component
ACS723LLCTR-20AU-T
Public Made by Adomby adom
Allegro MicroSystems LLC Current Sensors, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownACS723LLCTR-20AU-T
Allegro MicroSystems LLC · Current Sensors · SOP-8
ACS723LLCTR-20AU-T from Allegro MicroSystems LLC, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | input | Primary current sensing input terminal (positive); 0-20 A unidirectional measurement range; internally fused. |
| 2 | IP+ | input | Primary current sensing input terminal (positive); 0-20 A unidirectional measurement range; internally fused. |
| 3 | IP- | input | Primary current sensing input terminal (negative); 0-20 A unidirectional measurement range; internally fused. |
| 4 | IP- | input | Primary current sensing input terminal (negative); 0-20 A unidirectional measurement range; internally fused. |
| 5 | GND | power_in | Signal ground terminal providing galvanic isolation from the primary current sensing path. |
| 6 | BW_SEL | input | Bandwidth selection input; connect to GND for 80 kHz high-bandwidth mode or to VCC for 20 kHz low-noise mode. |
| 7 | VIOUT | output | Analog output voltage with 200 mV/A sensitivity typical; 0.5-4.5 V output for 0-20 A input current; minimum load impedance 4.7 kΩ, maximum load capacitance 10 nF. |
| 8 | VCC | power_in | Positive power supply input; 4.5-5.5 V operating range; typical supply current 9-14 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allegro MicroSystems LLC |
| Package | SOP-8 |
| Category | Magnetic Sensors |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
ACS723LLCTR-20AU-T - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
acs723llctr-20au-t-etched.step/acs723llctr-20au-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);acs723llctr-20au-t.step/acs723llctr-20au-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Allegro MicroSystems LLC datasheet (24 pp, sha256
29b651eb6a6c9277, retrieved 2026-09-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).