AD586JNZ

{
  "slug": "ad586jnz",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Voltage References, PDIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management",
    "ad586jnz",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ad586jnz.kicad_sym",
    "ad586jnz.kicad_mod",
    "ad586jnz.glb",
    "ad586jnz.step",
    "ad586jnz.lbr",
    "docs/hero.png",
    "docs/ad586jnz-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ad586jnz-hero.glb",
    "ad586jnz-hero.overlay.json",
    "ad586jnz-etched.glb"
  ],
  "component": {
    "mpn": "AD586JNZ",
    "manufacturer": "Analog Devices",
    "package": "PDIP-8",
    "pin_count": 8,
    "category": "Power Management",
    "subcategory": "Voltage References",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD586.pdf",
    "parts": {
      "symbol": "ad586jnz.kicad_sym",
      "footprint": "ad586jnz.kicad_mod",
      "model_3d": "ad586jnz-hero.glb",
      "model_3d_plain": "ad586jnz-etched.glb",
      "model_3d_step": "ad586jnz-etched.step",
      "model_3d_step_plain": "ad586jnz.step",
      "lbr": "ad586jnz.lbr"
    },
    "distributor_links": {
      "lcsc": "C650284",
      "digikey": "AD586JNZ-ND",
      "mouser": "584-AD586JNZ"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T20:58:17Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "AD586JNZ-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-AD586JNZ",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "TP1",
        "type": "unconnected",
        "description": "Factory trim pad (internal test point); make no connections to this pin other than a dummy PCB pad."
      },
      {
        "number": "2",
        "name": "VIN",
        "type": "power_in",
        "description": "Input voltage supply; the absolute maximum VIN to ground is 36 V and the device requires less than 3 mA quiescent current from a 12 V or 15 V supply."
      },
      {
        "number": "3",
        "name": "TP1",
        "type": "unconnected",
        "description": "Factory trim pad (internal test point); make no connections to this pin other than a dummy PCB pad."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference; the device produces its 5 V output at pin 6 when pin 2 is powered and pin 4 is grounded."
      },
      {
        "number": "5",
        "name": "TRIM",
        "type": "passive",
        "description": "Optional external fine trim input; the trim circuit in Figure 6 (10 kΩ) can offset the output by as much as 300 mV with minimal effect on other characteristics."
      },
      {
        "number": "6",
        "name": "VOUT",
        "type": "power_out",
        "description": "5 V output voltage; the output can source or sink 10 mA and is safe for indefinite short to ground or VIN."
      },
      {
        "number": "7",
        "name": "TP1",
        "type": "unconnected",
        "description": "Factory trim pad (internal test point); make no connections to this pin other than a dummy PCB pad."
      },
      {
        "number": "8",
        "name": "NOISE REDUCTION",
        "type": "passive",
        "description": "Optional noise reduction filter pin; an external 1 µF capacitor to ground reduces the Zener noise contribution (3 dB point near 12 Hz, high-frequency noise reduced to about 160 µV p-p)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Table 4 prints pin 8 mnemonic as 'NOICE REDUCTION', a typo; Figure 2 and the block diagram show 'NOI; Pins 1, 3 and 7 are all named TP1 and are factory test pads (no connect). Their type is set to uncon; The datasheet pinout is given for the N-8 PDIP package (Figure 2). The ordering guide lists AD586JNZ"
        ],
        "pages_sent": 16,
        "cost_usd": 0.075,
        "at": "2026-10-30T20:58:10"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/AD586.pdf",
        "pages": 16,
        "sha256": "e0fe4ad99ffe1bcf",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ad586jnz.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ad586jnz-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "733507309cb198eeb5fa751dea5c5f7ebcf3c47191e6f96f4d6360845651cdfd",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "N-8",
      "source_page": 13,
      "D": {
        "nom_mm": 9.271,
        "range_mm": [
          9.017,
          10.16
        ]
      },
      "E1": {
        "nom_mm": 6.35,
        "range_mm": [
          6.096,
          7.112
        ]
      },
      "E": {
        "nom_mm": 7.874,
        "range_mm": [
          7.62,
          8.255
        ]
      },
      "e": {
        "nom_mm": 2.54,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 5.334,
        "range_mm": [
          null,
          5.334
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "ad586jnz.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}