Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ACS725KMATR-30AU-T

Allegro MicroSystems, LLC · Current Sensors · SOIC-16-300mil

ACS725KMATR-30AU-T from Allegro MicroSystems, LLC, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IP+ passive Terminal for the current being sensed, fused internally; it is one of four IP+ terminals that form the primary conductor's input side.
2 IP+ passive Terminal for the current being sensed, fused internally; it is one of four IP+ terminals that form the primary conductor's input side.
3 IP+ passive Terminal for the current being sensed, fused internally; it is one of four IP+ terminals that form the primary conductor's input side.
4 IP+ passive Terminal for the current being sensed, fused internally; it is one of four IP+ terminals that form the primary conductor's input side.
5 IP- passive Terminal for the current being sensed, fused internally; it is one of four IP- terminals that form the primary conductor's output side.
6 IP- passive Terminal for the current being sensed, fused internally; it is one of four IP- terminals that form the primary conductor's output side.
7 IP- passive Terminal for the current being sensed, fused internally; it is one of four IP- terminals that form the primary conductor's output side.
8 IP- passive Terminal for the current being sensed, fused internally; it is one of four IP- terminals that form the primary conductor's output side.
9 NC unconnected No internal connection; recommended to be left unconnected to maintain high creepage.
10 VCC power_in Device power supply terminal; the datasheet specifies 3 to 3.6 V single supply operation with 3.3 V typical.
11 NC unconnected No internal connection; recommended to connect to GND for the best ESD performance.
12 VIOUT output Analog output signal that changes proportionally with the sensed primary current; for the -30AU variant the zero-current output is VCC × 0.1 (unidirectional).
13 FILTER passive Terminal for an external capacitor that sets the output bandwidth, forming an RC circuit with the internal filter resistance of 1.7 kΩ typical.
14 NC unconnected No internal connection; recommended to connect to GND for the best ESD performance.
15 GND power_in Signal ground terminal.
16 NC unconnected No internal connection; recommended to be left unconnected to maintain high creepage.

Key specifications

Parameter Value
Manufacturer Allegro MicroSystems, LLC
Package SOIC-16-300mil
Category Sensors
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC 3 3.3 3.6 V 5
Supply Current ICC 10 14 mA VCC within VCC(min) and VCC(max) 5
Output Capacitance Load CL 10 nF VIOUT to GND 5
Output Resistive Load RL 4.7 kΩ VIOUT to GND 5
Saturation Voltage (low) VOL 0.3 V RL = 4.7 kΩ, TA = 25°C 5
Current Sensing Range IPR 0 30 A 8
Total Output Error ETOT -2.5 1.25 2.5 % IP = IPR(max), TA = 25°C to 125°C 8
Sensitivity Error ESENS -2 1.2 2 % TA = 25°C to 125°C, measured at IP = IPR(max) 8
Offset Voltage VOE -15 10 15 mV IP = 0 A, TA = 25°C to 125°C 8
Operating Ambient Temperature (Range K) TA -40 125 °C Range K 3
Junction Temperature (max) TJ(max) 165 °C 3
Storage Temperature Tstg -65 165 °C 3
Supply Voltage VCC 6 V 3
Reverse Supply Voltage VRCC -0.1 V 3
Reverse Output Voltage VRIOUT -0.1 V 3
Junction-to-Ambient Thermal Resistance RθJA 23 °C/W Mounted on the Allegro ASEK724/5 MA evaluation board 3
Junction-to-Lead Thermal Resistance RθJL 5 °C/W Mounted on the Allegro ASEK724/5 MA evaluation board 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper flows through the primary copper conduction path (from pins 1

CAD (KiCad official)

  • Symbol: ACS725KMATR-30AU-T
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: acs725kmatr-30au-t-etched.step / acs725kmatr-30au-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); acs725kmatr-30au-t.step / acs725kmatr-30au-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Allegro MicroSystems, LLC datasheet (19 pp, sha256 2d10e19223d2a51b, retrieved 2026-11-10, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF