main
History Download
Ray Publish 0.1.0 140b8e0

AD7173-8BCPZ

Analog Devices · Analog To Digital Converters (ADCs) · LFCSP-40(6x6)

AD7173-8BCPZ from Analog Devices, in a LFCSP-40(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 AIN16 passive Analog input 16, selectable through the cross point multiplexer.
2 AIN0/REF2− passive Analog input 0, selectable through the cross point multiplexer, and negative terminal of external Reference 2, which can span from AVSS to AVDD1 − 1 V.
3 AIN1/REF2+ passive Analog input 1, selectable through the cross point multiplexer, and positive terminal of external Reference 2, which can span from AVDD1 to AVSS + 1 V.
4 AIN2 passive Analog input 2, selectable through the cross point multiplexer.
5 AIN3 passive Analog input 3, selectable through the cross point multiplexer.
6 REFOUT output Buffered output of the internal reference, 2.5 V with respect to AVSS.
7 REGCAPA output Analog LDO regulator output that must be decoupled to AVSS using a 1 µF capacitor.
8 AVSS power_in Negative analog supply ranging from 0 V to −2.75 V, nominally set to 0 V.
9 AVDD1 power_in Analog supply voltage 1, ranging from 3.0 V minimum to 5.5 V maximum with respect to AVSS.
10 AVDD2 power_in Analog supply voltage 2, ranging from 2 V to AVDD1 with respect to AVSS.
11 PDSW output Power-down switch connected to AVSS, controlled by the PDSW bit in the GPIOCON register.
12 XTAL1 passive Input 1 for the crystal.
13 XTAL2/CLKIO bidirectional Input 2 for the crystal (XTAL2) or clock input/output (CLKIO), configured by the CLOCKSEL bits in the ADCMODE register.
14 DOUT/RDY output Serial data output (DOUT) and data ready output (RDY); tristated when CS is high, and goes low to indicate conversion completion when CS is low and no register is being read.
15 DIN input Serial data input to the ADC input shift register, clocked in on the rising edge of SCLK.
16 SCLK input Serial clock input for data transfers to and from the ADC, with a Schmitt trigger input for opto-isolated applications.
17 CS input Active-low chip select input used to select the ADC; it can be hardwired low for 3-wire operation.
18 ERROR bidirectional Configurable as an active-low error input, an active-low open-drain error output, or a general-purpose output referenced between IOVDD and DGND.
19 SYNC input Synchronization input that allows the digital filters and analog modulators of multiple AD7173-8 devices to be synchronized.
20 IOVDD power_in Digital I/O supply voltage ranging from 2 V to 5 V, independent of AVDD1 and AVDD2; if AVSS is set to −2.5 V, IOVDD must not exceed 3.6 V.
21 DGND power_in Digital ground.
22 REGCAPD output Digital LDO regulator output, for decoupling purposes only, to be decoupled to DGND using a 1 µF capacitor.
23 GPIO0 bidirectional General-purpose input/output with logic levels referenced to the AVDD1 and AVSS supplies.
24 GPIO1 bidirectional General-purpose input/output with logic levels referenced to the AVDD1 and AVSS supplies.
25 GPO2 output General-purpose output with logic levels referenced to the AVDD1 and AVSS supplies.
26 AIN4 passive Analog input 4, selectable through the cross point multiplexer.
27 AIN5 passive Analog input 5, selectable through the cross point multiplexer.
28 AIN6 passive Analog input 6, selectable through the cross point multiplexer.
29 AIN7 passive Analog input 7, selectable through the cross point multiplexer.
30 AIN8 passive Analog input 8, selectable through the cross point multiplexer.
31 AIN9 passive Analog input 9, selectable through the cross point multiplexer.
32 AIN10 passive Analog input 10, selectable through the cross point multiplexer.
33 AIN11 passive Analog input 11, selectable through the cross point multiplexer.
34 AIN12 passive Analog input 12, selectable through the cross point multiplexer.
35 AIN13 passive Analog input 13, selectable through the cross point multiplexer.
36 AIN14 passive Analog input 14, selectable through the cross point multiplexer.
37 AIN15 passive Analog input 15, selectable through the cross point multiplexer.
38 GPO3 output General-purpose output with logic levels referenced to the AVDD1 and AVSS supplies.
39 REF− passive Reference 1 negative input terminal, which can span from AVSS to AVDD1 − 1 V.
40 REF+ passive Reference 1 positive input terminal, which can span from AVDD1 to AVSS + 1 V.
41 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Analog Devices
Package LFCSP-40(6x6)
Category ADC/DAC/Data Conversion
Pins 41

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Data Rate (ODR) ODR 1.25 31250 SPS 4
Integral Nonlinearity (INL), 2.5 V reference INL -7.5 3 7.5 ppm/FSR 2.5 V reference 4
Integral Nonlinearity (INL), 5 V reference INL -5 5 ppm/FSR 5 V reference 4
Offset Error -40 40 µV Internal short 4
Offset Drift -350 350 nV/°C Internal short 4
Gain Error -50 10 50 ppm/FSR 25°C, AVDD1 = 5 V 4
Gain Drift vs. Temperature -1 0.5 1 ppm/FSR/°C 4
Initial Accuracy (REFOUT) -0.1 0.1 % of V TA = 25°C 4
Internal Reference Temperature Coefficient, 0°C to +105°C 3.5 81 ppm/°C 0°C to +105°C 4
Internal Reference Temperature Coefficient, −40°C to +105°C 3.5 101 ppm/°C −40°C to +105°C 4
Reference Load Current IL -10 10 mA 4
External Reference Input Voltage (REF+ − REF−) 1 2.5 V Reference input = (REF+) − (REF−) 5
Average Reference Input Current -9 9 µA/V Buffers disabled 5
Temperature Sensor Accuracy -2 2 °C After user calibration at 25°C 5
Burnout Current Source/Sink -10 10 µA Analog input buffers must be enabled 5
Power Supply Rejection 90 dB AVDD1 and AVDD2, VIN = 1 V 4
Common-Mode Rejection, DC 95 dB VIN = 0.1 V, at DC 4
Normal Mode Rejection, internal clock 71 90 dB Internal clock, 20 SPS ODR (post filter) 4
Input Current, buffers disabled -6 6 µA/V Buffers disabled 4
GPIO Output High Voltage, referenced to AVSS VOH 4 V AVDD1 − AVSS = 5 V; ISOURCE = 200 µA 5
GPIO Output Low Voltage, referenced to AVSS VOL 0.4 V AVDD1 − AVSS = 5 V; ISINK = 800 µA 5
GPIO Input High Voltage, referenced to AVSS VIH 3 V AVDD1 − AVSS = 5 V 5
GPIO Input Low Voltage, referenced to AVSS VIL 0.7 V AVDD1 − AVSS = 5 V 5
GPIO Output High Voltage, referenced to AVSS VOH 2.7 V AVDD1 − AVSS = 3.3 V; ISOURCE = 200 µA 5
GPIO Output Low Voltage, referenced to AVSS VOL 0.27 V AVDD1 − AVSS = 3.3 V; ISINK = 800 µA 5
GPIO Input High Voltage, referenced to AVSS VIH 2 V AVDD1 − AVSS = 3.3 V 5
GPIO Input Low Voltage, referenced to AVSS VIL 0.45 V AVDD1 − AVSS = 3.3 V 5
Absolute Max: AVDD1, AVDD2 to AVSS -0.3 6.5 V 9
Absolute Max: AVDD1 to DGND -0.3 6.5 V 9
Absolute Max: IOVDD to DGND -0.3 6.5 V 9
Absolute Max: IOVDD to AVSS -0.3 7.5 V 9
Absolute Max: AVSS to DGND -3.25 0.3 V 9
Absolute Max: Analog Input Voltage to AVSS -0.3 V Upper limit printed as AVDD1 + 0.3 V 9
Absolute Max: Reference Input Voltage to AVSS -0.3 V Upper limit printed as AVDD1 + 0.3 V 9
Absolute Max: Digital Input Voltage to DGND -0.3 V Upper limit printed as IOVDD + 0.3 V 9
Operating Temperature Range TA -40 105 °C 9
Recommended: Analog Supply Voltage 1 (AVDD1) AVDD1 3 5.5 V AVSS = DGND = 0 V 4
Recommended: Analog Supply Voltage 2 (AVDD2) AVDD2 2 5.5 V AVSS = DGND = 0 V 4
Recommended: Digital I/O Supply (IOVDD) IOVDD 2 5.5 V AVSS = DGND = 0 V 4
Recommended: Negative Analog Supply (AVSS) AVSS -2.75 0 V Nominally 0 V 10
SCLK High Pulse Width t3 25 ns SCLK high pulse width 8
SCLK Low Pulse Width t4 25 ns SCLK low pulse width 8
CS Falling Edge to DOUT/RDY Active Time t1 0 ns CS falling edge to DOUT/RDY active time 8
CS Falling Edge to DOUT/RDY Active Time t1 15 ns IOVDD = 4.5 V to 5.5 V 8
CS Falling Edge to DOUT/RDY Active Time t1 40 ns IOVDD = 2 V to 3.6 V 8
SCLK Active Edge to Data Valid Delay t2 0 ns SCLK active edge to data valid delay 8
SCLK Active Edge to Data Valid Delay t2 12 ns IOVDD = 4.5 V to 5.5 V 8
SCLK Active Edge to Data Valid Delay t2 25 ns IOVDD = 2 V to 3.6 V 8
Bus Relinquish Time After CS Inactive Edge t5 2.5 ns Bus relinquish time after CS inactive edge 8
Bus Relinquish Time After CS Inactive Edge t5 20 ns Bus relinquish time after CS inactive edge 8
SCLK Inactive Edge to CS Inactive Edge t6 0 ns SCLK inactive edge to CS inactive edge 8
SCLK Inactive Edge to DOUT/RDY High/Low t7 10 ns SCLK inactive edge to DOUT/RDY high/low 8
CS Falling Edge to SCLK Active Edge Setup Time t8 0 ns CS falling edge to SCLK active edge setup time 8
Data Valid to SCLK Edge Setup Time t9 8 ns Data valid to SCLK edge setup time 8
Data Valid to SCLK Edge Hold Time t10 8 ns Data valid to SCLK edge hold time 8
CS Rising Edge to SCLK Edge Hold Time t11 5 ns CS rising edge to SCLK edge hold time 8
Thermal Resistance θJA, 40-lead 6 mm × 6 mm LFCSP, 1-layer JEDEC board θJA 114 °C/W 1-layer JEDEC board 9
Thermal Resistance θJA, 40-lead 6 mm × 6 mm LFCSP, 4-layer JEDEC board θJA 54 °C/W 4-layer JEDEC board 9
Thermal Resistance θJA, 40-lead 6 mm × 6 mm LFCSP, 4-layer JEDEC board with 16 thermal vias θJA 34 °C/W 4-layer JEDEC board with 16 thermal vias 9

CAD (KiCad official)

  • Symbol: AD7173-8BCPZ
  • Footprint: Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm
  • 3D model: LFCSP-40(6x6), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.75 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ad7173-8bcpz-etched.step / ad7173-8bcpz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad7173-8bcpz.step / ad7173-8bcpz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (64 pp, sha256 0587d78edc631435, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF