main
Ray Publish 0.1.3 9ba274e

ACS730KLCTR-65AB-T

Allegro MicroSystems, LLC · Current Sensors · SOIC-8

ACS730KLCTR-65AB-T from Allegro MicroSystems, LLC, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IP+ passive Terminal for the current being sensed; fused internally, and electrically isolated from the sensor leads (pins 5 through 8).
2 IP+ passive Terminal for the current being sensed; fused internally, and electrically isolated from the sensor leads (pins 5 through 8).
3 IP- passive Terminal for the current being sensed; fused internally, and electrically isolated from the sensor leads (pins 5 through 8).
4 IP- passive Terminal for the current being sensed; fused internally, and electrically isolated from the sensor leads (pins 5 through 8).
5 GND power_in Signal ground terminal for the sensor IC.
6 VZCR output Zero current reference; outputs a DC voltage equal to VIOUT at IP = 0 A.
7 VIOUT output Analog output signal that varies linearly with the bidirectional sensed primary current, with a 2.5 V quiescent level for the 65 A part.
8 VCC power_in Device power supply terminal; operates from 4.5 V to 5.5 V (5 V typical) with a supply current of 17 mA typical and 25 mA maximum at VCC = 5 V, output open.

Key specifications

Parameter Value
Manufacturer Allegro MicroSystems, LLC
Package SOIC-8
Category Magnetic Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC 4.5 5 5.5 V 5
Supply Current ICC 17 25 mA VCC = 5 V, output open 5
Output Capacitance Load CL 0.47 nF VIOUT to GND 5
Reference Capacitance Load CVZCR 1 nF VZCR to GND 5
Output Resistive Load RL 10 kΩ VIOUT to GND, VIOUT to VCC 5
Reference Resistive Load RVZCR 10 kΩ VZCR to GND, VZCR to VCC 5
Output Low Saturation Voltage VOL 0.1 0.2 V VIOUT, TA = 25°C 5
Zero Current Reference Offset Voltage VZCR(ofs) -10 3 10 mV TA = 25°C 5
Zero Current Reference Offset Voltage VZCR(ofs) -20 10 20 mV TA = 25°C to 125°C 5
Current Sensing Range IPR -65 65 A 11
Total Output Error ETOT -5 3 5 % IP = IP(MAX); TA = 25°C to 125°C 11
Sensitivity Error Esens -3.5 3 3.5 % IP = IP(MAX); TA = 25°C to 125°C 11
Offset Voltage VOE -40 20 40 mV IP = 0 A; TA = 25°C to 125°C 11
Nonlinearity ELIN -2 0.75 2 % Through the full range of IP; TA = 25°C to 125°C 11
Supply Voltage (absolute maximum) VCC 6 V 3
Reverse Supply Voltage VCC(R) -0.1 V 3
Output Voltage VIOUT 6 V 3
Reverse Output Voltage VIOUT(R) -0.1 V 3
Zero Current Reference Voltage VZCR 20 V 3
Reverse Zero Current Reference Voltage VZCR(R) -0.1 V 3
Operating Ambient Temperature Range K TA -40 125 °C 3
Junction Temperature TJ(max) 165 °C 3
Storage Temperature Tstg -65 170 °C 3
Power-On Time tPO 150 μs TA = 25°C 5
Primary Conductor Resistance RIP 1.2 mΩ TA = 25°C 5
Primary Conductor Inductance LIP 2 nH TA = 25°C 5
Magnetic Coupling Factor MCF 10 G/A TA = 25°C 5
Rise Time tr 0.6 μs TA = 25°C, CL = 0.47 nF 5
Propagation Delay tpd 0.2 µs TA = 25°C, CL = 0.47 nF 5
Response Time tRESPONSE 0.7 μs TA = 25°C, CL = 0.47 nF 5
Output Slew Rate SR 2.67 V/µs TA = 25°C, CL = 1 nF 5
Internal Bandwidth BW 1 MHz Small signal -3 dB; CL = 0.47 nF 5
Noise Density IND 40 µA/√(Hz) Input-referenced noise density; TA = 25°C, CL = 0.47 nF 5
Noise IN 40 mARMS Input-referenced noise; TA = 25°C, CL = 0.47 nF 5
Power Supply Rejection Ratio PSRR 35 dB 0 to 200 Hz, 100 mV pk-pk ripple on VCC, IP = 0 A, VIOUT and VZCR 5
Sensitivity Power Supply Rejection Ratio SPSRR 15 dB DC, VCC(min) < VCC < VCC(max), IP = IPR(max) 5
Offset Power Supply Rejection Ratio OPSRR 30 dB DC, VCC(min) < VCC < VCC(max) 5
Output Source Current IOUT(src) 5.5 mA VIOUT shorted to GND 5
Output Sink Current IOUT(snk) 3 mA VIOUT shorted to VCC 5
Zero Current Reference Offset Voltage VZCR(ofs) 10 mV TA = -40°C to 25°C 5
Reference Source Current IVZCR(src) 2 mA VZCR shorted to GND 5
Reference Sink Current IVZCR(snk) 14 mA VZCR shorted to VCC 5
Sensitivity Sens 30 mV/A 11
Zero Current Output Voltage VIOUT(Q) 2.5 V IP = 0 A, TA = 25°C 11
Zero Current Reference Voltage VZCR 2.5 V TA = 25°C 11
Total Output Error ETOT 5 % IP = IP(MAX); TA = -40°C to 25°C 11
Sensitivity Error Esens 5 % IP = IP(MAX); TA = -40°C to 25°C 11
Offset Voltage VOE 30 mV IP = 0 A; TA = -40°C to 25°C 11
Nonlinearity ELIN 0.75 % Through the full range of IP; TA = -40°C to 25°C 11
Total Output Error Including Lifetime Drift Etot_drift 6.7 % IP = 65 A 11
Sensitivity Error Including Lifetime Drift Esens_drift 3.8 % IP = 32 A 11
Offset Voltage Including Lifetime Drift Voff_drift 118 mV IP = 0 A 11
Package Thermal Resistance (Junction to Ambient) RθJA 23 °C/W Mounted on Allegro evaluation board with 1500 mm² of 4 oz. copper on each side, connected to pins 1 and 2, and to pins 3 and 4, with thermal vias 3
Package Thermal Resistance (Junction to Lead) RθJL 5 °C/W Mounted on the Allegro ASEK730 evaluation board 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin [2] “-S” denotes lead-free construction with tin-silver-based solder bumps. [3] “-T” denotes Pb-contained construction with Pb-based solder bumps. Operating performance of “-T” and “-S” devices are id 2

CAD (KiCad official)

  • Symbol: ACS730KLCTR-65AB-T
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: acs730klctr-65ab-t-etched.step / acs730klctr-65ab-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); acs730klctr-65ab-t.step / acs730klctr-65ab-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Allegro MicroSystems, LLC datasheet, copy hosted by LCSC (27 pp, sha256 2f58ad93a61d5bcd, retrieved 2026-11-17)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF