component
AD5625BRUZ
Public Made by Adomby adom
Analog Devices Digital To Analog Converters (DACs), TSSOP-14. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 3d ago |
| viewers | 3d ago |
| ad5625bruz-etched.glb | 3d ago |
| ad5625bruz-etched.step | 3d ago |
| ad5625bruz-hero.glb | 3d ago |
| ad5625bruz-hero.overlay.json | 3d ago |
| ad5625bruz.glb | 3d ago |
| ad5625bruz.kicad_mod | 3d ago |
| ad5625bruz.kicad_sym | 3d ago |
| ad5625bruz.lbr | 3d ago |
| ad5625bruz.step | 3d ago |
| package.json | 3d ago |
| page.json | 3d ago |
| README.md | 3d ago |
| verification.json | 3d ago |
AD5625BRUZ
Analog Devices · Digital To Analog Converters (DACs) · TSSOP-14
AD5625BRUZ from Analog Devices, in a TSSOP-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LDAC | input | Pulsing this pin low allows any or all DAC registers to be updated if the input registers have new data, or it can be tied permanently low. |
| 2 | ADDR1 | input | Three-state address input that sets the two least significant bits (A1, A0) of the 7-bit slave address. |
| 3 | VDD | power_in | Power supply input operable from 2.7 V to 5.5 V, to be decoupled with a 10 µF capacitor in parallel with a 0.1 µF capacitor to GND. |
| 4 | VOUTA | output | Analog output voltage from DAC A, with the output amplifier operating rail-to-rail. |
| 5 | VOUTC | output | Analog output voltage from DAC C, with the output amplifier operating rail-to-rail. |
| 6 | POR | input | Power-on reset pin: tying it to GND powers the device up to 0 V, and tying it to VDD powers it up to midscale. |
| 7 | VREFIN | input | Reference input pin for the AD5625, which has no internal reference and requires an external reference voltage to set the DAC output range. |
| 8 | ADDR2 | input | Three-state address input that sets bits A3 and A2 of the 7-bit slave address. |
| 9 | CLR | input | Falling-edge sensitive asynchronous clear input that loads zero scale to all input and DAC registers, clearing the output to 0 V. |
| 10 | VOUTD | output | Analog output voltage from DAC D, with the output amplifier operating rail-to-rail. |
| 11 | VOUTB | output | Analog output voltage from DAC B, with the output amplifier operating rail-to-rail. |
| 12 | GND | power_in | Ground reference point for all circuitry on the device. |
| 13 | SDA | bidirectional | Bidirectional open-drain serial data line that should be pulled to the supply with an external pull-up resistor. |
| 14 | SCL | input | Serial clock line used in conjunction with SDA to clock data into or out of the 16-bit input register. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSSOP-14 |
| Category | Data Converters |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power supply voltage VDD | VDD | 2.7 | 5.5 | V | 6 | ||
| Relative Accuracy | INL | -1 | 0.5 | 1 | LSB | 5 | |
| Differential Nonlinearity | DNL | -0.25 | 0.25 | LSB | Guaranteed monotonic by design | 5 | |
| Zero-Code Error | 2 | 10 | mV | All 0s loaded to DAC register | 5 | ||
| Offset Error | -10 | 1 | 10 | mV | 5 | ||
| Full-Scale Error | -0.5 | -0.1 | 0.5 | % FSR | All 1s loaded to DAC register | 5 | |
| Gain Error | -1 | 0.1 | 1 | % FSR | 5 | ||
| Zero-Code Error Drift | -2 | 2 | µV/°C | 5 | |||
| Gain Temperature Coefficient | -2.5 | 2.5 | ppm Of FSR/°C | 5 | |||
| Reference Current | 210 | 260 | µA | VREF = VDD = 5.5 V | 5 | ||
| Input Current (ADDRx, CLR, LDAC, POR) | IIN | -1 | 1 | µA | 5 | ||
| Input Current (SDA, SCL) | IIN | -1 | 1 | µA | 5 | ||
| Floating-State Leakage Current | -1 | 1 | µA | 6 | |||
| Output Low Voltage (SDA) | VOL | 0.4 | V | ISINK = 3 mA | 6 | ||
| Output Low Voltage (SDA) | VOL | 0.6 | V | ISINK = 6 mA | 6 | ||
| Normal mode supply current, VDD 4.5 V to 5.5 V | IDD | 1 | 1.16 | mA | VIH = VDD, VIL = GND, full-scale loaded; VDD = 4.5 V to 5.5 V | 6 | |
| Normal mode supply current, VDD 2.7 V to 3.6 V | IDD | 0.9 | 1.05 | mA | VIH = VDD, VIL = GND, full-scale loaded; VDD = 2.7 V to 3.6 V | 6 | |
| All power-down modes supply current (TSSOP) | IDD | 0.48 | 1 | µA | VDD = 3.6 V to 5.5 V; VIH = VDD, VIL = GND (TSSOP) | 6 | |
| VDD to GND | -0.3 | 7 | V | 10 | |||
| Operating Temperature Range, Industrial | -40 | 105 | °C | Industrial | 10 | ||
| Storage Temperature Range | -65 | 150 | °C | 10 | |||
| Junction Temperature (TJ maximum) | TJ | 150 | °C | 10 | |||
| θJA Thermal Impedance, TSSOP | θJA | 150.4 | °C/W | TSSOP | 10 |
CAD (KiCad official)
- Symbol:
AD5625BRUZ - Footprint:
Package_SO:TSSOP-14_4.4x5mm_P0.65mm - 3D model: TSSOP-14 (KiCad packages3D, STEP)
- 3D model files:
ad5625bruz-etched.step/ad5625bruz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad5625bruz.step/ad5625bruz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (35 pp, sha256
92ae60d05500e362, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).