main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ad5311brtz: viewers · Ray
ad5311brtz-etched.glb ad5311brtz: factory component page (tier=mfr) · Ray
ad5311brtz-etched.step ad5311brtz: factory component page (tier=mfr) · Ray
ad5311brtz-hero.glb ad5311brtz: hero GLB from the etched model (keeps the MPN mark) · Ray
ad5311brtz-hero.overlay.json ad5311brtz: hero GLB from the etched model (keeps the MPN mark) · Ray
ad5311brtz.glb Publish 0.1.0 · Ray
ad5311brtz.kicad_mod Publish 0.1.0 · Ray
ad5311brtz.kicad_sym Publish 0.1.0 · Ray
ad5311brtz.lbr Publish 0.1.0 · Ray
ad5311brtz.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 6 pins · Ray

AD5311BRTZ-REEL7

Analog Devices · Digital To Analog Converters (DACs) · SOT-23-6

AD5311BRTZ-REEL7 from Analog Devices, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 GND power_in Ground reference point for all circuitry on the device.
2 SDA bidirectional Serial data line, bidirectional open-drain, clocks data into the 16-bit input shift register during write and reads back two bytes during read; needs an external pull-up resistor to the supply.
3 SCL input Serial clock line used with SDA to clock data into the 16-bit input shift register, supporting clock rates up to 400 kbps and may be CMOS/TTL driven.
4 VOUT output Buffered analog output voltage from the DAC with rail-to-rail output amplifier operation.
5 A0 input Address input that sets the least significant bit of the 7-bit slave address.
6 VDD power_in Power supply input operating from 2.5 V to 5.5 V, to be decoupled with a 10 μF in parallel with a 0.1 μF capacitor to GND.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOT-23-6
Category ADC/DAC/Data Conversion
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Relative Accuracy (AD5311) INL -4 0.5 4 LSB 3
Differential Nonlinearity (AD5311) DNL -0.5 0.05 0.5 LSB Guaranteed monotonic by design over all codes. 3
Zero-Code Error 5 20 mV All zeros loaded to DAC, see Figure 12. 3
Full-Scale Error -1.25 0.15 1.25 % of FSR All ones loaded to DAC, see Figure 12. 3
Gain Error -1 0.15 1 % of FSR 3
Input Current (A0, A1, PD) -1 1 μA 3
Input Low Voltage, VIL (A0, A1, PD) VIL 0.8 V VDD = 5 V ± 10%. 3
Input Low Voltage, VIL (A0, A1, PD) VIL 0.6 V VDD = 3 V ± 10%. 3
Input Low Voltage, VIL (A0, A1, PD) VIL 0.5 V VDD = 2.5 V. 3
Input High Voltage, VIH (A0, A1, PD) VIH 2.4 V VDD = 5 V ± 10%. 3
Input High Voltage, VIH (A0, A1, PD) VIH 2.1 V VDD = 3 V ± 10%. 3
Input High Voltage, VIH (A0, A1, PD) VIH 2 V VDD = 2.5 V. 3
Input Low Voltage, VIL (SCL, SDA) VIL -0.3 V Max is +0.3 × VDD 3
Input Leakage Current (SCL, SDA) IIN -1 1 μA VIN = 0 V to VDD. 3
Output Low Voltage (SDA) VOL 0.4 V ISINK = 3 mA. 4
Output Low Voltage (SDA) VOL 0.6 V ISINK = 6 mA. 4
Three-State Leakage Current -1 1 μA 4
Supply Voltage VDD 2.5 5.5 V IDD specification is valid for all DAC codes. 4
IDD (Normal Mode) IDD 150 250 μA VDD = 4.5 V to 5.5 V; VIH = VDD and VIL = GND; DAC active and excluding load current. 4
IDD (Normal Mode) IDD 120 220 μA VDD = 2.5 V to 3.6 V; VIH = VDD and VIL = GND; DAC active and excluding load current. 4
IDD (Power-Down Mode) IDD 0.2 1 μA VDD = 4.5 V to 5.5 V; VIH = VDD and VIL = GND. 4
IDD (Power-Down Mode) IDD 0.05 1 μA VDD = 2.5 V to 3.6 V; VIH = VDD and VIL = GND. 4
Output Voltage Settling Time (AD5311) 7 9 μs VDD = 5 V; 1/4 scale to 3/4 scale change (0x100 to 0x300) 5
SCL clock frequency fSCL 400 kHz 5
SCL cycle time t1 2.5 μs 5
SCL high time t2 0.6 μs tHIGH 5
SCL low time t3 1.3 μs tLOW 5
Start/repeated start condition hold time t4 0.6 μs tHD,STA 5
Data setup time t5 100 ns tSU,DAT 5
Data hold time t6 0 0.9 μs tHD,DAT 5
Setup time for repeated start t7 0.6 μs tSU,STA 5
Stop condition setup time t8 0.6 μs tSU,STO 5
Bus free time between stop and start t9 1.3 μs tBUF 5
Rise time of SCL and SDA when receiving t10 0 300 ns tR; May be CMOS driven 5
Fall time of SDA when receiving t11 250 ns tF 5
Fall time of SCL and SDA when transmitting t11 300 ns tF 5
Capacitive load for each bus line Cb 400 pF 5
VDD to GND VDD -0.3 7 V TA = 25°C 6
SCL, SDA to GND -0.3 V Max is VDD + 0.3 V 6
VOUT to GND VOUT -0.3 V Max is VDD + 0.3 V 6
Operating Temperature Range, Industrial (B Version) -40 105 °C 6
Storage Temperature Range -65 150 °C 6
Junction Temperature TJ max 150 °C 6
Thermal Impedance, SOT-23 Package θJA 229.6 °C/W SOT-23 Package 6
Zero-Code Error Drift -20 μV/°C 3
Gain Error Drift -5 ppm of FSR/°C 3
DC Output Impedance 1 Ω 3
Short-Circuit Current 50 mA VDD = 5 V. 3
Short-Circuit Current 20 mA VDD = 3 V. 3
Power-Up Time 2.5 μs Coming out of power-down mode. VDD = 5 V. 3
Power-Up Time 6 μs Coming out of power-down mode. VDD = 3 V. 3
Pin Capacitance (A0, A1, PD) 3 pF 3
Input Capacitance (SCL, SDA) CIN 6 pF 3
Slew Rate 0.7 V/μs 5
Major-Code Change Glitch Impulse 12 nV-s 1 LSB change around major carry 5
Digital Feedthrough 0.3 nV-s 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: AD5311BRTZ-REEL7
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ad5311brtz-etched.step / ad5311brtz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad5311brtz.step / ad5311brtz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (24 pp, sha256 9adf50c9a9710f29, retrieved 2026-11-16, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF