main
History Download
Ray Publish 0.1.0 0cbb0ee

AD7492ARUZ

Analog Devices · Analog To Digital Converters (ADCs) · TSSOP-24

AD7492ARUZ from Analog Devices, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DB11 tri_state Data bit 11 (MSB), three-state parallel output controlled by CS and RD, with output high level set by VDRIVE.
2 DB10 tri_state Data bit 10, three-state parallel output controlled by CS and RD, with output high level set by VDRIVE.
3 DB9 tri_state Data bit 9, three-state parallel output controlled by CS and RD, with output high level set by VDRIVE.
4 AVDD power_in Analog supply voltage, 2.7 V to 5.25 V, for all analog circuitry; must be within 0.3 V of DVDD and decoupled to AGND.
5 REF OUT power_out Reference output, 2.5 V ± 1%.
6 VIN power_in Single-ended analog input with 0 V to REFIN range and high dc input impedance.
7 AGND power_in Analog ground reference for all analog circuitry; must be within 0.3 V of DGND.
8 CS input Active-low chip select used with RD to read the conversion result; interchangeable with RD and can be hardwired low.
9 RD input Read input used with CS to place the conversion result on the data bus on the falling edge of both; can be hardwired low.
10 CONVST input Conversion start input; falling edge starts conversion (pulse can be as narrow as 10 ns), and if held low through end of conversion the part enters sleep mode.
11 PS/FS input Partial/full sleep select hardwired to DVDD or GND; partial sleep draws 250 µA max, full sleep draws negligible current.
12 BUSY output Conversion status output that goes high after falling edge of CONVST and returns low when conversion is complete.
13 DB8 tri_state Data bit 8, three-state parallel output controlled by CS and RD, with output high level set by VDRIVE.
14 DB7 tri_state Data bit 7, three-state parallel output controlled by CS and RD, with output high level set by VDRIVE.
15 DB6 tri_state Data bit 6, three-state parallel output controlled by CS and RD, with output high level set by VDRIVE.
16 DB5 tri_state Data bit 5, three-state parallel output controlled by CS and RD, with output high level set by VDRIVE.
17 DB4 tri_state Data bit 4, three-state parallel output controlled by CS and RD, with output high level set by VDRIVE.
18 DB3 tri_state Data bit 3, three-state parallel output controlled by CS and RD, with output high level set by VDRIVE.
19 DGND power_in Digital ground reference for all digital circuitry; must be within 0.3 V of AGND.
20 DVDD power_in Digital supply voltage, 2.7 V to 5.25 V, for digital circuitry apart from output drivers and input circuitry; must be within 0.3 V of AVDD and decoupled to DGND.
21 VDRIVE power_in Supply for output drivers and digital inputs, 2.7 V to 5.25 V, setting output high voltage and input trigger levels.
22 DB2 tri_state Data bit 2, three-state parallel output controlled by CS and RD, with output high level set by VDRIVE.
23 DB1 tri_state Data bit 1, three-state parallel output controlled by CS and RD, with output high level set by VDRIVE.
24 DB0 tri_state Data bit 0 (LSB), three-state parallel output controlled by CS and RD, with output high level set by VDRIVE.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TSSOP-24
Category Data Converters
Pins 24

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Integral Nonlinearity INL -1.5 1.5 LSB 5
Integral Nonlinearity INL -1 1 LSB VDD = 3 V 5
Differential Nonlinearity DNL -0.9 1.5 LSB Guaranteed no missed codes to 12 bits 5
Offset Error -9 9 LSB 5
Gain Error -2.5 2.5 LSB 5
DC Leakage Current -1 1 μA 5
Input Voltage Ranges VIN 0 2.5 V 5
REF OUT Output Voltage Range tolerance REF OUT -1.5 1.5 % for specified performance; nominal 2.5 V 5
Input Capacitance 33 pF 5
Input Current IIN -1 1 μA Typically 10 nA, VIN = 0 V or VDD 5
Input Capacitance CIN 10 pF 5
Output Low Voltage VOL 0.4 V ISINK = 200 μA 5
Floating-State Leakage Current -10 10 μA 5
Floating-State Output Capacitance 10 pF 5
Conversion Time 880 ns 5
Track/Hold Acquisition Time 120 ns 5
Throughput Rate 1 MSPS Conversion time + acquisition time for AD7492 5
VDD VDD 2.7 5.25 V 5
Normal Mode IDD IDD 2.2 3 mA Digital I/Ps = 0 V or DVDD; fS = 1 MSPS 5
Quiescent Current 1.8 mA 5
Partial Sleep Mode 190 250 μA Static, typ 190 μA 5
Full Sleep Mode 1 μA Static, typ 200 nA 5
Power Dissipation Normal Mode 15 mW VDD = 5 V 5
Power Dissipation Partial Sleep Mode 1.25 mW VDD = 5 V 5
Power Dissipation Full Sleep Mode 5 μW VDD = 5 V 5
tCONVERT tCONVERT 880 ns AD7492/AD7492-4 column 6
Partial Sleep Wake-Up Time tWAKEUP 20 μs Partial sleep 6
Full Sleep Wake-Up Time tWAKEUP 500 μs Full sleep 6
CONVST Pulse Width t1 10 ns 6
CONVST to BUSY Delay t2 10 ns VDD = 5 V 6
CONVST to BUSY Delay t2 40 ns VDD = 3 V 6
BUSY to CS Setup Time t3 0 ns 6
CS to RD Setup Time t4 0 ns 6
RD Pulse Width t5 20 ns 6
Data Access Time after Falling Edge of RD t6 15 ns 6
Bus Relinquish Time after Rising Edge of RD t7 8 ns AD7492/AD7492-4 column 6
CS to RD Hold Time t8 0 ns 6
Acquisition Time t9 120 ns 6
Quiet Time t10 100 ns 6
AVDD to AGND/DGND AVDD -0.3 7 V 7
DVDD to AGND/DGND DVDD -0.3 7 V 7
VDRIVE to AGND/DGND VDRIVE -0.3 7 V 7
AVDD to DVDD -0.3 0.3 V 7
AGND to DGND -0.3 0.3 V 7
Input Current to Any Pin Except Supplies -10 10 mA 7
Operating Temperature Range (Commercial A and B Versions) TA -40 85 °C 7
Storage Temperature Range -65 150 °C 7
Junction Temperature 150 °C 7
SOIC, TSSOP Package Dissipation 450 mW 7
θJA Thermal Impedance (TSSOP) θJA 115 °C/W TSSOP 7
θJC Thermal Impedance (TSSOP) θJC 35 °C/W TSSOP 7

CAD (KiCad official)

  • Symbol: AD7492ARUZ
  • Footprint: Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm
  • 3D model: TSSOP-24 (KiCad packages3D, STEP)
  • 3D model files: ad7492aruz-etched.step / ad7492aruz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad7492aruz.step / ad7492aruz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (24 pp, sha256 4b48e374ef7236eb, retrieved 2026-11-09, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF