main
Ray Publish 0.1.0 4418448
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577
{
  "slug": "ad7761bstz",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Analog To Digital Converters (ADCs), LQFP-64(10x10). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "data converters",
    "ad7761bstz",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ad7761bstz.kicad_sym",
    "ad7761bstz.kicad_mod",
    "ad7761bstz.glb",
    "ad7761bstz.step",
    "ad7761bstz.lbr",
    "docs/hero.png",
    "docs/ad7761bstz-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ad7761bstz-hero.glb",
    "ad7761bstz-hero.overlay.json"
  ],
  "component": {
    "mpn": "AD7761BSTZ",
    "manufacturer": "Analog Devices",
    "package": "LQFP-64(10x10)",
    "pin_count": 64,
    "category": "Data Converters",
    "subcategory": "Analog To Digital Converters (ADCs)",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD7761.pdf",
    "parts": {
      "symbol": "ad7761bstz.kicad_sym",
      "footprint": "ad7761bstz.kicad_mod",
      "model_3d": "ad7761bstz-hero.glb",
      "model_3d_plain": "ad7761bstz.glb",
      "model_3d_step": "ad7761bstz-etched.step",
      "model_3d_step_plain": "ad7761bstz.step",
      "lbr": "ad7761bstz.lbr"
    },
    "distributor_links": {
      "lcsc": "C651516",
      "digikey": "505-AD7761BSTZ-ND",
      "mouser": "584-AD7761BSTZ"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T18:29:53Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-AD7761BSTZ-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-AD7761BSTZ",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "AIN1−",
        "type": "input",
        "description": "Negative analog input to ADC Channel 1."
      },
      {
        "number": "2",
        "name": "AIN1+",
        "type": "input",
        "description": "Positive analog input to ADC Channel 1."
      },
      {
        "number": "3",
        "name": "AVSS1A",
        "type": "power_in",
        "description": "Negative analog supply, nominally 0 V."
      },
      {
        "number": "4",
        "name": "AVDD1A",
        "type": "power_in",
        "description": "Analog supply voltage, 5 V ± 10% with respect to AVSS."
      },
      {
        "number": "5",
        "name": "REF1−",
        "type": "input",
        "description": "Negative reference terminal for Channel 0 to Channel 3, range AVSS to (AVDD1 − 1 V); decouple to AVSS with a high quality capacitor."
      },
      {
        "number": "6",
        "name": "REF1+",
        "type": "input",
        "description": "Positive reference terminal for Channel 0 to Channel 3, range (AVSS + 1 V) to AVDD1; apply 1 V to |AVDD1 − AVSS| differential between REF1+ and REF1−."
      },
      {
        "number": "7",
        "name": "AIN2−",
        "type": "input",
        "description": "Negative analog input to ADC Channel 2."
      },
      {
        "number": "8",
        "name": "AIN2+",
        "type": "input",
        "description": "Positive analog input to ADC Channel 2."
      },
      {
        "number": "9",
        "name": "AIN3−",
        "type": "input",
        "description": "Negative analog input to ADC Channel 3."
      },
      {
        "number": "10",
        "name": "AIN3+",
        "type": "input",
        "description": "Positive analog input to ADC Channel 3."
      },
      {
        "number": "11",
        "name": "FILTER/GPIO4",
        "type": "bidirectional",
        "description": "In pin control mode selects filter type (1 = sinc5, 0 = wideband low ripple); in SPI control mode it is GPIO4 and must be set to 1 when a crystal clock is used and the pin is not a GPIO."
      },
      {
        "number": "12",
        "name": "MODE0/GPIO0",
        "type": "bidirectional",
        "description": "In pin control mode sets the mode of operation for all channels (power, DCLK frequency, conversion type); in SPI control mode it is GPIO0."
      },
      {
        "number": "13",
        "name": "MODE1/GPIO1",
        "type": "bidirectional",
        "description": "In pin control mode sets the mode of operation for all channels; in SPI control mode it is GPIO1."
      },
      {
        "number": "14",
        "name": "MODE2/GPIO2",
        "type": "bidirectional",
        "description": "In pin control mode sets the mode of operation for all channels; in SPI control mode it is GPIO2."
      },
      {
        "number": "15",
        "name": "MODE3/GPIO3",
        "type": "bidirectional",
        "description": "In pin control mode sets the mode of operation for all channels; in SPI control mode it is GPIO3."
      },
      {
        "number": "16",
        "name": "ST0/CS",
        "type": "input",
        "description": "In pin control mode a Logic 1 places Channel 0 to Channel 3 in standby; in SPI control mode it is the active low chip select."
      },
      {
        "number": "17",
        "name": "ST1/SCLK",
        "type": "input",
        "description": "In pin control mode a Logic 1 places Channel 4 to Channel 7 in standby (Channel 4 must be enabled when using an external crystal); in SPI control mode it is the serial clock input."
      },
      {
        "number": "18",
        "name": "DEC1/SDI",
        "type": "input",
        "description": "In pin control mode, with DEC0, sets the decimation rate for all channels; in SPI control mode it is the serial data input."
      },
      {
        "number": "19",
        "name": "DEC0/SDO",
        "type": "bidirectional",
        "description": "In pin control mode, with DEC1, sets the decimation rate for all channels; in SPI control mode it is the serial data output for register readback."
      },
      {
        "number": "20",
        "name": "DOUT7",
        "type": "bidirectional",
        "description": "Conversion data output 7, synchronous to DCLK and framed by DRDY; acts as a daisy-chain data input when FORMATx = 01, and needs a pull-down to ground when FORMATx is 10 or 11."
      },
      {
        "number": "21",
        "name": "DOUT6",
        "type": "bidirectional",
        "description": "Conversion data output 6, synchronous to DCLK and framed by DRDY; acts as a digital input from another AD7761 in a daisy chain."
      },
      {
        "number": "22",
        "name": "DOUT5",
        "type": "output",
        "description": "Conversion data output 5, synchronous to DCLK and framed by DRDY."
      },
      {
        "number": "23",
        "name": "DOUT4",
        "type": "output",
        "description": "Conversion data output 4, synchronous to DCLK and framed by DRDY."
      },
      {
        "number": "24",
        "name": "DOUT3",
        "type": "output",
        "description": "Conversion data output 3, synchronous to DCLK and framed by DRDY."
      },
      {
        "number": "25",
        "name": "DOUT2",
        "type": "output",
        "description": "Conversion data output 2, synchronous to DCLK and framed by DRDY."
      },
      {
        "number": "26",
        "name": "DOUT1",
        "type": "output",
        "description": "Conversion data output 1, synchronous to DCLK and framed by DRDY."
      },
      {
        "number": "27",
        "name": "DOUT0",
        "type": "output",
        "description": "Conversion data output 0, synchronous to DCLK and framed by DRDY."
      },
      {
        "number": "28",
        "name": "DCLK",
        "type": "output",
        "description": "ADC conversion data clock, derived from MCLK, synchronous with DRDY and DOUT0 to DOUT7; unrelated to the control SPI."
      },
      {
        "number": "29",
        "name": "DRDY",
        "type": "output",
        "description": "Data ready; periodic signal framing the conversion results from the eight ADCs, synchronous to DCLK and DOUT0 to DOUT7."
      },
      {
        "number": "30",
        "name": "RESET",
        "type": "input",
        "description": "Hardware asynchronous reset input; a hard or soft reset is recommended after the device is fully powered up."
      },
      {
        "number": "31",
        "name": "XTAL1",
        "type": "input",
        "description": "Input 1 for crystal or LVDS clock; connect to DGND when CLK_SEL is 0."
      },
      {
        "number": "32",
        "name": "XTAL2/MCLK",
        "type": "input",
        "description": "Input 2 for crystal or LVDS clock, or CMOS MCLK input with logic level IOVDD/DGND; set FILTER to Logic 1 for a crystal clock source."
      },
      {
        "number": "33",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital ground, nominally 0 V."
      },
      {
        "number": "34",
        "name": "DREGCAP",
        "type": "power_out",
        "description": "Digital LDO output; decouple to DGND with a 10 µF low-ESR capacitor (ESR 50 mΩ to 400 mΩ), not for external circuits, and connect to IOVDD for 1.8 V IOVDD operation."
      },
      {
        "number": "35",
        "name": "IOVDD",
        "type": "power_in",
        "description": "Digital supply setting logic levels for all interface pins; powers the digital core via the LDO when at least 2.25 V, and is tied to DREGCAP for 1.8 V operation."
      },
      {
        "number": "36",
        "name": "SYNC_IN",
        "type": "input",
        "description": "Synchronization input receiving the synchronous signal from SYNC_OUT, used to synchronize AD7761 devices for simultaneous sampling or daisy chain; must be synchronous to the MCLK domain."
      },
      {
        "number": "37",
        "name": "START",
        "type": "input",
        "description": "Start signal that synchronizes the AD7761 to other devices and may be asynchronous; tie to Logic 1 through a pull-up resistor if unused."
      },
      {
        "number": "38",
        "name": "SYNC_OUT",
        "type": "output",
        "description": "Synchronization output, synchronous to MCLK, operating only when START is used; must be wired to SYNC_IN of this and other synchronized AD7761 devices."
      },
      {
        "number": "39",
        "name": "AIN7+",
        "type": "input",
        "description": "Positive analog input to ADC Channel 7."
      },
      {
        "number": "40",
        "name": "AIN7−",
        "type": "input",
        "description": "Negative analog input to ADC Channel 7."
      },
      {
        "number": "41",
        "name": "AIN6+",
        "type": "input",
        "description": "Positive analog input to ADC Channel 6."
      },
      {
        "number": "42",
        "name": "AIN6−",
        "type": "input",
        "description": "Negative analog input to ADC Channel 6."
      },
      {
        "number": "43",
        "name": "REF2+",
        "type": "input",
        "description": "Positive reference terminal for Channel 4 to Channel 7, range (AVSS + 1 V) to AVDD1; apply 1 V to |AVDD1 − AVSS| differential between REF2+ and REF2−."
      },
      {
        "number": "44",
        "name": "REF2−",
        "type": "input",
        "description": "Negative reference terminal for Channel 4 to Channel 7, range AVSS to (AVDD1 − 1 V); decouple to AVSS with a high quality capacitor."
      },
      {
        "number": "45",
        "name": "AVDD1B",
        "type": "power_in",
        "description": "Analog supply voltage, 5 V ± 10% with respect to AVSS."
      },
      {
        "number": "46",
        "name": "AVSS1B",
        "type": "power_in",
        "description": "Negative analog supply, nominally 0 V."
      },
      {
        "number": "47",
        "name": "AIN5+",
        "type": "input",
        "description": "Positive analog input to ADC Channel 5."
      },
      {
        "number": "48",
        "name": "AIN5−",
        "type": "input",
        "description": "Negative analog input to ADC Channel 5."
      },
      {
        "number": "49",
        "name": "AIN4+",
        "type": "input",
        "description": "Positive analog input to ADC Channel 4."
      },
      {
        "number": "50",
        "name": "AIN4−",
        "type": "input",
        "description": "Negative analog input to ADC Channel 4."
      },
      {
        "number": "51",
        "name": "AVSS2B",
        "type": "power_in",
        "description": "Negative analog supply, nominally 0 V."
      },
      {
        "number": "52",
        "name": "REGCAPB",
        "type": "power_out",
        "description": "Analog LDO regulator output; decouple to AVSS with a 1 µF capacitor."
      },
      {
        "number": "53",
        "name": "AVDD2B",
        "type": "power_in",
        "description": "Analog supply voltage, 2 V to 5.5 V with respect to AVSS."
      },
      {
        "number": "54",
        "name": "AVSS",
        "type": "power_in",
        "description": "Negative analog supply, nominally 0 V."
      },
      {
        "number": "55",
        "name": "FORMAT1",
        "type": "input",
        "description": "Format selection pin; hardwire it to set the number of DOUTx pins used for conversion data, checked at power-up."
      },
      {
        "number": "56",
        "name": "FORMAT0",
        "type": "input",
        "description": "Format selection pin; hardwire it to set the number of DOUTx pins used for conversion data, checked at power-up."
      },
      {
        "number": "57",
        "name": "PIN/SPI",
        "type": "input",
        "description": "Control method select: Logic 0 = pin control mode, Logic 1 = SPI control mode."
      },
      {
        "number": "58",
        "name": "CLK_SEL",
        "type": "input",
        "description": "Clock select: 0 = CMOS clock on Pin 32 (Pin 31 to DGND), 1 = crystal or LVDS clock on Pins 31 and 32 (LVDS only in SPI control mode)."
      },
      {
        "number": "59",
        "name": "VCM",
        "type": "output",
        "description": "Common-mode voltage output of (AVDD1 − AVSS)/2, 2.5 V by default in pin control mode, configurable to 2.5 V, 2.14 V or 1.65 V in SPI mode; use a 50 Ω series resistor with capacitive loads above 0.1 µF."
      },
      {
        "number": "60",
        "name": "AVDD2A",
        "type": "power_in",
        "description": "Analog supply voltage, 2 V to 5.5 V with respect to AVSS."
      },
      {
        "number": "61",
        "name": "REGCAPA",
        "type": "power_out",
        "description": "Analog LDO regulator output; decouple to AVSS with a 1 µF capacitor."
      },
      {
        "number": "62",
        "name": "AVSS2A",
        "type": "power_in",
        "description": "Negative analog supply, nominally 0 V."
      },
      {
        "number": "63",
        "name": "AIN0−",
        "type": "input",
        "description": "Negative analog input to ADC Channel 0."
      },
      {
        "number": "64",
        "name": "AIN0+",
        "type": "input",
        "description": "Positive analog input to ADC Channel 0."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Datasheet mentions MODE4 in the PIN/SPI description, but no MODE4 pin exists in the pin table; ignor; Types for LDO outputs (DREGCAP, REGCAPA, REGCAPB) mapped from 'AO' to power_out; VCM mapped to outpu"
        ],
        "pages_sent": 14,
        "cost_usd": 0.5491,
        "at": "2026-11-13T18:29:36"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD7761.pdf",
        "pages": 75,
        "sha256": "114525c88afd23f8",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 64,
        "described": 64,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ad7761bstz.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          12.0,
          12.0,
          1.5
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b0c827bc5c05552175d28affe44a5bd2ab45c9c36efff6ff07a74cc449b13db4",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ad7761bstz-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          12.0,
          12.0,
          1.5
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "262ae5e14b86955698e7ecaa91f48542019af0ffa826e6e54c536a987f53f9f9",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "ST-64-2",
      "source_page": 75,
      "D": {
        "nom_mm": 10.0,
        "range_mm": [
          9.8,
          10.2
        ]
      },
      "E1": {
        "nom_mm": 10.0,
        "range_mm": [
          9.8,
          10.2
        ]
      },
      "E": {
        "nom_mm": 12.0,
        "range_mm": [
          11.8,
          12.2
        ]
      },
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.6,
        "range_mm": [
          null,
          1.6
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "ad7761bstz.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}