Generated by kicad-footprint-generator · KiCad file format 20260206
AD7492ARUZ
Analog Devices · Analog To Digital Converters (ADCs) · TSSOP-24
AD7492ARUZ from Analog Devices, in a TSSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DB11 | tri_state | Data bit 11 (MSB), three-state parallel output controlled by CS and RD, with output high level set by VDRIVE. |
| 2 | DB10 | tri_state | Data bit 10, three-state parallel output controlled by CS and RD, with output high level set by VDRIVE. |
| 3 | DB9 | tri_state | Data bit 9, three-state parallel output controlled by CS and RD, with output high level set by VDRIVE. |
| 4 | AVDD | power_in | Analog supply voltage, 2.7 V to 5.25 V, for all analog circuitry; must be within 0.3 V of DVDD and decoupled to AGND. |
| 5 | REF OUT | power_out | Reference output, 2.5 V ± 1%. |
| 6 | VIN | power_in | Single-ended analog input with 0 V to REFIN range and high dc input impedance. |
| 7 | AGND | power_in | Analog ground reference for all analog circuitry; must be within 0.3 V of DGND. |
| 8 | CS | input | Active-low chip select used with RD to read the conversion result; interchangeable with RD and can be hardwired low. |
| 9 | RD | input | Read input used with CS to place the conversion result on the data bus on the falling edge of both; can be hardwired low. |
| 10 | CONVST | input | Conversion start input; falling edge starts conversion (pulse can be as narrow as 10 ns), and if held low through end of conversion the part enters sleep mode. |
| 11 | PS/FS | input | Partial/full sleep select hardwired to DVDD or GND; partial sleep draws 250 µA max, full sleep draws negligible current. |
| 12 | BUSY | output | Conversion status output that goes high after falling edge of CONVST and returns low when conversion is complete. |
| 13 | DB8 | tri_state | Data bit 8, three-state parallel output controlled by CS and RD, with output high level set by VDRIVE. |
| 14 | DB7 | tri_state | Data bit 7, three-state parallel output controlled by CS and RD, with output high level set by VDRIVE. |
| 15 | DB6 | tri_state | Data bit 6, three-state parallel output controlled by CS and RD, with output high level set by VDRIVE. |
| 16 | DB5 | tri_state | Data bit 5, three-state parallel output controlled by CS and RD, with output high level set by VDRIVE. |
| 17 | DB4 | tri_state | Data bit 4, three-state parallel output controlled by CS and RD, with output high level set by VDRIVE. |
| 18 | DB3 | tri_state | Data bit 3, three-state parallel output controlled by CS and RD, with output high level set by VDRIVE. |
| 19 | DGND | power_in | Digital ground reference for all digital circuitry; must be within 0.3 V of AGND. |
| 20 | DVDD | power_in | Digital supply voltage, 2.7 V to 5.25 V, for digital circuitry apart from output drivers and input circuitry; must be within 0.3 V of AVDD and decoupled to DGND. |
| 21 | VDRIVE | power_in | Supply for output drivers and digital inputs, 2.7 V to 5.25 V, setting output high voltage and input trigger levels. |
| 22 | DB2 | tri_state | Data bit 2, three-state parallel output controlled by CS and RD, with output high level set by VDRIVE. |
| 23 | DB1 | tri_state | Data bit 1, three-state parallel output controlled by CS and RD, with output high level set by VDRIVE. |
| 24 | DB0 | tri_state | Data bit 0 (LSB), three-state parallel output controlled by CS and RD, with output high level set by VDRIVE. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSSOP-24 |
| Category | Data Converters |
| Pins | 24 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Integral Nonlinearity | INL | -1.5 | 1.5 | LSB | 5 | ||
| Integral Nonlinearity | INL | -1 | 1 | LSB | VDD = 3 V | 5 | |
| Differential Nonlinearity | DNL | -0.9 | 1.5 | LSB | Guaranteed no missed codes to 12 bits | 5 | |
| Offset Error | -9 | 9 | LSB | 5 | |||
| Gain Error | -2.5 | 2.5 | LSB | 5 | |||
| DC Leakage Current | -1 | 1 | μA | 5 | |||
| Input Voltage Ranges | VIN | 0 | 2.5 | V | 5 | ||
| REF OUT Output Voltage Range tolerance | REF OUT | -1.5 | 1.5 | % | for specified performance; nominal 2.5 V | 5 | |
| Input Capacitance | 33 | pF | 5 | ||||
| Input Current | IIN | -1 | 1 | μA | Typically 10 nA, VIN = 0 V or VDD | 5 | |
| Input Capacitance | CIN | 10 | pF | 5 | |||
| Output Low Voltage | VOL | 0.4 | V | ISINK = 200 μA | 5 | ||
| Floating-State Leakage Current | -10 | 10 | μA | 5 | |||
| Floating-State Output Capacitance | 10 | pF | 5 | ||||
| Conversion Time | 880 | ns | 5 | ||||
| Track/Hold Acquisition Time | 120 | ns | 5 | ||||
| Throughput Rate | 1 | MSPS | Conversion time + acquisition time for AD7492 | 5 | |||
| VDD | VDD | 2.7 | 5.25 | V | 5 | ||
| Normal Mode IDD | IDD | 2.2 | 3 | mA | Digital I/Ps = 0 V or DVDD; fS = 1 MSPS | 5 | |
| Quiescent Current | 1.8 | mA | 5 | ||||
| Partial Sleep Mode | 190 | 250 | μA | Static, typ 190 μA | 5 | ||
| Full Sleep Mode | 1 | μA | Static, typ 200 nA | 5 | |||
| Power Dissipation Normal Mode | 15 | mW | VDD = 5 V | 5 | |||
| Power Dissipation Partial Sleep Mode | 1.25 | mW | VDD = 5 V | 5 | |||
| Power Dissipation Full Sleep Mode | 5 | μW | VDD = 5 V | 5 | |||
| tCONVERT | tCONVERT | 880 | ns | AD7492/AD7492-4 column | 6 | ||
| Partial Sleep Wake-Up Time | tWAKEUP | 20 | μs | Partial sleep | 6 | ||
| Full Sleep Wake-Up Time | tWAKEUP | 500 | μs | Full sleep | 6 | ||
| CONVST Pulse Width | t1 | 10 | ns | 6 | |||
| CONVST to BUSY Delay | t2 | 10 | ns | VDD = 5 V | 6 | ||
| CONVST to BUSY Delay | t2 | 40 | ns | VDD = 3 V | 6 | ||
| BUSY to CS Setup Time | t3 | 0 | ns | 6 | |||
| CS to RD Setup Time | t4 | 0 | ns | 6 | |||
| RD Pulse Width | t5 | 20 | ns | 6 | |||
| Data Access Time after Falling Edge of RD | t6 | 15 | ns | 6 | |||
| Bus Relinquish Time after Rising Edge of RD | t7 | 8 | ns | AD7492/AD7492-4 column | 6 | ||
| CS to RD Hold Time | t8 | 0 | ns | 6 | |||
| Acquisition Time | t9 | 120 | ns | 6 | |||
| Quiet Time | t10 | 100 | ns | 6 | |||
| AVDD to AGND/DGND | AVDD | -0.3 | 7 | V | 7 | ||
| DVDD to AGND/DGND | DVDD | -0.3 | 7 | V | 7 | ||
| VDRIVE to AGND/DGND | VDRIVE | -0.3 | 7 | V | 7 | ||
| AVDD to DVDD | -0.3 | 0.3 | V | 7 | |||
| AGND to DGND | -0.3 | 0.3 | V | 7 | |||
| Input Current to Any Pin Except Supplies | -10 | 10 | mA | 7 | |||
| Operating Temperature Range (Commercial A and B Versions) | TA | -40 | 85 | °C | 7 | ||
| Storage Temperature Range | -65 | 150 | °C | 7 | |||
| Junction Temperature | 150 | °C | 7 | ||||
| SOIC, TSSOP Package Dissipation | 450 | mW | 7 | ||||
| θJA Thermal Impedance (TSSOP) | θJA | 115 | °C/W | TSSOP | 7 | ||
| θJC Thermal Impedance (TSSOP) | θJC | 35 | °C/W | TSSOP | 7 |
CAD (KiCad official)
- Symbol:
AD7492ARUZ - Footprint:
Package_SO:TSSOP-24_4.4x7.8mm_P0.65mm - 3D model: TSSOP-24 (KiCad packages3D, STEP)
- 3D model files:
ad7492aruz-etched.step/ad7492aruz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad7492aruz.step/ad7492aruz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
4b48e374ef7236eb, retrieved 2026-11-09, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).