main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ad5321brtz-500rl7: viewers rendered from the public page · Ray
ad5321brtz-500rl7-etched.glb ad5321brtz-500rl7: factory component page (tier=mfr) · Ray
ad5321brtz-500rl7-etched.step ad5321brtz-500rl7: factory component page (tier=mfr) · Ray
ad5321brtz-500rl7-hero.glb ad5321brtz-500rl7: hero GLB from the etched model (keeps the MPN mark) · Ray
ad5321brtz-500rl7-hero.overlay.json ad5321brtz-500rl7: hero GLB from the etched model (keeps the MPN mark) · Ray
ad5321brtz-500rl7.glb Publish 0.1.0 · Ray
ad5321brtz-500rl7.kicad_mod Publish 0.1.0 · Ray
ad5321brtz-500rl7.kicad_sym Publish 0.1.0 · Ray
ad5321brtz-500rl7.lbr Publish 0.1.0 · Ray
ad5321brtz-500rl7.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 6 pins · Ray

AD5321BRTZ-500RL7

Analog Devices · Digital To Analog Converters (DACs) · SOT-23-6

AD5321BRTZ-500RL7 from Analog Devices, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 GND power_in Ground reference point for all circuitry on the device.
2 SDA bidirectional Bidirectional open-drain serial data line that should be pulled to the supply with an external pull-up resistor, and may be CMOS/TTL driven when readback is not used.
3 SCL input Serial clock line used with SDA to clock data into the 16-bit input shift register at rates up to 400 kbps, and may be CMOS/TTL driven.
4 VOUT output Buffered analog output voltage from the DAC, with the output amplifier operating rail-to-rail.
5 A0 input Address input that sets the least significant bit of the 7-bit slave address.
6 VDD power_in Power supply input that can be operated from 2.5 V to 5.5 V and should be decoupled with a 10 μF capacitor in parallel with a 0.1 μF capacitor to GND.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOT-23-6
Category ADC/DAC/Data Conversion
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD 2.5 5.5 V IDD specification is valid for all DAC codes. 4
Normal mode supply current, VDD = 4.5 V to 5.5 V IDD 150 250 μA DAC active and excluding load current; VIH = VDD and VIL = GND. 4
Normal mode supply current, VDD = 2.5 V to 3.6 V IDD 120 220 μA DAC active and excluding load current; VIH = VDD and VIL = GND. 4
Power-down mode supply current, VDD = 4.5 V to 5.5 V IDD 0.2 1 μA VIH = VDD and VIL = GND. 4
Power-down mode supply current, VDD = 2.5 V to 3.6 V IDD 0.05 1 μA VIH = VDD and VIL = GND. 4
Relative accuracy (INL), AD5321 -16 2 16 LSB 3
Differential nonlinearity (DNL), AD5321 -0.8 0.3 0.8 LSB Guaranteed monotonic by design over all codes. 3
Zero-code error, AD5321 5 20 mV All zeros loaded to DAC, see Figure 12. 3
Full-scale error, AD5321 -1.25 0.15 1.25 % of FSR All ones loaded to DAC, see Figure 12. 3
Gain error, AD5321 -1 0.15 1 % of FSR 3
Output voltage settling time, AD5321 8 10 μs VDD = 5 V; 1/4 scale to 3/4 scale change (0x400 to 0xC00). 5
SCL clock frequency fSCL 400 kHz 5
SCL cycle time t1 2.5 μs 5
tHIGH, SCL high time t2 0.6 μs 5
tLOW, SCL low time t3 1.3 μs 5
tHD,STA, start/repeated start condition hold time t4 0.6 μs 5
tSU,DAT, data setup time t5 100 ns 5
tHD,DAT, data hold time t6 0 0.9 μs 5
tSU,STA, setup time for repeated start t7 0.6 μs 5
tSU,STO, stop condition setup time t8 0.6 μs 5
tBUF, bus free time between stop and start condition t9 1.3 μs 5
tR, rise time of both SCL and SDA when receiving t10 0 300 ns Min 0 ns entry printed as 'May be CMOS driven'; tR and tF measured between 0.3 VDD and 0.7 VDD. 5
tF, fall time of SDA when receiving t11 250 ns tR and tF measured between 0.3 VDD and 0.7 VDD. 5
tF, fall time of both SCL and SDA when transmitting t11 300 ns tR and tF measured between 0.3 VDD and 0.7 VDD. 5
Capacitive load for each bus line Cb 400 pF 5
VDD to GND VDD -0.3 7 V 6
SCL, SDA to GND -0.3 V Maximum printed as VDD + 0.3 V. 6
PD, A1, A0 to GND -0.3 V Maximum printed as VDD + 0.3 V. 6
VOUT to GND VOUT -0.3 V Maximum printed as VDD + 0.3 V. 6
Operating temperature range, industrial (B version) -40 105 °C B Version 6
Storage temperature range -65 150 °C 6
Junction temperature (TJ max) TJ 150 °C 6
Thermal impedance, junction to ambient, SOT-23 package θJA 229.6 °C/W SOT-23 package. 6

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: AD5321BRTZ-500RL7
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ad5321brtz-500rl7-etched.step / ad5321brtz-500rl7-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad5321brtz-500rl7.step / ad5321brtz-500rl7.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (24 pp, sha256 9adf50c9a9710f29, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF