Generated by kicad-footprint-generator · KiCad file format 20260206
ACS725KMATR-30AU-T
Allegro MicroSystems, LLC · Current Sensors · SOIC-16-300mil
ACS725KMATR-30AU-T from Allegro MicroSystems, LLC, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Terminal for the current being sensed, fused internally; it is one of four IP+ terminals that form the primary conductor's input side. |
| 2 | IP+ | passive | Terminal for the current being sensed, fused internally; it is one of four IP+ terminals that form the primary conductor's input side. |
| 3 | IP+ | passive | Terminal for the current being sensed, fused internally; it is one of four IP+ terminals that form the primary conductor's input side. |
| 4 | IP+ | passive | Terminal for the current being sensed, fused internally; it is one of four IP+ terminals that form the primary conductor's input side. |
| 5 | IP- | passive | Terminal for the current being sensed, fused internally; it is one of four IP- terminals that form the primary conductor's output side. |
| 6 | IP- | passive | Terminal for the current being sensed, fused internally; it is one of four IP- terminals that form the primary conductor's output side. |
| 7 | IP- | passive | Terminal for the current being sensed, fused internally; it is one of four IP- terminals that form the primary conductor's output side. |
| 8 | IP- | passive | Terminal for the current being sensed, fused internally; it is one of four IP- terminals that form the primary conductor's output side. |
| 9 | NC | unconnected | No internal connection; recommended to be left unconnected to maintain high creepage. |
| 10 | VCC | power_in | Device power supply terminal; the datasheet specifies 3 to 3.6 V single supply operation with 3.3 V typical. |
| 11 | NC | unconnected | No internal connection; recommended to connect to GND for the best ESD performance. |
| 12 | VIOUT | output | Analog output signal that changes proportionally with the sensed primary current; for the -30AU variant the zero-current output is VCC × 0.1 (unidirectional). |
| 13 | FILTER | passive | Terminal for an external capacitor that sets the output bandwidth, forming an RC circuit with the internal filter resistance of 1.7 kΩ typical. |
| 14 | NC | unconnected | No internal connection; recommended to connect to GND for the best ESD performance. |
| 15 | GND | power_in | Signal ground terminal. |
| 16 | NC | unconnected | No internal connection; recommended to be left unconnected to maintain high creepage. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allegro MicroSystems, LLC |
| Package | SOIC-16-300mil |
| Category | Sensors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 3 | 3.3 | 3.6 | V | 5 | |
| Supply Current | ICC | 10 | 14 | mA | VCC within VCC(min) and VCC(max) | 5 | |
| Output Capacitance Load | CL | 10 | nF | VIOUT to GND | 5 | ||
| Output Resistive Load | RL | 4.7 | kΩ | VIOUT to GND | 5 | ||
| Saturation Voltage (low) | VOL | 0.3 | V | RL = 4.7 kΩ, TA = 25°C | 5 | ||
| Current Sensing Range | IPR | 0 | 30 | A | 8 | ||
| Total Output Error | ETOT | -2.5 | 1.25 | 2.5 | % | IP = IPR(max), TA = 25°C to 125°C | 8 |
| Sensitivity Error | ESENS | -2 | 1.2 | 2 | % | TA = 25°C to 125°C, measured at IP = IPR(max) | 8 |
| Offset Voltage | VOE | -15 | 10 | 15 | mV | IP = 0 A, TA = 25°C to 125°C | 8 |
| Operating Ambient Temperature (Range K) | TA | -40 | 125 | °C | Range K | 3 | |
| Junction Temperature (max) | TJ(max) | 165 | °C | 3 | |||
| Storage Temperature | Tstg | -65 | 165 | °C | 3 | ||
| Supply Voltage | VCC | 6 | V | 3 | |||
| Reverse Supply Voltage | VRCC | -0.1 | V | 3 | |||
| Reverse Output Voltage | VRIOUT | -0.1 | V | 3 | |||
| Junction-to-Ambient Thermal Resistance | RθJA | 23 | °C/W | Mounted on the Allegro ASEK724/5 MA evaluation board | 3 | ||
| Junction-to-Lead Thermal Resistance | RθJL | 5 | °C/W | Mounted on the Allegro ASEK724/5 MA evaluation board | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | flows through the primary copper conduction path (from pins | 1 |
CAD (KiCad official)
- Symbol:
ACS725KMATR-30AU-T - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
acs725kmatr-30au-t-etched.step/acs725kmatr-30au-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);acs725kmatr-30au-t.step/acs725kmatr-30au-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Allegro MicroSystems, LLC datasheet (19 pp, sha256
2d10e19223d2a51b, retrieved 2026-11-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).