main
Ray
Publish 0.1.0
1f5f2d9
AD7175-8BCPZ-RL7
Analog Devices · Analog To Digital Converters (ADCs) · LFCSP-40(6x6)
AD7175-8BCPZ-RL7 from Analog Devices, in a LFCSP-40(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AIN16 | input | Analog input 16, selectable through the crosspoint multiplexer; analog input voltage to AVSS is rated −0.3 V to AVDD1 + 0.3 V. |
| 2 | AIN0/REF2− | input | Analog Input 0 and negative terminal of external Reference 2 (REF2−), which can span from AVSS to AVDD1 − 1 V. |
| 3 | AIN1/REF2+ | input | Analog Input 1 and positive terminal of external Reference 2 (REF2+), which spans from AVDD1 to AVSS + 1 V. |
| 4 | AIN2 | input | Analog input 2, selectable through the crosspoint multiplexer; analog input voltage to AVSS is rated −0.3 V to AVDD1 + 0.3 V. |
| 5 | AIN3 | input | Analog input 3, selectable through the crosspoint multiplexer; analog input voltage to AVSS is rated −0.3 V to AVDD1 + 0.3 V. |
| 6 | REFOUT | output | Buffered output of the internal 2.5 V reference, referenced to AVSS, decoupled with a 100 nF capacitor to AVSS. |
| 7 | REGCAPA | power_out | Analog LDO regulator output, to be decoupled to AVSS with a 1 µF capacitor. |
| 8 | AVSS | power_in | Negative analog supply, ranging from 0 V to −2.75 V and nominally set to 0 V. |
| 9 | AVDD1 | power_in | Analog supply voltage 1, 5 V ±10% with respect to AVSS, either a single 5 V supply or a ±2.5 V split supply. |
| 10 | AVDD2 | power_in | Analog supply voltage 2, ranging from 2 V to AVDD1 with respect to AVSS. |
| 11 | PDSW | output | Power-down switch connected to AVSS, controlled by the PDSW bit in the GPIOCON register, able to sink 16 mA maximum. |
| 12 | XTAL1 | input | Input 1 for an external crystal, with a crystal frequency range of 14 MHz to 16.384 MHz. |
| 13 | XTAL2/CLKIO | bidirectional | Input 2 for crystal (XTAL2), or external clock input or internal clock output (CLKIO) at the logic level set by IOVDD; external clock range is 16 MHz to 16.384 MHz. |
| 14 | DOUT/RDY | tri_state | Serial data output, tristated when CS is high, and data-ready output that goes low to indicate conversion completion when CS is low. |
| 15 | DIN | input | Serial data input to the input shift register, clocked in on the rising edge of SCLK. |
| 16 | SCLK | input | Serial clock input for data transfers to and from the ADC, with a Schmitt-triggered input. |
| 17 | CS | input | Active-low chip select input; it can be hardwired low for 3-wire operation, and DOUT/RDY is tristated when CS is high. |
| 18 | ERROR | bidirectional | Error input/output or general-purpose output referenced between IOVDD and DGND, configurable as an active-low error input, an active-low open-drain error output, or a general-purpose output. |
| 19 | SYNC | input | Synchronization input that allows synchronization of the digital filters and analog modulators when using multiple devices. |
| 20 | IOVDD | power_in | Digital I/O supply, 2 V to 5 V nominal and independent of AVDD1 and AVDD2; if AVSS is set to −2.5 V, IOVDD must not exceed 3.6 V. |
| 21 | DGND | power_in | Digital ground. |
| 22 | REGCAPD | power_out | Digital LDO regulator output for decoupling only, to be decoupled to DGND with a 1 µF capacitor. |
| 23 | GPIO0 | bidirectional | General-purpose input/output 0, referred to the AVDD1 and AVSS supplies, so outputs have a 5 V amplitude. |
| 24 | GPIO1 | bidirectional | General-purpose input/output 1, referred to the AVDD1 and AVSS supplies, so outputs have a 5 V amplitude. |
| 25 | GPO2 | output | General-purpose output 2, referred to the AVDD1 and AVSS supplies. |
| 26 | AIN4 | input | Analog input 4, selectable through the crosspoint multiplexer. |
| 27 | AIN5 | input | Analog input 5, selectable through the crosspoint multiplexer. |
| 28 | AIN6 | input | Analog input 6, selectable through the crosspoint multiplexer. |
| 29 | AIN7 | input | Analog input 7, selectable through the crosspoint multiplexer. |
| 30 | AIN8 | input | Analog input 8, selectable through the crosspoint multiplexer. |
| 31 | AIN9 | input | Analog input 9, selectable through the crosspoint multiplexer. |
| 32 | AIN10 | input | Analog input 10, selectable through the crosspoint multiplexer. |
| 33 | AIN11 | input | Analog input 11, selectable through the crosspoint multiplexer. |
| 34 | AIN12 | input | Analog input 12, selectable through the crosspoint multiplexer. |
| 35 | AIN13 | input | Analog input 13, selectable through the crosspoint multiplexer. |
| 36 | AIN14 | input | Analog input 14, selectable through the crosspoint multiplexer. |
| 37 | AIN15 | input | Analog input 15, selectable through the crosspoint multiplexer. |
| 38 | GPO3 | output | General-purpose output 3, referred to the AVDD1 and AVSS supplies. |
| 39 | REF− | input | Reference 1 negative input terminal, which can span from AVSS to AVDD1 − 1 V. |
| 40 | REF+ | input | Reference 1 positive input terminal, which can span from AVDD1 to AVSS + 1 V; an external reference can be applied between REF+ and REF−. |
| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | LFCSP-40(6x6) |
| Category | ADC/DAC/Data Conversion |
| Pins | 41 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| AVDD1 to AVSS supply voltage | 4.5 | 5 | 5.5 | V | 5 | ||
| AVDD2 to AVSS supply voltage | 2 | 5.5 | V | Nominal range 2 V to 5 V | 5 | ||
| AVSS to DGND voltage | -2.75 | 0 | V | 5 | |||
| IOVDD to DGND supply voltage | 2 | 5.5 | V | Nominal range 2 V to 5 V | 5 | ||
| IOVDD to AVSS voltage | 6.35 | V | For AVSS < DGND | 5 | |||
| Output data rate (ODR) | 5 | 250000 | SPS | 3 | |||
| No missing codes | 24 | Bits | Excluding sinc3 filter ≥ 125 kSPS | 3 | |||
| Integral nonlinearity (INL), all input buffers enabled | INL | 4.5 | 10 | ppm of FSR | All input buffers enabled | 3 | |
| Integral nonlinearity (INL), all input buffers disabled | INL | -4.5 | 1 | 4.5 | ppm of FSR | All input buffers disabled | 3 |
| Offset error | -60 | 60 | µV | Internal short | 3 | ||
| Offset drift | -150 | 150 | nV/°C | Internal short | 3 | ||
| Gain error | -110 | 80 | 110 | ppm of FSR | 3 | ||
| Gain drift | -0.75 | 0.5 | 0.75 | ppm/°C | 3 | ||
| Initial accuracy, REFOUT | -0.12 | 0.12 | % of V | REFOUT, TA = 25°C | 3 | ||
| Temperature coefficient, internal reference | -5 | 2 | 5 | ppm/°C | 0°C to 105°C | 3 | |
| Temperature coefficient, internal reference | -10 | 3 | 10 | ppm/°C | −40°C to +105°C | 3 | |
| Reference load current | ILOAD | -10 | 10 | mA | 3 | ||
| External reference differential input range | VREF | 1 | 2.5 | V | VREF = (REF+) − (REF−) | 4 | |
| Temperature sensor accuracy | -2 | 2 | °C | After user calibration at 25°C | 4 | ||
| GPIO input mode leakage current | -10 | 10 | µA | 4 | |||
| Crystal frequency | 14 | 16 | 16.384 | MHz | 4 | ||
| External clock (CLKIO) frequency | 16 | 16.384 | MHz | 4 | |||
| External clock duty cycle | 30 | 50 | 70 | % | 4 | ||
| Logic input hysteresis | 0.08 | 0.25 | V | IOVDD ≥ 2.7 V | 5 | ||
| Logic input hysteresis | 0.04 | 0.2 | V | IOVDD < 2.7 V | 5 | ||
| Logic input leakage current | -10 | 10 | µA | 5 | |||
| Logic output (DOUT/RDY) leakage current | -10 | 10 | µA | Floating state | 5 | ||
| AVDD1 current | 1.4 | 1.65 | mA | Analog input and reference input buffers (AIN±, REF±) disabled, external reference | 5 | ||
| AVDD1 current | 13 | 16 | mA | Analog input and reference input buffers enabled, external reference | 5 | ||
| AVDD2 current | 4.5 | 5 | mA | External reference | 5 | ||
| AVDD2 current | 4.75 | 5.2 | mA | Internal reference | 5 | ||
| IOVDD current | 2.5 | 2.8 | mA | External clock | 5 | ||
| IOVDD current | 2.75 | 3.1 | mA | Internal clock | 5 | ||
| Power-down mode current | 5 | 10 | µA | Full power-down (including LDO and internal reference) | 5 | ||
| SCLK high pulse width | t3 | 25 | ns | 6 | |||
| SCLK low pulse width | t4 | 25 | ns | 6 | |||
| CS falling edge to DOUT/RDY active time | t1 | 0 | 15 | ns | IOVDD = 4.75 V to 5.5 V | 6 | |
| CS falling edge to DOUT/RDY active time | t1 | 0 | 40 | ns | IOVDD = 2 V to 3.6 V | 6 | |
| SCLK active edge to data valid delay | t2 | 0 | 12.5 | ns | IOVDD = 4.75 V to 5.5 V | 6 | |
| SCLK active edge to data valid delay | t2 | 0 | 25 | ns | IOVDD = 2 V to 3.6 V | 6 | |
| Bus relinquish time after CS inactive edge | t5 | 2.5 | 20 | ns | 6 | ||
| CS falling edge to SCLK active edge setup time | t8 | 0 | ns | 6 | |||
| Data valid to SCLK edge setup time | t9 | 8 | ns | 6 | |||
| Data valid to SCLK edge hold time | t10 | 8 | ns | 6 | |||
| CS rising edge to SCLK edge hold time | t11 | 5 | ns | 6 | |||
| AVDD1, AVDD2 to AVSS | -0.3 | 6.5 | V | 8 | |||
| AVDD1 to DGND | -0.3 | 6.5 | V | 8 | |||
| IOVDD to DGND | -0.3 | 6.5 | V | 8 | |||
| IOVDD to AVSS | -0.3 | 7.5 | V | 8 | |||
| AVSS to DGND | -3.25 | 0.3 | V | 8 | |||
| Analog input voltage to AVSS | -0.3 | V | 8 | ||||
| Reference input voltage to AVSS | -0.3 | V | 8 | ||||
| Digital input voltage to DGND | -0.3 | V | 8 | ||||
| Operating temperature range | -40 | 105 | °C | 8 | |||
| Storage temperature range | -65 | 150 | °C | 8 | |||
| Maximum junction temperature | 150 | °C | 8 | ||||
| REFOUT output voltage | 2.5 | V | With respect to AVSS | 3 | |||
| Thermal resistance θJA, 40-lead 6 mm × 6 mm LFCSP | θJA | 114 | °C/W | 1-layer JEDEC board | 8 | ||
| Thermal resistance θJA, 40-lead 6 mm × 6 mm LFCSP | θJA | 54 | °C/W | 4-layer JEDEC board | 8 | ||
| Thermal resistance θJA, 40-lead 6 mm × 6 mm LFCSP | θJA | 34 | °C/W | 4-layer JEDEC board with 16 thermal vias | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | ESD Rating (Human Body Model) 4 kV Stresses at or above those listed under Absolute Maximum | 8 |
CAD (KiCad official)
- Symbol:
AD7175-8BCPZ-RL7 - Footprint:
Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm - 3D model: LFCSP-40(6x6), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ad7175-8bcpz-etched.step/ad7175-8bcpz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad7175-8bcpz.step/ad7175-8bcpz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (64 pp, sha256
08fcafebb7c88594, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# AD7175-8BCPZ-RL7
**Analog Devices** · Analog To Digital Converters (ADCs) · LFCSP-40(6x6)
AD7175-8BCPZ-RL7 from Analog Devices, in a LFCSP-40(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | AIN16 | input | Analog input 16, selectable through the crosspoint multiplexer; analog input voltage to AVSS is rated −0.3 V to AVDD1 + 0.3 V. |
| 2 | AIN0/REF2− | input | Analog Input 0 and negative terminal of external Reference 2 (REF2−), which can span from AVSS to AVDD1 − 1 V. |
| 3 | AIN1/REF2+ | input | Analog Input 1 and positive terminal of external Reference 2 (REF2+), which spans from AVDD1 to AVSS + 1 V. |
| 4 | AIN2 | input | Analog input 2, selectable through the crosspoint multiplexer; analog input voltage to AVSS is rated −0.3 V to AVDD1 + 0.3 V. |
| 5 | AIN3 | input | Analog input 3, selectable through the crosspoint multiplexer; analog input voltage to AVSS is rated −0.3 V to AVDD1 + 0.3 V. |
| 6 | REFOUT | output | Buffered output of the internal 2.5 V reference, referenced to AVSS, decoupled with a 100 nF capacitor to AVSS. |
| 7 | REGCAPA | power_out | Analog LDO regulator output, to be decoupled to AVSS with a 1 µF capacitor. |
| 8 | AVSS | power_in | Negative analog supply, ranging from 0 V to −2.75 V and nominally set to 0 V. |
| 9 | AVDD1 | power_in | Analog supply voltage 1, 5 V ±10% with respect to AVSS, either a single 5 V supply or a ±2.5 V split supply. |
| 10 | AVDD2 | power_in | Analog supply voltage 2, ranging from 2 V to AVDD1 with respect to AVSS. |
| 11 | PDSW | output | Power-down switch connected to AVSS, controlled by the PDSW bit in the GPIOCON register, able to sink 16 mA maximum. |
| 12 | XTAL1 | input | Input 1 for an external crystal, with a crystal frequency range of 14 MHz to 16.384 MHz. |
| 13 | XTAL2/CLKIO | bidirectional | Input 2 for crystal (XTAL2), or external clock input or internal clock output (CLKIO) at the logic level set by IOVDD; external clock range is 16 MHz to 16.384 MHz. |
| 14 | DOUT/RDY | tri_state | Serial data output, tristated when CS is high, and data-ready output that goes low to indicate conversion completion when CS is low. |
| 15 | DIN | input | Serial data input to the input shift register, clocked in on the rising edge of SCLK. |
| 16 | SCLK | input | Serial clock input for data transfers to and from the ADC, with a Schmitt-triggered input. |
| 17 | CS | input | Active-low chip select input; it can be hardwired low for 3-wire operation, and DOUT/RDY is tristated when CS is high. |
| 18 | ERROR | bidirectional | Error input/output or general-purpose output referenced between IOVDD and DGND, configurable as an active-low error input, an active-low open-drain error output, or a general-purpose output. |
| 19 | SYNC | input | Synchronization input that allows synchronization of the digital filters and analog modulators when using multiple devices. |
| 20 | IOVDD | power_in | Digital I/O supply, 2 V to 5 V nominal and independent of AVDD1 and AVDD2; if AVSS is set to −2.5 V, IOVDD must not exceed 3.6 V. |
| 21 | DGND | power_in | Digital ground. |
| 22 | REGCAPD | power_out | Digital LDO regulator output for decoupling only, to be decoupled to DGND with a 1 µF capacitor. |
| 23 | GPIO0 | bidirectional | General-purpose input/output 0, referred to the AVDD1 and AVSS supplies, so outputs have a 5 V amplitude. |
| 24 | GPIO1 | bidirectional | General-purpose input/output 1, referred to the AVDD1 and AVSS supplies, so outputs have a 5 V amplitude. |
| 25 | GPO2 | output | General-purpose output 2, referred to the AVDD1 and AVSS supplies. |
| 26 | AIN4 | input | Analog input 4, selectable through the crosspoint multiplexer. |
| 27 | AIN5 | input | Analog input 5, selectable through the crosspoint multiplexer. |
| 28 | AIN6 | input | Analog input 6, selectable through the crosspoint multiplexer. |
| 29 | AIN7 | input | Analog input 7, selectable through the crosspoint multiplexer. |
| 30 | AIN8 | input | Analog input 8, selectable through the crosspoint multiplexer. |
| 31 | AIN9 | input | Analog input 9, selectable through the crosspoint multiplexer. |
| 32 | AIN10 | input | Analog input 10, selectable through the crosspoint multiplexer. |
| 33 | AIN11 | input | Analog input 11, selectable through the crosspoint multiplexer. |
| 34 | AIN12 | input | Analog input 12, selectable through the crosspoint multiplexer. |
| 35 | AIN13 | input | Analog input 13, selectable through the crosspoint multiplexer. |
| 36 | AIN14 | input | Analog input 14, selectable through the crosspoint multiplexer. |
| 37 | AIN15 | input | Analog input 15, selectable through the crosspoint multiplexer. |
| 38 | GPO3 | output | General-purpose output 3, referred to the AVDD1 and AVSS supplies. |
| 39 | REF− | input | Reference 1 negative input terminal, which can span from AVSS to AVDD1 − 1 V. |
| 40 | REF+ | input | Reference 1 positive input terminal, which can span from AVDD1 to AVSS + 1 V; an external reference can be applied between REF+ and REF−. |
| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | LFCSP-40(6x6) |
| Category | ADC/DAC/Data Conversion |
| Pins | 41 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| AVDD1 to AVSS supply voltage | | 4.5 | 5 | 5.5 | V | | 5 |
| AVDD2 to AVSS supply voltage | | 2 | | 5.5 | V | Nominal range 2 V to 5 V | 5 |
| AVSS to DGND voltage | | -2.75 | 0 | | V | | 5 |
| IOVDD to DGND supply voltage | | 2 | | 5.5 | V | Nominal range 2 V to 5 V | 5 |
| IOVDD to AVSS voltage | | | | 6.35 | V | For AVSS < DGND | 5 |
| Output data rate (ODR) | | 5 | | 250000 | SPS | | 3 |
| No missing codes | | 24 | | | Bits | Excluding sinc3 filter ≥ 125 kSPS | 3 |
| Integral nonlinearity (INL), all input buffers enabled | INL | | 4.5 | 10 | ppm of FSR | All input buffers enabled | 3 |
| Integral nonlinearity (INL), all input buffers disabled | INL | -4.5 | 1 | 4.5 | ppm of FSR | All input buffers disabled | 3 |
| Offset error | | -60 | | 60 | µV | Internal short | 3 |
| Offset drift | | -150 | | 150 | nV/°C | Internal short | 3 |
| Gain error | | -110 | 80 | 110 | ppm of FSR | | 3 |
| Gain drift | | -0.75 | 0.5 | 0.75 | ppm/°C | | 3 |
| Initial accuracy, REFOUT | | -0.12 | | 0.12 | % of V | REFOUT, TA = 25°C | 3 |
| Temperature coefficient, internal reference | | -5 | 2 | 5 | ppm/°C | 0°C to 105°C | 3 |
| Temperature coefficient, internal reference | | -10 | 3 | 10 | ppm/°C | −40°C to +105°C | 3 |
| Reference load current | ILOAD | -10 | | 10 | mA | | 3 |
| External reference differential input range | VREF | 1 | 2.5 | | V | VREF = (REF+) − (REF−) | 4 |
| Temperature sensor accuracy | | -2 | | 2 | °C | After user calibration at 25°C | 4 |
| GPIO input mode leakage current | | -10 | | 10 | µA | | 4 |
| Crystal frequency | | 14 | 16 | 16.384 | MHz | | 4 |
| External clock (CLKIO) frequency | | 16 | | 16.384 | MHz | | 4 |
| External clock duty cycle | | 30 | 50 | 70 | % | | 4 |
| Logic input hysteresis | | | 0.08 | 0.25 | V | IOVDD ≥ 2.7 V | 5 |
| Logic input hysteresis | | | 0.04 | 0.2 | V | IOVDD < 2.7 V | 5 |
| Logic input leakage current | | -10 | | 10 | µA | | 5 |
| Logic output (DOUT/RDY) leakage current | | -10 | | 10 | µA | Floating state | 5 |
| AVDD1 current | | | 1.4 | 1.65 | mA | Analog input and reference input buffers (AIN±, REF±) disabled, external reference | 5 |
| AVDD1 current | | | 13 | 16 | mA | Analog input and reference input buffers enabled, external reference | 5 |
| AVDD2 current | | | 4.5 | 5 | mA | External reference | 5 |
| AVDD2 current | | | 4.75 | 5.2 | mA | Internal reference | 5 |
| IOVDD current | | | 2.5 | 2.8 | mA | External clock | 5 |
| IOVDD current | | | 2.75 | 3.1 | mA | Internal clock | 5 |
| Power-down mode current | | | 5 | 10 | µA | Full power-down (including LDO and internal reference) | 5 |
| SCLK high pulse width | t3 | 25 | | | ns | | 6 |
| SCLK low pulse width | t4 | 25 | | | ns | | 6 |
| CS falling edge to DOUT/RDY active time | t1 | 0 | | 15 | ns | IOVDD = 4.75 V to 5.5 V | 6 |
| CS falling edge to DOUT/RDY active time | t1 | 0 | | 40 | ns | IOVDD = 2 V to 3.6 V | 6 |
| SCLK active edge to data valid delay | t2 | 0 | | 12.5 | ns | IOVDD = 4.75 V to 5.5 V | 6 |
| SCLK active edge to data valid delay | t2 | 0 | | 25 | ns | IOVDD = 2 V to 3.6 V | 6 |
| Bus relinquish time after CS inactive edge | t5 | 2.5 | | 20 | ns | | 6 |
| CS falling edge to SCLK active edge setup time | t8 | 0 | | | ns | | 6 |
| Data valid to SCLK edge setup time | t9 | 8 | | | ns | | 6 |
| Data valid to SCLK edge hold time | t10 | 8 | | | ns | | 6 |
| CS rising edge to SCLK edge hold time | t11 | 5 | | | ns | | 6 |
| AVDD1, AVDD2 to AVSS | | -0.3 | | 6.5 | V | | 8 |
| AVDD1 to DGND | | -0.3 | | 6.5 | V | | 8 |
| IOVDD to DGND | | -0.3 | | 6.5 | V | | 8 |
| IOVDD to AVSS | | -0.3 | | 7.5 | V | | 8 |
| AVSS to DGND | | -3.25 | | 0.3 | V | | 8 |
| Analog input voltage to AVSS | | -0.3 | | | V | | 8 |
| Reference input voltage to AVSS | | -0.3 | | | V | | 8 |
| Digital input voltage to DGND | | -0.3 | | | V | | 8 |
| Operating temperature range | | -40 | | 105 | °C | | 8 |
| Storage temperature range | | -65 | | 150 | °C | | 8 |
| Maximum junction temperature | | | | 150 | °C | | 8 |
| REFOUT output voltage | | | 2.5 | | V | With respect to AVSS | 3 |
| Thermal resistance θJA, 40-lead 6 mm × 6 mm LFCSP | θJA | | 114 | | °C/W | 1-layer JEDEC board | 8 |
| Thermal resistance θJA, 40-lead 6 mm × 6 mm LFCSP | θJA | | 54 | | °C/W | 4-layer JEDEC board | 8 |
| Thermal resistance θJA, 40-lead 6 mm × 6 mm LFCSP | θJA | | 34 | | °C/W | 4-layer JEDEC board with 16 thermal vias | 8 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | | ESD Rating (Human Body Model) 4 kV Stresses at or above those listed under Absolute Maximum | 8 |
## CAD (KiCad official)
- Symbol: `AD7175-8BCPZ-RL7`
- Footprint: `Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm`
- 3D model: LFCSP-40(6x6), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `ad7175-8bcpz-etched.step` / `ad7175-8bcpz-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ad7175-8bcpz.step` / `ad7175-8bcpz.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/AD7175-8.pdf) (64 pp, sha256 `08fcafebb7c88594`, retrieved 2026-11-12, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ad7175-8bcpz-datasheet.pdf)