main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs acs723llctr-20au-t: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers acs723llctr-20au-t: viewers · Ray
acs723llctr-20au-t-etched.fit.json acs723llctr-20au-t: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
acs723llctr-20au-t-etched.glb acs723llctr-20au-t: one-pass backfill (re-etched, hero rebuilt in-pass (inputs changed)) · Ray
acs723llctr-20au-t-etched.step acs723llctr-20au-t: one-pass backfill (re-etched) · Ray
acs723llctr-20au-t-hero.glb acs723llctr-20au-t: hero from the plain model · Ray
acs723llctr-20au-t-hero.overlay.json acs723llctr-20au-t: hero from the plain model · Ray
acs723llctr-20au-t.glb Publish 0.1.0 · Ray
acs723llctr-20au-t.kicad_mod Publish 0.1.0 · Ray
acs723llctr-20au-t.kicad_sym Publish 0.1.0 · Ray
acs723llctr-20au-t.lbr Publish 0.1.0 · Ray
acs723llctr-20au-t.step Publish 0.1.0 · Ray
package.json Publish 0.1.2 · Ray
page.json Publish 0.1.2 · Ray
README.md Initial commit: component/acs723llctr-20au-t · Ray

ACS723LLCTR-20AU-T

Allegro MicroSystems LLC · Current Sensors · SOP-8

ACS723LLCTR-20AU-T from Allegro MicroSystems LLC, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IP+ input Primary current sensing input terminal (positive); 0-20 A unidirectional measurement range; internally fused.
2 IP+ input Primary current sensing input terminal (positive); 0-20 A unidirectional measurement range; internally fused.
3 IP- input Primary current sensing input terminal (negative); 0-20 A unidirectional measurement range; internally fused.
4 IP- input Primary current sensing input terminal (negative); 0-20 A unidirectional measurement range; internally fused.
5 GND power_in Signal ground terminal providing galvanic isolation from the primary current sensing path.
6 BW_SEL input Bandwidth selection input; connect to GND for 80 kHz high-bandwidth mode or to VCC for 20 kHz low-noise mode.
7 VIOUT output Analog output voltage with 200 mV/A sensitivity typical; 0.5-4.5 V output for 0-20 A input current; minimum load impedance 4.7 kΩ, maximum load capacitance 10 nF.
8 VCC power_in Positive power supply input; 4.5-5.5 V operating range; typical supply current 9-14 mA.

Key specifications

Parameter Value
Manufacturer Allegro MicroSystems LLC
Package SOP-8
Category Magnetic Sensors
Pins 8

CAD (KiCad official)

  • Symbol: ACS723LLCTR-20AU-T
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: acs723llctr-20au-t-etched.step / acs723llctr-20au-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); acs723llctr-20au-t.step / acs723llctr-20au-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Allegro MicroSystems LLC datasheet (24 pp, sha256 29b651eb6a6c9277, retrieved 2026-09-22, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-4-6 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF