1.5 LSB/V 4
Reset Low Threshold Voltage for VDD, VSS VA 1.2 V This is the lower VDD/VSS threshold voltage for the reset function. 4
Reset High Threshold Voltage for VDD, VSS VB 6.4 9.5 V Below this, the reset is activated. Typically, 8 V. 4
Reset Low Threshold Voltage for VCC VC 1 V This is the lower VCC threshold voltage for the reset function. 4
Reset High Threshold Voltage for VCC VD 2.5 4 V Below this, the reset is activated. Typically, 3 V. 4
SCLK cycle time t1 200 ns 5
SYNC-to-SCLK setup time t2 50 ns 5
SYNC-to-SCLK hold time t3 70 ns 5
Data setup time t4 10 ns 5
Data hold time t5 40 ns 5
SCLK falling edge to SDO valid t6 80 ns 5
LDAC, CLR pulse width t7 80 ns 5
Digital input rise time tr 30 μs 5
Digital input fall time tf 30 μs 5
VDD to DGND -0.4 17 V 6
VCC to DGND -0.4 7 V Upper limit is VDD + 0.4 V or +7 V, whichever is lower 6
VSS to DGND -17 -0.4 V 6
VOUT to DGND -10 10 V Limit is VDD + 0.4 V / VSS − 0.4 V or ±10 V, whichever is lower 6
Digital Input Voltage to DGND -0.4 V Upper limit VCC + 0.4 V 6
Input Current to any Pin Except Supplies -10 10 mA 6
Operating Temperature Range -40 85 °C 6
Storage Temperature Range -65 150 °C 6
Junction Temperature 150 °C 6
Power Dissipation 875 mW 20-Lead SOIC 6
Lead Temperature, Vapor Phase (60 sec) 215 °C 20-Lead SOIC 6
Lead Temperature, Infrared (15 sec) 220 °C 20-Lead SOIC 6
Thermal Impedance, junction to ambient (θJA) θJA 74 °C/W 20-Lead SOIC 6

CAD (KiCad official)

  • Symbol: AD7849BRZ
  • Footprint: Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm
  • 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
  • 3D model files: ad7849brz-etched.step / ad7849brz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad7849brz.step / ad7849brz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 830d5f28d1bf444a, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF