main
Ray Publish 0.1.0 d3a134e

ACS733KLATR-65AB-T

Allegro MicroSystems, LLC · Current Sensors · SOIC-16-300mil

ACS733KLATR-65AB-T from Allegro MicroSystems, LLC, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IP+ passive Positive terminal for the current being sensed; fused internally.
2 IP+ passive Positive terminal for the current being sensed; fused internally.
3 IP+ passive Positive terminal for the current being sensed; fused internally.
4 IP+ passive Positive terminal for the current being sensed; fused internally.
5 IP- passive Negative terminal for the current being sensed; fused internally.
6 IP- passive Negative terminal for the current being sensed; fused internally.
7 IP- passive Negative terminal for the current being sensed; fused internally.
8 IP- passive Negative terminal for the current being sensed; fused internally.
9 GND power_in Device ground terminal.
10 GND power_in Device ground terminal.
11 PROGRAM input Programming input pin for factory calibration; connect to ground for best ESD performance.
12 VIOUT output Analog output signal that changes proportionally with the bidirectional AC or DC primary sensed current.
13 FAULT output Overcurrent fault output; open drain, with pull-up resistor RF(PULLUP) of 10 to 500 kΩ.
14 VOC input Sets the overcurrent fault threshold via an external resistor divider on this pin; VVOC range 0.1 × VCC to 0.4 × VCC.
15 VCC power_in Device power supply terminal; nominal 3.3 V for ACS733 (3.14 V to 3.46 V).
16 VCC power_in Device power supply terminal; nominal 3.3 V for ACS733 (3.14 V to 3.46 V).

Key specifications

Parameter Value
Manufacturer Allegro MicroSystems, LLC
Package SOIC-16-300mil
Category Sensors
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Current Sensing Range IPR -65 65 A 17
Total Output Error, IP=IPR(max), TA=25°C ETOT -3.5 1.8 3.5 % IP = IPR(max), TA = 25°C 17
Total Output Error, IP=IPR(max), TA=125°C ETOT -3 1.4 3 % IP = IPR(max), TA = 125°C 17
Total Output Error, IP=IPR(max), TA=-40°C ETOT -6 4 6 % IP = IPR(max), TA = -40°C 17
Sensitivity Error, IP=IPR(max)/2, TA=25°C ESENS -2.5 1.6 2.5 % IP = IPR(max) / 2, TA = 25°C 17
Sensitivity Error, IP=IPR(max)/2, TA=125°C ESENS -2.5 1.6 2.5 % IP = IPR(max) / 2, TA = 125°C 17
Sensitivity Error, IP=IPR(max)/2, TA=-40°C ESENS -4.5 3.1 4.5 % IP = IPR(max) / 2, TA = -40°C 17
Voltage Offset Error, TA=25°C VOE -30 17 30 mV IP = 0 A, TA = 25°C 17
Voltage Offset Error, TA=125°C VOE -25 7 25 mV IP = 0 A, TA = 125°C 17
Voltage Offset Error, TA=-40°C VOE -70 31 70 mV IP = 0 A, TA = -40°C 17
Linearity Error, TA=25°C, up to full-scale IP ELIN -1.7 1.1 1.7 % TA = 25°C, up to full-scale IP 17
Supply Voltage VCC 3.14 3.3 3.46 V 6
Supply Current ICC 20 35 mA ACS733; VCC = 3.3 V 6
Bypass Capacitor CBYPASS 0.1 µF VCC to GND 6
Output Capacitance Load CL 220 pF VIOUT to GND 6
Output Resistive Load RL 50 kΩ VIOUT to GND 6
Output Saturation Voltage VSAT(LOW) VSAT(LOW) 0.3 V VCC = 3.3 V, TA = 25°C, RL(PULLDOWN) = 50 kΩ to VCC 6
Zero Current Output Ratiometry Error ERAT(Q) -12 10 12 mV TA = 25°C, VCC = ±5 % variation of nominal supply voltage 6
Sensitivity Ratiometry Error ERAT(SENS) -2 1.72 2 % TA = 25°C, VCC = ±5 % variation of nominal supply voltage 6
FAULT Response Time tRESPONSE(F) 0.2 0.5 0.75 μs Time from IP > IFAULT to FAULT pulled below VFAULT; input current step from 0 to 1.2 × IFAULT 7
FAULT Release Time tC(F) 0.1 0.45 µs Time from IP below IFAULT, IHYS to VFAULT above VFAULTL; 100 pF from FAULT to ground 7
FAULT Output Low Voltage VFAULT 0.4 V In fault condition; RF(PULLUP) = 10 kΩ 7
FAULT Pull-Up Resistance RF(PULLUP) 10 500 kΩ 7
VOC Input Current IVOC 10 100 nA 7
Supply Voltage (absolute maximum) VCC 6 V 3
Reverse Supply Voltage VRCC -0.1 V 3
Output Voltage VIOUT 6 V 3
Reverse Output Voltage VRIOUT -0.1 V 3
Fault Output Voltage (absolute maximum) VFAULT 6 V 3
Reverse Fault Output Voltage VRFAULT -0.1 V 3
Forward VOC Voltage VVOC 6 V 3
Reverse VOC Voltage VVOC -0.1 V 3
Output Current IOUT 15 mA Maximum survivable sink or source current on the output 3
Maximum Continuous Current ICMAX 55 A TA = 25°C 3
Maximum Junction Temperature TJ(max) 165 °C 3
Storage Temperature Tstg -65 170 °C 3
Nominal Operating Ambient Temperature TA -40 125 °C Range K 3
Human Body Model ESD VHBM -12 12 kV Per AEC-Q100 3
Charged Device Model ESD VCDM -1 1 kV Per AEC-Q100 3
Junction-to-Ambient Thermal Resistance RθJA 17 °C/W Mounted on the Allegro ASEK732/3 evaluation board 3
Junction-to-Lead Thermal Resistance RθJL 5 °C/W Mounted on the Allegro ASEK732/3 evaluation board 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin with 100% matte tin, which is compatible with standard lead (Pb) free printed circuit board assembly processes. Internally, the device 2

CAD (KiCad official)

  • Symbol: ACS733KLATR-65AB-T
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: acs733klatr-65ab-t-etched.step / acs733klatr-65ab-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); acs733klatr-65ab-t.step / acs733klatr-65ab-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Allegro MicroSystems, LLC datasheet (27 pp, sha256 f9374b1e7e3d0f4f, retrieved 2026-11-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF