Generated by kicad-footprint-generator · KiCad file format 20260206
ACS730KLCTR-65AB-T
Allegro MicroSystems, LLC · Current Sensors · SOIC-8
ACS730KLCTR-65AB-T from Allegro MicroSystems, LLC, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Terminal for the current being sensed; fused internally, and electrically isolated from the sensor leads (pins 5 through 8). |
| 2 | IP+ | passive | Terminal for the current being sensed; fused internally, and electrically isolated from the sensor leads (pins 5 through 8). |
| 3 | IP- | passive | Terminal for the current being sensed; fused internally, and electrically isolated from the sensor leads (pins 5 through 8). |
| 4 | IP- | passive | Terminal for the current being sensed; fused internally, and electrically isolated from the sensor leads (pins 5 through 8). |
| 5 | GND | power_in | Signal ground terminal for the sensor IC. |
| 6 | VZCR | output | Zero current reference; outputs a DC voltage equal to VIOUT at IP = 0 A. |
| 7 | VIOUT | output | Analog output signal that varies linearly with the bidirectional sensed primary current, with a 2.5 V quiescent level for the 65 A part. |
| 8 | VCC | power_in | Device power supply terminal; operates from 4.5 V to 5.5 V (5 V typical) with a supply current of 17 mA typical and 25 mA maximum at VCC = 5 V, output open. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allegro MicroSystems, LLC |
| Package | SOIC-8 |
| Category | Magnetic Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 4.5 | 5 | 5.5 | V | 5 | |
| Supply Current | ICC | 17 | 25 | mA | VCC = 5 V, output open | 5 | |
| Output Capacitance Load | CL | 0.47 | nF | VIOUT to GND | 5 | ||
| Reference Capacitance Load | CVZCR | 1 | nF | VZCR to GND | 5 | ||
| Output Resistive Load | RL | 10 | kΩ | VIOUT to GND, VIOUT to VCC | 5 | ||
| Reference Resistive Load | RVZCR | 10 | kΩ | VZCR to GND, VZCR to VCC | 5 | ||
| Output Low Saturation Voltage | VOL | 0.1 | 0.2 | V | VIOUT, TA = 25°C | 5 | |
| Zero Current Reference Offset Voltage | VZCR(ofs) | -10 | 3 | 10 | mV | TA = 25°C | 5 |
| Zero Current Reference Offset Voltage | VZCR(ofs) | -20 | 10 | 20 | mV | TA = 25°C to 125°C | 5 |
| Current Sensing Range | IPR | -65 | 65 | A | 11 | ||
| Total Output Error | ETOT | -5 | 3 | 5 | % | IP = IP(MAX); TA = 25°C to 125°C | 11 |
| Sensitivity Error | Esens | -3.5 | 3 | 3.5 | % | IP = IP(MAX); TA = 25°C to 125°C | 11 |
| Offset Voltage | VOE | -40 | 20 | 40 | mV | IP = 0 A; TA = 25°C to 125°C | 11 |
| Nonlinearity | ELIN | -2 | 0.75 | 2 | % | Through the full range of IP; TA = 25°C to 125°C | 11 |
| Supply Voltage (absolute maximum) | VCC | 6 | V | 3 | |||
| Reverse Supply Voltage | VCC(R) | -0.1 | V | 3 | |||
| Output Voltage | VIOUT | 6 | V | 3 | |||
| Reverse Output Voltage | VIOUT(R) | -0.1 | V | 3 | |||
| Zero Current Reference Voltage | VZCR | 20 | V | 3 | |||
| Reverse Zero Current Reference Voltage | VZCR(R) | -0.1 | V | 3 | |||
| Operating Ambient Temperature Range K | TA | -40 | 125 | °C | 3 | ||
| Junction Temperature | TJ(max) | 165 | °C | 3 | |||
| Storage Temperature | Tstg | -65 | 170 | °C | 3 | ||
| Power-On Time | tPO | 150 | μs | TA = 25°C | 5 | ||
| Primary Conductor Resistance | RIP | 1.2 | mΩ | TA = 25°C | 5 | ||
| Primary Conductor Inductance | LIP | 2 | nH | TA = 25°C | 5 | ||
| Magnetic Coupling Factor | MCF | 10 | G/A | TA = 25°C | 5 | ||
| Rise Time | tr | 0.6 | μs | TA = 25°C, CL = 0.47 nF | 5 | ||
| Propagation Delay | tpd | 0.2 | µs | TA = 25°C, CL = 0.47 nF | 5 | ||
| Response Time | tRESPONSE | 0.7 | μs | TA = 25°C, CL = 0.47 nF | 5 | ||
| Output Slew Rate | SR | 2.67 | V/µs | TA = 25°C, CL = 1 nF | 5 | ||
| Internal Bandwidth | BW | 1 | MHz | Small signal -3 dB; CL = 0.47 nF | 5 | ||
| Noise Density | IND | 40 | µA/√(Hz) | Input-referenced noise density; TA = 25°C, CL = 0.47 nF | 5 | ||
| Noise | IN | 40 | mARMS | Input-referenced noise; TA = 25°C, CL = 0.47 nF | 5 | ||
| Power Supply Rejection Ratio | PSRR | 35 | dB | 0 to 200 Hz, 100 mV pk-pk ripple on VCC, IP = 0 A, VIOUT and VZCR | 5 | ||
| Sensitivity Power Supply Rejection Ratio | SPSRR | 15 | dB | DC, VCC(min) < VCC < VCC(max), IP = IPR(max) | 5 | ||
| Offset Power Supply Rejection Ratio | OPSRR | 30 | dB | DC, VCC(min) < VCC < VCC(max) | 5 | ||
| Output Source Current | IOUT(src) | 5.5 | mA | VIOUT shorted to GND | 5 | ||
| Output Sink Current | IOUT(snk) | 3 | mA | VIOUT shorted to VCC | 5 | ||
| Zero Current Reference Offset Voltage | VZCR(ofs) | 10 | mV | TA = -40°C to 25°C | 5 | ||
| Reference Source Current | IVZCR(src) | 2 | mA | VZCR shorted to GND | 5 | ||
| Reference Sink Current | IVZCR(snk) | 14 | mA | VZCR shorted to VCC | 5 | ||
| Sensitivity | Sens | 30 | mV/A | 11 | |||
| Zero Current Output Voltage | VIOUT(Q) | 2.5 | V | IP = 0 A, TA = 25°C | 11 | ||
| Zero Current Reference Voltage | VZCR | 2.5 | V | TA = 25°C | 11 | ||
| Total Output Error | ETOT | 5 | % | IP = IP(MAX); TA = -40°C to 25°C | 11 | ||
| Sensitivity Error | Esens | 5 | % | IP = IP(MAX); TA = -40°C to 25°C | 11 | ||
| Offset Voltage | VOE | 30 | mV | IP = 0 A; TA = -40°C to 25°C | 11 | ||
| Nonlinearity | ELIN | 0.75 | % | Through the full range of IP; TA = -40°C to 25°C | 11 | ||
| Total Output Error Including Lifetime Drift | Etot_drift | 6.7 | % | IP = 65 A | 11 | ||
| Sensitivity Error Including Lifetime Drift | Esens_drift | 3.8 | % | IP = 32 A | 11 | ||
| Offset Voltage Including Lifetime Drift | Voff_drift | 118 | mV | IP = 0 A | 11 | ||
| Package Thermal Resistance (Junction to Ambient) | RθJA | 23 | °C/W | Mounted on Allegro evaluation board with 1500 mm² of 4 oz. copper on each side, connected to pins 1 and 2, and to pins 3 and 4, with thermal vias | 3 | ||
| Package Thermal Resistance (Junction to Lead) | RθJL | 5 | °C/W | Mounted on the Allegro ASEK730 evaluation board | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | [2] “-S” denotes lead-free construction with tin-silver-based solder bumps. [3] “-T” denotes Pb-contained construction with Pb-based solder bumps. Operating performance of “-T” and “-S” devices are id | 2 |
CAD (KiCad official)
- Symbol:
ACS730KLCTR-65AB-T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
acs730klctr-65ab-t-etched.step/acs730klctr-65ab-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);acs730klctr-65ab-t.step/acs730klctr-65ab-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Allegro MicroSystems, LLC datasheet, copy hosted by LCSC (27 pp, sha256
2f58ad93a61d5bcd, retrieved 2026-11-17) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).