Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

AD7175-8BCPZ-RL7

Analog Devices · Analog To Digital Converters (ADCs) · LFCSP-40(6x6)

AD7175-8BCPZ-RL7 from Analog Devices, in a LFCSP-40(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AIN16 input Analog input 16, selectable through the crosspoint multiplexer; analog input voltage to AVSS is rated −0.3 V to AVDD1 + 0.3 V.
2 AIN0/REF2− input Analog Input 0 and negative terminal of external Reference 2 (REF2−), which can span from AVSS to AVDD1 − 1 V.
3 AIN1/REF2+ input Analog Input 1 and positive terminal of external Reference 2 (REF2+), which spans from AVDD1 to AVSS + 1 V.
4 AIN2 input Analog input 2, selectable through the crosspoint multiplexer; analog input voltage to AVSS is rated −0.3 V to AVDD1 + 0.3 V.
5 AIN3 input Analog input 3, selectable through the crosspoint multiplexer; analog input voltage to AVSS is rated −0.3 V to AVDD1 + 0.3 V.
6 REFOUT output Buffered output of the internal 2.5 V reference, referenced to AVSS, decoupled with a 100 nF capacitor to AVSS.
7 REGCAPA power_out Analog LDO regulator output, to be decoupled to AVSS with a 1 µF capacitor.
8 AVSS power_in Negative analog supply, ranging from 0 V to −2.75 V and nominally set to 0 V.
9 AVDD1 power_in Analog supply voltage 1, 5 V ±10% with respect to AVSS, either a single 5 V supply or a ±2.5 V split supply.
10 AVDD2 power_in Analog supply voltage 2, ranging from 2 V to AVDD1 with respect to AVSS.
11 PDSW output Power-down switch connected to AVSS, controlled by the PDSW bit in the GPIOCON register, able to sink 16 mA maximum.
12 XTAL1 input Input 1 for an external crystal, with a crystal frequency range of 14 MHz to 16.384 MHz.
13 XTAL2/CLKIO bidirectional Input 2 for crystal (XTAL2), or external clock input or internal clock output (CLKIO) at the logic level set by IOVDD; external clock range is 16 MHz to 16.384 MHz.
14 DOUT/RDY tri_state Serial data output, tristated when CS is high, and data-ready output that goes low to indicate conversion completion when CS is low.
15 DIN input Serial data input to the input shift register, clocked in on the rising edge of SCLK.
16 SCLK input Serial clock input for data transfers to and from the ADC, with a Schmitt-triggered input.
17 CS input Active-low chip select input; it can be hardwired low for 3-wire operation, and DOUT/RDY is tristated when CS is high.
18 ERROR bidirectional Error input/output or general-purpose output referenced between IOVDD and DGND, configurable as an active-low error input, an active-low open-drain error output, or a general-purpose output.
19 SYNC input Synchronization input that allows synchronization of the digital filters and analog modulators when using multiple devices.
20 IOVDD power_in Digital I/O supply, 2 V to 5 V nominal and independent of AVDD1 and AVDD2; if AVSS is set to −2.5 V, IOVDD must not exceed 3.6 V.
21 DGND power_in Digital ground.
22 REGCAPD power_out Digital LDO regulator output for decoupling only, to be decoupled to DGND with a 1 µF capacitor.
23 GPIO0 bidirectional General-purpose input/output 0, referred to the AVDD1 and AVSS supplies, so outputs have a 5 V amplitude.
24 GPIO1 bidirectional General-purpose input/output 1, referred to the AVDD1 and AVSS supplies, so outputs have a 5 V amplitude.
25 GPO2 output General-purpose output 2, referred to the AVDD1 and AVSS supplies.
26 AIN4 input Analog input 4, selectable through the crosspoint multiplexer.
27 AIN5 input Analog input 5, selectable through the crosspoint multiplexer.
28 AIN6 input Analog input 6, selectable through the crosspoint multiplexer.
29 AIN7 input Analog input 7, selectable through the crosspoint multiplexer.
30 AIN8 input Analog input 8, selectable through the crosspoint multiplexer.
31 AIN9 input Analog input 9, selectable through the crosspoint multiplexer.
32 AIN10 input Analog input 10, selectable through the crosspoint multiplexer.
33 AIN11 input Analog input 11, selectable through the crosspoint multiplexer.
34 AIN12 input Analog input 12, selectable through the crosspoint multiplexer.
35 AIN13 input Analog input 13, selectable through the crosspoint multiplexer.
36 AIN14 input Analog input 14, selectable through the crosspoint multiplexer.
37 AIN15 input Analog input 15, selectable through the crosspoint multiplexer.
38 GPO3 output General-purpose output 3, referred to the AVDD1 and AVSS supplies.
39 REF− input Reference 1 negative input terminal, which can span from AVSS to AVDD1 − 1 V.
40 REF+ input Reference 1 positive input terminal, which can span from AVDD1 to AVSS + 1 V; an external reference can be applied between REF+ and REF−.
41 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Analog Devices
Package LFCSP-40(6x6)
Category ADC/DAC/Data Conversion
Pins 41

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
AVDD1 to AVSS supply voltage 4.5 5 5.5 V 5
AVDD2 to AVSS supply voltage 2 5.5 V Nominal range 2 V to 5 V 5
AVSS to DGND voltage -2.75 0 V 5
IOVDD to DGND supply voltage 2 5.5 V Nominal range 2 V to 5 V 5
IOVDD to AVSS voltage 6.35 V For AVSS < DGND 5
Output data rate (ODR) 5 250000 SPS 3
No missing codes 24 Bits Excluding sinc3 filter ≥ 125 kSPS 3
Integral nonlinearity (INL), all input buffers enabled INL 4.5 10 ppm of FSR All input buffers enabled 3
Integral nonlinearity (INL), all input buffers disabled INL -4.5 1 4.5 ppm of FSR All input buffers disabled 3
Offset error -60 60 µV Internal short 3
Offset drift -150 150 nV/°C Internal short 3
Gain error -110 80 110 ppm of FSR 3
Gain drift -0.75 0.5 0.75 ppm/°C 3
Initial accuracy, REFOUT -0.12 0.12 % of V REFOUT, TA = 25°C 3
Temperature coefficient, internal reference -5 2 5 ppm/°C 0°C to 105°C 3
Temperature coefficient, internal reference -10 3 10 ppm/°C −40°C to +105°C 3
Reference load current ILOAD -10 10 mA 3
External reference differential input range VREF 1 2.5 V VREF = (REF+) − (REF−) 4
Temperature sensor accuracy -2 2 °C After user calibration at 25°C 4
GPIO input mode leakage current -10 10 µA 4
Crystal frequency 14 16 16.384 MHz 4
External clock (CLKIO) frequency 16 16.384 MHz 4
External clock duty cycle 30 50 70 % 4
Logic input hysteresis 0.08 0.25 V IOVDD ≥ 2.7 V 5
Logic input hysteresis 0.04 0.2 V IOVDD < 2.7 V 5
Logic input leakage current -10 10 µA 5
Logic output (DOUT/RDY) leakage current -10 10 µA Floating state 5
AVDD1 current 1.4 1.65 mA Analog input and reference input buffers (AIN±, REF±) disabled, external reference 5
AVDD1 current 13 16 mA Analog input and reference input buffers enabled, external reference 5
AVDD2 current 4.5 5 mA External reference 5
AVDD2 current 4.75 5.2 mA Internal reference 5
IOVDD current 2.5 2.8 mA External clock 5
IOVDD current 2.75 3.1 mA Internal clock 5
Power-down mode current 5 10 µA Full power-down (including LDO and internal reference) 5
SCLK high pulse width t3 25 ns 6
SCLK low pulse width t4 25 ns 6
CS falling edge to DOUT/RDY active time t1 0 15 ns IOVDD = 4.75 V to 5.5 V 6
CS falling edge to DOUT/RDY active time t1 0 40 ns IOVDD = 2 V to 3.6 V 6
SCLK active edge to data valid delay t2 0 12.5 ns IOVDD = 4.75 V to 5.5 V 6
SCLK active edge to data valid delay t2 0 25 ns IOVDD = 2 V to 3.6 V 6
Bus relinquish time after CS inactive edge t5 2.5 20 ns 6
CS falling edge to SCLK active edge setup time t8 0 ns 6
Data valid to SCLK edge setup time t9 8 ns 6
Data valid to SCLK edge hold time t10 8 ns 6
CS rising edge to SCLK edge hold time t11 5 ns 6
AVDD1, AVDD2 to AVSS -0.3 6.5 V 8
AVDD1 to DGND -0.3 6.5 V 8
IOVDD to DGND -0.3 6.5 V 8
IOVDD to AVSS -0.3 7.5 V 8
AVSS to DGND -3.25 0.3 V 8
Analog input voltage to AVSS -0.3 V 8
Reference input voltage to AVSS -0.3 V 8
Digital input voltage to DGND -0.3 V 8
Operating temperature range -40 105 °C 8
Storage temperature range -65 150 °C 8
Maximum junction temperature 150 °C 8
REFOUT output voltage 2.5 V With respect to AVSS 3
Thermal resistance θJA, 40-lead 6 mm × 6 mm LFCSP θJA 114 °C/W 1-layer JEDEC board 8
Thermal resistance θJA, 40-lead 6 mm × 6 mm LFCSP θJA 54 °C/W 4-layer JEDEC board 8
Thermal resistance θJA, 40-lead 6 mm × 6 mm LFCSP θJA 34 °C/W 4-layer JEDEC board with 16 thermal vias 8

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing Abs ESD Rating (Human Body Model) 4 kV Stresses at or above those listed under Absolute Maximum 8

CAD (KiCad official)

  • Symbol: AD7175-8BCPZ-RL7
  • Footprint: Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm
  • 3D model: LFCSP-40(6x6), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ad7175-8bcpz-etched.step / ad7175-8bcpz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad7175-8bcpz.step / ad7175-8bcpz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (64 pp, sha256 08fcafebb7c88594, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF