3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownAD5311BRTZ-REEL7
Analog Devices · Digital To Analog Converters (DACs) · SOT-23-6
AD5311BRTZ-REEL7 from Analog Devices, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference point for all circuitry on the device. |
| 2 | SDA | bidirectional | Serial data line, bidirectional open-drain, clocks data into the 16-bit input shift register during write and reads back two bytes during read; needs an external pull-up resistor to the supply. |
| 3 | SCL | input | Serial clock line used with SDA to clock data into the 16-bit input shift register, supporting clock rates up to 400 kbps and may be CMOS/TTL driven. |
| 4 | VOUT | output | Buffered analog output voltage from the DAC with rail-to-rail output amplifier operation. |
| 5 | A0 | input | Address input that sets the least significant bit of the 7-bit slave address. |
| 6 | VDD | power_in | Power supply input operating from 2.5 V to 5.5 V, to be decoupled with a 10 μF in parallel with a 0.1 μF capacitor to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-6 |
| Category | ADC/DAC/Data Conversion |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Relative Accuracy (AD5311) | INL | -4 | 0.5 | 4 | LSB | 3 | |
| Differential Nonlinearity (AD5311) | DNL | -0.5 | 0.05 | 0.5 | LSB | Guaranteed monotonic by design over all codes. | 3 |
| Zero-Code Error | 5 | 20 | mV | All zeros loaded to DAC, see Figure 12. | 3 | ||
| Full-Scale Error | -1.25 | 0.15 | 1.25 | % of FSR | All ones loaded to DAC, see Figure 12. | 3 | |
| Gain Error | -1 | 0.15 | 1 | % of FSR | 3 | ||
| Input Current (A0, A1, PD) | -1 | 1 | μA | 3 | |||
| Input Low Voltage, VIL (A0, A1, PD) | VIL | 0.8 | V | VDD = 5 V ± 10%. | 3 | ||
| Input Low Voltage, VIL (A0, A1, PD) | VIL | 0.6 | V | VDD = 3 V ± 10%. | 3 | ||
| Input Low Voltage, VIL (A0, A1, PD) | VIL | 0.5 | V | VDD = 2.5 V. | 3 | ||
| Input High Voltage, VIH (A0, A1, PD) | VIH | 2.4 | V | VDD = 5 V ± 10%. | 3 | ||
| Input High Voltage, VIH (A0, A1, PD) | VIH | 2.1 | V | VDD = 3 V ± 10%. | 3 | ||
| Input High Voltage, VIH (A0, A1, PD) | VIH | 2 | V | VDD = 2.5 V. | 3 | ||
| Input Low Voltage, VIL (SCL, SDA) | VIL | -0.3 | V | Max is +0.3 × VDD | 3 | ||
| Input Leakage Current (SCL, SDA) | IIN | -1 | 1 | μA | VIN = 0 V to VDD. | 3 | |
| Output Low Voltage (SDA) | VOL | 0.4 | V | ISINK = 3 mA. | 4 | ||
| Output Low Voltage (SDA) | VOL | 0.6 | V | ISINK = 6 mA. | 4 | ||
| Three-State Leakage Current | -1 | 1 | μA | 4 | |||
| Supply Voltage | VDD | 2.5 | 5.5 | V | IDD specification is valid for all DAC codes. | 4 | |
| IDD (Normal Mode) | IDD | 150 | 250 | μA | VDD = 4.5 V to 5.5 V; VIH = VDD and VIL = GND; DAC active and excluding load current. | 4 | |
| IDD (Normal Mode) | IDD | 120 | 220 | μA | VDD = 2.5 V to 3.6 V; VIH = VDD and VIL = GND; DAC active and excluding load current. | 4 | |
| IDD (Power-Down Mode) | IDD | 0.2 | 1 | μA | VDD = 4.5 V to 5.5 V; VIH = VDD and VIL = GND. | 4 | |
| IDD (Power-Down Mode) | IDD | 0.05 | 1 | μA | VDD = 2.5 V to 3.6 V; VIH = VDD and VIL = GND. | 4 | |
| Output Voltage Settling Time (AD5311) | 7 | 9 | μs | VDD = 5 V; 1/4 scale to 3/4 scale change (0x100 to 0x300) | 5 | ||
| SCL clock frequency | fSCL | 400 | kHz | 5 | |||
| SCL cycle time | t1 | 2.5 | μs | 5 | |||
| SCL high time | t2 | 0.6 | μs | tHIGH | 5 | ||
| SCL low time | t3 | 1.3 | μs | tLOW | 5 | ||
| Start/repeated start condition hold time | t4 | 0.6 | μs | tHD,STA | 5 | ||
| Data setup time | t5 | 100 | ns | tSU,DAT | 5 | ||
| Data hold time | t6 | 0 | 0.9 | μs | tHD,DAT | 5 | |
| Setup time for repeated start | t7 | 0.6 | μs | tSU,STA | 5 | ||
| Stop condition setup time | t8 | 0.6 | μs | tSU,STO | 5 | ||
| Bus free time between stop and start | t9 | 1.3 | μs | tBUF | 5 | ||
| Rise time of SCL and SDA when receiving | t10 | 0 | 300 | ns | tR; May be CMOS driven | 5 | |
| Fall time of SDA when receiving | t11 | 250 | ns | tF | 5 | ||
| Fall time of SCL and SDA when transmitting | t11 | 300 | ns | tF | 5 | ||
| Capacitive load for each bus line | Cb | 400 | pF | 5 | |||
| VDD to GND | VDD | -0.3 | 7 | V | TA = 25°C | 6 | |
| SCL, SDA to GND | -0.3 | V | Max is VDD + 0.3 V | 6 | |||
| VOUT to GND | VOUT | -0.3 | V | Max is VDD + 0.3 V | 6 | ||
| Operating Temperature Range, Industrial (B Version) | -40 | 105 | °C | 6 | |||
| Storage Temperature Range | -65 | 150 | °C | 6 | |||
| Junction Temperature | TJ max | 150 | °C | 6 | |||
| Thermal Impedance, SOT-23 Package | θJA | 229.6 | °C/W | SOT-23 Package | 6 | ||
| Zero-Code Error Drift | -20 | μV/°C | 3 | ||||
| Gain Error Drift | -5 | ppm of FSR/°C | 3 | ||||
| DC Output Impedance | 1 | Ω | 3 | ||||
| Short-Circuit Current | 50 | mA | VDD = 5 V. | 3 | |||
| Short-Circuit Current | 20 | mA | VDD = 3 V. | 3 | |||
| Power-Up Time | 2.5 | μs | Coming out of power-down mode. VDD = 5 V. | 3 | |||
| Power-Up Time | 6 | μs | Coming out of power-down mode. VDD = 3 V. | 3 | |||
| Pin Capacitance (A0, A1, PD) | 3 | pF | 3 | ||||
| Input Capacitance (SCL, SDA) | CIN | 6 | pF | 3 | |||
| Slew Rate | 0.7 | V/μs | 5 | ||||
| Major-Code Change Glitch Impulse | 12 | nV-s | 1 LSB change around major carry | 5 | |||
| Digital Feedthrough | 0.3 | nV-s | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
AD5311BRTZ-REEL7 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ad5311brtz-etched.step/ad5311brtz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad5311brtz.step/ad5311brtz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
9adf50c9a9710f29, retrieved 2026-11-16, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).