3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownACS733KLATR-65AB-T
Allegro MicroSystems, LLC · Current Sensors · SOIC-16-300mil
ACS733KLATR-65AB-T from Allegro MicroSystems, LLC, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Positive terminal for the current being sensed; fused internally. |
| 2 | IP+ | passive | Positive terminal for the current being sensed; fused internally. |
| 3 | IP+ | passive | Positive terminal for the current being sensed; fused internally. |
| 4 | IP+ | passive | Positive terminal for the current being sensed; fused internally. |
| 5 | IP- | passive | Negative terminal for the current being sensed; fused internally. |
| 6 | IP- | passive | Negative terminal for the current being sensed; fused internally. |
| 7 | IP- | passive | Negative terminal for the current being sensed; fused internally. |
| 8 | IP- | passive | Negative terminal for the current being sensed; fused internally. |
| 9 | GND | power_in | Device ground terminal. |
| 10 | GND | power_in | Device ground terminal. |
| 11 | PROGRAM | input | Programming input pin for factory calibration; connect to ground for best ESD performance. |
| 12 | VIOUT | output | Analog output signal that changes proportionally with the bidirectional AC or DC primary sensed current. |
| 13 | FAULT | output | Overcurrent fault output; open drain, with pull-up resistor RF(PULLUP) of 10 to 500 kΩ. |
| 14 | VOC | input | Sets the overcurrent fault threshold via an external resistor divider on this pin; VVOC range 0.1 × VCC to 0.4 × VCC. |
| 15 | VCC | power_in | Device power supply terminal; nominal 3.3 V for ACS733 (3.14 V to 3.46 V). |
| 16 | VCC | power_in | Device power supply terminal; nominal 3.3 V for ACS733 (3.14 V to 3.46 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allegro MicroSystems, LLC |
| Package | SOIC-16-300mil |
| Category | Sensors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Current Sensing Range | IPR | -65 | 65 | A | 17 | ||
| Total Output Error, IP=IPR(max), TA=25°C | ETOT | -3.5 | 1.8 | 3.5 | % | IP = IPR(max), TA = 25°C | 17 |
| Total Output Error, IP=IPR(max), TA=125°C | ETOT | -3 | 1.4 | 3 | % | IP = IPR(max), TA = 125°C | 17 |
| Total Output Error, IP=IPR(max), TA=-40°C | ETOT | -6 | 4 | 6 | % | IP = IPR(max), TA = -40°C | 17 |
| Sensitivity Error, IP=IPR(max)/2, TA=25°C | ESENS | -2.5 | 1.6 | 2.5 | % | IP = IPR(max) / 2, TA = 25°C | 17 |
| Sensitivity Error, IP=IPR(max)/2, TA=125°C | ESENS | -2.5 | 1.6 | 2.5 | % | IP = IPR(max) / 2, TA = 125°C | 17 |
| Sensitivity Error, IP=IPR(max)/2, TA=-40°C | ESENS | -4.5 | 3.1 | 4.5 | % | IP = IPR(max) / 2, TA = -40°C | 17 |
| Voltage Offset Error, TA=25°C | VOE | -30 | 17 | 30 | mV | IP = 0 A, TA = 25°C | 17 |
| Voltage Offset Error, TA=125°C | VOE | -25 | 7 | 25 | mV | IP = 0 A, TA = 125°C | 17 |
| Voltage Offset Error, TA=-40°C | VOE | -70 | 31 | 70 | mV | IP = 0 A, TA = -40°C | 17 |
| Linearity Error, TA=25°C, up to full-scale IP | ELIN | -1.7 | 1.1 | 1.7 | % | TA = 25°C, up to full-scale IP | 17 |
| Supply Voltage | VCC | 3.14 | 3.3 | 3.46 | V | 6 | |
| Supply Current | ICC | 20 | 35 | mA | ACS733; VCC = 3.3 V | 6 | |
| Bypass Capacitor | CBYPASS | 0.1 | µF | VCC to GND | 6 | ||
| Output Capacitance Load | CL | 220 | pF | VIOUT to GND | 6 | ||
| Output Resistive Load | RL | 50 | kΩ | VIOUT to GND | 6 | ||
| Output Saturation Voltage VSAT(LOW) | VSAT(LOW) | 0.3 | V | VCC = 3.3 V, TA = 25°C, RL(PULLDOWN) = 50 kΩ to VCC | 6 | ||
| Zero Current Output Ratiometry Error | ERAT(Q) | -12 | 10 | 12 | mV | TA = 25°C, VCC = ±5 % variation of nominal supply voltage | 6 |
| Sensitivity Ratiometry Error | ERAT(SENS) | -2 | 1.72 | 2 | % | TA = 25°C, VCC = ±5 % variation of nominal supply voltage | 6 |
| FAULT Response Time | tRESPONSE(F) | 0.2 | 0.5 | 0.75 | μs | Time from IP > IFAULT to FAULT pulled below VFAULT; input current step from 0 to 1.2 × IFAULT | 7 |
| FAULT Release Time | tC(F) | 0.1 | 0.45 | µs | Time from IP below IFAULT, IHYS to VFAULT above VFAULTL; 100 pF from FAULT to ground | 7 | |
| FAULT Output Low Voltage | VFAULT | 0.4 | V | In fault condition; RF(PULLUP) = 10 kΩ | 7 | ||
| FAULT Pull-Up Resistance | RF(PULLUP) | 10 | 500 | kΩ | 7 | ||
| VOC Input Current | IVOC | 10 | 100 | nA | 7 | ||
| Supply Voltage (absolute maximum) | VCC | 6 | V | 3 | |||
| Reverse Supply Voltage | VRCC | -0.1 | V | 3 | |||
| Output Voltage | VIOUT | 6 | V | 3 | |||
| Reverse Output Voltage | VRIOUT | -0.1 | V | 3 | |||
| Fault Output Voltage (absolute maximum) | VFAULT | 6 | V | 3 | |||
| Reverse Fault Output Voltage | VRFAULT | -0.1 | V | 3 | |||
| Forward VOC Voltage | VVOC | 6 | V | 3 | |||
| Reverse VOC Voltage | VVOC | -0.1 | V | 3 | |||
| Output Current | IOUT | 15 | mA | Maximum survivable sink or source current on the output | 3 | ||
| Maximum Continuous Current | ICMAX | 55 | A | TA = 25°C | 3 | ||
| Maximum Junction Temperature | TJ(max) | 165 | °C | 3 | |||
| Storage Temperature | Tstg | -65 | 170 | °C | 3 | ||
| Nominal Operating Ambient Temperature | TA | -40 | 125 | °C | Range K | 3 | |
| Human Body Model ESD | VHBM | -12 | 12 | kV | Per AEC-Q100 | 3 | |
| Charged Device Model ESD | VCDM | -1 | 1 | kV | Per AEC-Q100 | 3 | |
| Junction-to-Ambient Thermal Resistance | RθJA | 17 | °C/W | Mounted on the Allegro ASEK732/3 evaluation board | 3 | ||
| Junction-to-Lead Thermal Resistance | RθJL | 5 | °C/W | Mounted on the Allegro ASEK732/3 evaluation board | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | with 100% matte tin, which is compatible with standard lead (Pb) free printed circuit board assembly processes. Internally, the device | 2 |
CAD (KiCad official)
- Symbol:
ACS733KLATR-65AB-T - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
acs733klatr-65ab-t-etched.step/acs733klatr-65ab-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);acs733klatr-65ab-t.step/acs733klatr-65ab-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Allegro MicroSystems, LLC datasheet (27 pp, sha256
f9374b1e7e3d0f4f, retrieved 2026-11-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).