main
Ray
Publish 0.1.0
cf02299
AD5321BRTZ-500RL7
Analog Devices · Digital To Analog Converters (DACs) · SOT-23-6
AD5321BRTZ-500RL7 from Analog Devices, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference point for all circuitry on the device. |
| 2 | SDA | bidirectional | Bidirectional open-drain serial data line that should be pulled to the supply with an external pull-up resistor, and may be CMOS/TTL driven when readback is not used. |
| 3 | SCL | input | Serial clock line used with SDA to clock data into the 16-bit input shift register at rates up to 400 kbps, and may be CMOS/TTL driven. |
| 4 | VOUT | output | Buffered analog output voltage from the DAC, with the output amplifier operating rail-to-rail. |
| 5 | A0 | input | Address input that sets the least significant bit of the 7-bit slave address. |
| 6 | VDD | power_in | Power supply input that can be operated from 2.5 V to 5.5 V and should be decoupled with a 10 μF capacitor in parallel with a 0.1 μF capacitor to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-6 |
| Category | ADC/DAC/Data Conversion |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 2.5 | 5.5 | V | IDD specification is valid for all DAC codes. | 4 | |
| Normal mode supply current, VDD = 4.5 V to 5.5 V | IDD | 150 | 250 | μA | DAC active and excluding load current; VIH = VDD and VIL = GND. | 4 | |
| Normal mode supply current, VDD = 2.5 V to 3.6 V | IDD | 120 | 220 | μA | DAC active and excluding load current; VIH = VDD and VIL = GND. | 4 | |
| Power-down mode supply current, VDD = 4.5 V to 5.5 V | IDD | 0.2 | 1 | μA | VIH = VDD and VIL = GND. | 4 | |
| Power-down mode supply current, VDD = 2.5 V to 3.6 V | IDD | 0.05 | 1 | μA | VIH = VDD and VIL = GND. | 4 | |
| Relative accuracy (INL), AD5321 | -16 | 2 | 16 | LSB | 3 | ||
| Differential nonlinearity (DNL), AD5321 | -0.8 | 0.3 | 0.8 | LSB | Guaranteed monotonic by design over all codes. | 3 | |
| Zero-code error, AD5321 | 5 | 20 | mV | All zeros loaded to DAC, see Figure 12. | 3 | ||
| Full-scale error, AD5321 | -1.25 | 0.15 | 1.25 | % of FSR | All ones loaded to DAC, see Figure 12. | 3 | |
| Gain error, AD5321 | -1 | 0.15 | 1 | % of FSR | 3 | ||
| Output voltage settling time, AD5321 | 8 | 10 | μs | VDD = 5 V; 1/4 scale to 3/4 scale change (0x400 to 0xC00). | 5 | ||
| SCL clock frequency | fSCL | 400 | kHz | 5 | |||
| SCL cycle time | t1 | 2.5 | μs | 5 | |||
| tHIGH, SCL high time | t2 | 0.6 | μs | 5 | |||
| tLOW, SCL low time | t3 | 1.3 | μs | 5 | |||
| tHD,STA, start/repeated start condition hold time | t4 | 0.6 | μs | 5 | |||
| tSU,DAT, data setup time | t5 | 100 | ns | 5 | |||
| tHD,DAT, data hold time | t6 | 0 | 0.9 | μs | 5 | ||
| tSU,STA, setup time for repeated start | t7 | 0.6 | μs | 5 | |||
| tSU,STO, stop condition setup time | t8 | 0.6 | μs | 5 | |||
| tBUF, bus free time between stop and start condition | t9 | 1.3 | μs | 5 | |||
| tR, rise time of both SCL and SDA when receiving | t10 | 0 | 300 | ns | Min 0 ns entry printed as 'May be CMOS driven'; tR and tF measured between 0.3 VDD and 0.7 VDD. | 5 | |
| tF, fall time of SDA when receiving | t11 | 250 | ns | tR and tF measured between 0.3 VDD and 0.7 VDD. | 5 | ||
| tF, fall time of both SCL and SDA when transmitting | t11 | 300 | ns | tR and tF measured between 0.3 VDD and 0.7 VDD. | 5 | ||
| Capacitive load for each bus line | Cb | 400 | pF | 5 | |||
| VDD to GND | VDD | -0.3 | 7 | V | 6 | ||
| SCL, SDA to GND | -0.3 | V | Maximum printed as VDD + 0.3 V. | 6 | |||
| PD, A1, A0 to GND | -0.3 | V | Maximum printed as VDD + 0.3 V. | 6 | |||
| VOUT to GND | VOUT | -0.3 | V | Maximum printed as VDD + 0.3 V. | 6 | ||
| Operating temperature range, industrial (B version) | -40 | 105 | °C | B Version | 6 | ||
| Storage temperature range | -65 | 150 | °C | 6 | |||
| Junction temperature (TJ max) | TJ | 150 | °C | 6 | |||
| Thermal impedance, junction to ambient, SOT-23 package | θJA | 229.6 | °C/W | SOT-23 package. | 6 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
AD5321BRTZ-500RL7 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ad5321brtz-500rl7-etched.step/ad5321brtz-500rl7-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad5321brtz-500rl7.step/ad5321brtz-500rl7.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
9adf50c9a9710f29, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
# AD5321BRTZ-500RL7
**Analog Devices** · Digital To Analog Converters (DACs) · SOT-23-6
AD5321BRTZ-500RL7 from Analog Devices, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference point for all circuitry on the device. |
| 2 | SDA | bidirectional | Bidirectional open-drain serial data line that should be pulled to the supply with an external pull-up resistor, and may be CMOS/TTL driven when readback is not used. |
| 3 | SCL | input | Serial clock line used with SDA to clock data into the 16-bit input shift register at rates up to 400 kbps, and may be CMOS/TTL driven. |
| 4 | VOUT | output | Buffered analog output voltage from the DAC, with the output amplifier operating rail-to-rail. |
| 5 | A0 | input | Address input that sets the least significant bit of the 7-bit slave address. |
| 6 | VDD | power_in | Power supply input that can be operated from 2.5 V to 5.5 V and should be decoupled with a 10 μF capacitor in parallel with a 0.1 μF capacitor to GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-6 |
| Category | ADC/DAC/Data Conversion |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VDD | 2.5 | | 5.5 | V | IDD specification is valid for all DAC codes. | 4 |
| Normal mode supply current, VDD = 4.5 V to 5.5 V | IDD | | 150 | 250 | μA | DAC active and excluding load current; VIH = VDD and VIL = GND. | 4 |
| Normal mode supply current, VDD = 2.5 V to 3.6 V | IDD | | 120 | 220 | μA | DAC active and excluding load current; VIH = VDD and VIL = GND. | 4 |
| Power-down mode supply current, VDD = 4.5 V to 5.5 V | IDD | | 0.2 | 1 | μA | VIH = VDD and VIL = GND. | 4 |
| Power-down mode supply current, VDD = 2.5 V to 3.6 V | IDD | | 0.05 | 1 | μA | VIH = VDD and VIL = GND. | 4 |
| Relative accuracy (INL), AD5321 | | -16 | 2 | 16 | LSB | | 3 |
| Differential nonlinearity (DNL), AD5321 | | -0.8 | 0.3 | 0.8 | LSB | Guaranteed monotonic by design over all codes. | 3 |
| Zero-code error, AD5321 | | | 5 | 20 | mV | All zeros loaded to DAC, see Figure 12. | 3 |
| Full-scale error, AD5321 | | -1.25 | 0.15 | 1.25 | % of FSR | All ones loaded to DAC, see Figure 12. | 3 |
| Gain error, AD5321 | | -1 | 0.15 | 1 | % of FSR | | 3 |
| Output voltage settling time, AD5321 | | | 8 | 10 | μs | VDD = 5 V; 1/4 scale to 3/4 scale change (0x400 to 0xC00). | 5 |
| SCL clock frequency | fSCL | | | 400 | kHz | | 5 |
| SCL cycle time | t1 | 2.5 | | | μs | | 5 |
| tHIGH, SCL high time | t2 | 0.6 | | | μs | | 5 |
| tLOW, SCL low time | t3 | 1.3 | | | μs | | 5 |
| tHD,STA, start/repeated start condition hold time | t4 | 0.6 | | | μs | | 5 |
| tSU,DAT, data setup time | t5 | 100 | | | ns | | 5 |
| tHD,DAT, data hold time | t6 | 0 | | 0.9 | μs | | 5 |
| tSU,STA, setup time for repeated start | t7 | 0.6 | | | μs | | 5 |
| tSU,STO, stop condition setup time | t8 | 0.6 | | | μs | | 5 |
| tBUF, bus free time between stop and start condition | t9 | 1.3 | | | μs | | 5 |
| tR, rise time of both SCL and SDA when receiving | t10 | 0 | | 300 | ns | Min 0 ns entry printed as 'May be CMOS driven'; tR and tF measured between 0.3 VDD and 0.7 VDD. | 5 |
| tF, fall time of SDA when receiving | t11 | | | 250 | ns | tR and tF measured between 0.3 VDD and 0.7 VDD. | 5 |
| tF, fall time of both SCL and SDA when transmitting | t11 | | | 300 | ns | tR and tF measured between 0.3 VDD and 0.7 VDD. | 5 |
| Capacitive load for each bus line | Cb | | | 400 | pF | | 5 |
| VDD to GND | VDD | -0.3 | | 7 | V | | 6 |
| SCL, SDA to GND | | -0.3 | | | V | Maximum printed as VDD + 0.3 V. | 6 |
| PD, A1, A0 to GND | | -0.3 | | | V | Maximum printed as VDD + 0.3 V. | 6 |
| VOUT to GND | VOUT | -0.3 | | | V | Maximum printed as VDD + 0.3 V. | 6 |
| Operating temperature range, industrial (B version) | | -40 | | 105 | °C | B Version | 6 |
| Storage temperature range | | -65 | | 150 | °C | | 6 |
| Junction temperature (TJ max) | TJ | | | 150 | °C | | 6 |
| Thermal impedance, junction to ambient, SOT-23 package | θJA | | 229.6 | | °C/W | SOT-23 package. | 6 |
## CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol: `AD5321BRTZ-500RL7`
- Footprint: `Package_TO_SOT_SMD:SOT-23-6`
- 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `ad5321brtz-500rl7-etched.step` / `ad5321brtz-500rl7-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ad5321brtz-500rl7.step` / `ad5321brtz-500rl7.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/AD5301_5311_5321.pdf) (24 pp, sha256 `9adf50c9a9710f29`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).
[Datasheet PDF](docs/ad5321brtz-500rl7-datasheet.pdf)