main
Ray
Publish 0.1.0
eab2cee
ACS71240LLCBTR-045B5
Allegro MicroSystems, LLC · Current Sensors · SOIC-8
ACS71240LLCBTR-045B5 from Allegro MicroSystems, LLC, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Positive terminal for the current being sensed; fused internally. |
| 2 | IP+ | passive | Positive terminal for the current being sensed; fused internally. |
| 3 | IP- | passive | Negative terminal for the current being sensed; fused internally. |
| 4 | IP- | passive | Negative terminal for the current being sensed; fused internally. |
| 5 | GND | power_in | Signal ground terminal. |
| 6 | FAULT | output | Overcurrent fault output, active low. |
| 7 | VIOUT | output | Analog output signal proportional to the measured current. |
| 8 | VCC | power_in | Device power supply terminal. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allegro MicroSystems, LLC |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (5 V variant) | VCC | 4.5 | 5 | 5.5 | V | 5 V variant | 7 |
| Supply Current (5 V variant) | ICC | 10 | 12 | mA | 5 V variant, no load on VIOUT | 7 | |
| Output Capacitive Load | CL | 4.7 | nF | VIOUT to GND | 7 | ||
| Output Resistive Load | RL | 10 | kΩ | VIOUT to GND | 7 | ||
| Rise Time | tr | 3 | 4 | μs | TA = 25°C, CL = 1 nF | 7 | |
| Propagation Delay | tpd | 1.6 | 2.2 | μs | TA = 25°C, CL = 1 nF | 7 | |
| Response Time | tRESPONSE | 4 | 4.9 | μs | TA = 25°C, CL = 1 nF | 7 | |
| Nonlinearity (SOIC-8 package) | ELIN | -1 | 1 | % | Through full range of IP, SOIC-8 package | 7 | |
| Output Saturation Voltage Low | VSAT_L | 0.3 | V | RL = 10 kΩ | 7 | ||
| FAULT Current Hysteresis | IF(HYS) | 3 | 12 | % | Percent of IPR(MAX) | 8 | |
| FAULT Output Pullup Resistor | RPU | 10 | 500 | kΩ | 8 | ||
| FAULT Output Voltage | VOL | 0.3 | V | RPU = 10 kΩ, during fault condition | 8 | ||
| FAULT Response Time | tFAULT | 1.5 | 2.5 | µs | Time from /IP/ rising above /IFAULT/ until VFAULT < VOL(MAX); 100 pF from FAULT to GND; input step 20% above IFAULT, rise time ≤ 1 µs | 8 | |
| FAULT Error | EF | -10 | 3.5 | 10 | % | IFAULT, TA = 25°C | 8 |
| FAULT Error | EF | -10 | 5 | 10 | % | TA = -40°C or TA(MAX) | 8 |
| Optimized Sensing Range | IPR | -45 | 45 | A | 20 | ||
| Total Output Error | ETOT | -2 | 0.7 | 2 | % | IP = IPR(max), TA = 25°C to 150°C | 20 |
| Total Output Error | ETOT | -6 | 1.4 | 6 | % | IP = IPR(max), TA = -40°C to 25°C | 20 |
| Sensitivity Error | ESENS | -1.9 | 0.6 | 1.9 | % | IP = IPR(max), TA = 25°C to 150°C | 20 |
| Sensitivity Error | ESENS | -5.5 | 1.4 | 5.5 | % | IP = IPR(max), TA = -40°C to 25°C | 20 |
| Voltage Offset Error | VOE | -10 | 6.9 | 10 | mV | IP = 0 A, TA = 25°C to 150°C | 20 |
| Voltage Offset Error | VOE | -30 | 7.2 | 30 | mV | IP = 0 A, TA = -40°C to 25°C | 20 |
| Supply Voltage | VCC | 6 | V | 4 | |||
| Reverse Supply Voltage | VCC(R) | -0.5 | V | 4 | |||
| Reverse Output Voltage | VIOUT(R) | -0.5 | V | 4 | |||
| FAULT Voltage | VFAULT | 25 | V | 4 | |||
| Reverse FAULT Voltage | VFAULT(R) | -0.5 | V | 4 | |||
| Maximum Continuous Current (SOIC-8) | ICMAX | 55 | A | TA = 25°C, SOIC-8 package | 4 | ||
| Operating Ambient Temperature Range (Range L, SOIC-8) | TA | -40 | 150 | °C | Range L (SOIC-8 package) | 4 | |
| Maximum Junction Temperature | TJ(MAX) | 165 | °C | 4 | |||
| Storage Temperature Range | Tstg | -65 | 170 | °C | 4 | ||
| Dielectric Surge Strength Test Voltage (SOIC-8) | VSURGE | 6000 | V | IEC 61000-4-5, 1.2 µs (rise) / 50 µs (width), ±5 pulses | 4 | ||
| Dielectric Strength Test Voltage (SOIC-8) | VISO | 2400 | VRMS | Agency type-tested 60 s per UL 60950-1; production-tested 1 s | 4 | ||
| Working Voltage for Basic Isolation (SOIC-8) | VWVBI | 420 | VPK or VDC | Basic (single) isolation per UL 60950-1 (edition 2) | 4 | ||
| Working Voltage for Basic Isolation (SOIC-8) | VWVBI | 297 | VRMS | Basic (single) isolation per UL 60950-1 (edition 2) | 4 | ||
| Clearance (SOIC-8) | Dcl | 4.2 | mm | Minimum distance through air from IP leads to signal leads | 4 | ||
| Creepage (SOIC-8) | Dcr | 4.2 | mm | Minimum distance along package body from IP leads to signal leads | 4 | ||
| Comparative Tracking Index (SOIC-8) | CTI | 400 | 599 | V | Material Group II | 4 | |
| Human Body Model ESD (SOIC-8) | VHBM | -6.5 | 6.5 | kV | Per JEDEC JS-001, SOIC-8 package | 4 | |
| Charged Device Model ESD | VCDM | -1 | 1 | kV | Per JEDEC JS-002 | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | [1] -S denotes the lead-free construction with tin-silver-based solder bumps. Advanced information. Pb-free variants are not yet released. [2] Contact Allegro for additional packing options. | 3 |
CAD (KiCad official)
- Symbol:
ACS71240LLCBTR-045B5 - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.62 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
acs71240llcbtr-045b5-etched.step/acs71240llcbtr-045b5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);acs71240llcbtr-045b5.step/acs71240llcbtr-045b5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Allegro MicroSystems, LLC datasheet (33 pp, sha256
efd21dc93a8be43b, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ACS71240LLCBTR-045B5
**Allegro MicroSystems, LLC** · Current Sensors · SOIC-8
ACS71240LLCBTR-045B5 from Allegro MicroSystems, LLC, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Positive terminal for the current being sensed; fused internally. |
| 2 | IP+ | passive | Positive terminal for the current being sensed; fused internally. |
| 3 | IP- | passive | Negative terminal for the current being sensed; fused internally. |
| 4 | IP- | passive | Negative terminal for the current being sensed; fused internally. |
| 5 | GND | power_in | Signal ground terminal. |
| 6 | FAULT | output | Overcurrent fault output, active low. |
| 7 | VIOUT | output | Analog output signal proportional to the measured current. |
| 8 | VCC | power_in | Device power supply terminal. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allegro MicroSystems, LLC |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (5 V variant) | VCC | 4.5 | 5 | 5.5 | V | 5 V variant | 7 |
| Supply Current (5 V variant) | ICC | | 10 | 12 | mA | 5 V variant, no load on VIOUT | 7 |
| Output Capacitive Load | CL | | | 4.7 | nF | VIOUT to GND | 7 |
| Output Resistive Load | RL | 10 | | | kΩ | VIOUT to GND | 7 |
| Rise Time | tr | | 3 | 4 | μs | TA = 25°C, CL = 1 nF | 7 |
| Propagation Delay | tpd | | 1.6 | 2.2 | μs | TA = 25°C, CL = 1 nF | 7 |
| Response Time | tRESPONSE | | 4 | 4.9 | μs | TA = 25°C, CL = 1 nF | 7 |
| Nonlinearity (SOIC-8 package) | ELIN | -1 | | 1 | % | Through full range of IP, SOIC-8 package | 7 |
| Output Saturation Voltage Low | VSAT_L | | | 0.3 | V | RL = 10 kΩ | 7 |
| FAULT Current Hysteresis | IF(HYS) | 3 | 12 | | % | Percent of IPR(MAX) | 8 |
| FAULT Output Pullup Resistor | RPU | 10 | | 500 | kΩ | | 8 |
| FAULT Output Voltage | VOL | | | 0.3 | V | RPU = 10 kΩ, during fault condition | 8 |
| FAULT Response Time | tFAULT | | 1.5 | 2.5 | µs | Time from /IP/ rising above /IFAULT/ until VFAULT < VOL(MAX); 100 pF from FAULT to GND; input step 20% above IFAULT, rise time ≤ 1 µs | 8 |
| FAULT Error | EF | -10 | 3.5 | 10 | % | IFAULT, TA = 25°C | 8 |
| FAULT Error | EF | -10 | 5 | 10 | % | TA = -40°C or TA(MAX) | 8 |
| Optimized Sensing Range | IPR | -45 | | 45 | A | | 20 |
| Total Output Error | ETOT | -2 | 0.7 | 2 | % | IP = IPR(max), TA = 25°C to 150°C | 20 |
| Total Output Error | ETOT | -6 | 1.4 | 6 | % | IP = IPR(max), TA = -40°C to 25°C | 20 |
| Sensitivity Error | ESENS | -1.9 | 0.6 | 1.9 | % | IP = IPR(max), TA = 25°C to 150°C | 20 |
| Sensitivity Error | ESENS | -5.5 | 1.4 | 5.5 | % | IP = IPR(max), TA = -40°C to 25°C | 20 |
| Voltage Offset Error | VOE | -10 | 6.9 | 10 | mV | IP = 0 A, TA = 25°C to 150°C | 20 |
| Voltage Offset Error | VOE | -30 | 7.2 | 30 | mV | IP = 0 A, TA = -40°C to 25°C | 20 |
| Supply Voltage | VCC | | | 6 | V | | 4 |
| Reverse Supply Voltage | VCC(R) | -0.5 | | | V | | 4 |
| Reverse Output Voltage | VIOUT(R) | -0.5 | | | V | | 4 |
| FAULT Voltage | VFAULT | | | 25 | V | | 4 |
| Reverse FAULT Voltage | VFAULT(R) | -0.5 | | | V | | 4 |
| Maximum Continuous Current (SOIC-8) | ICMAX | | | 55 | A | TA = 25°C, SOIC-8 package | 4 |
| Operating Ambient Temperature Range (Range L, SOIC-8) | TA | -40 | | 150 | °C | Range L (SOIC-8 package) | 4 |
| Maximum Junction Temperature | TJ(MAX) | | | 165 | °C | | 4 |
| Storage Temperature Range | Tstg | -65 | | 170 | °C | | 4 |
| Dielectric Surge Strength Test Voltage (SOIC-8) | VSURGE | | | 6000 | V | IEC 61000-4-5, 1.2 µs (rise) / 50 µs (width), ±5 pulses | 4 |
| Dielectric Strength Test Voltage (SOIC-8) | VISO | | | 2400 | VRMS | Agency type-tested 60 s per UL 60950-1; production-tested 1 s | 4 |
| Working Voltage for Basic Isolation (SOIC-8) | VWVBI | | | 420 | VPK or VDC | Basic (single) isolation per UL 60950-1 (edition 2) | 4 |
| Working Voltage for Basic Isolation (SOIC-8) | VWVBI | | | 297 | VRMS | Basic (single) isolation per UL 60950-1 (edition 2) | 4 |
| Clearance (SOIC-8) | Dcl | 4.2 | | | mm | Minimum distance through air from IP leads to signal leads | 4 |
| Creepage (SOIC-8) | Dcr | 4.2 | | | mm | Minimum distance along package body from IP leads to signal leads | 4 |
| Comparative Tracking Index (SOIC-8) | CTI | 400 | | 599 | V | Material Group II | 4 |
| Human Body Model ESD (SOIC-8) | VHBM | -6.5 | | 6.5 | kV | Per JEDEC JS-001, SOIC-8 package | 4 |
| Charged Device Model ESD | VCDM | -1 | | 1 | kV | Per JEDEC JS-002 | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | [1] -S denotes the lead-free construction with tin-silver-based solder bumps. Advanced information. Pb-free variants are not yet released. [2] Contact Allegro for additional packing options. | 3 |
## CAD (KiCad official)
- Symbol: `ACS71240LLCBTR-045B5`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.62 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files: `acs71240llcbtr-045b5-etched.step` / `acs71240llcbtr-045b5-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `acs71240llcbtr-045b5.step` / `acs71240llcbtr-045b5.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Allegro MicroSystems, LLC datasheet](docs/acs71240llcbtr-045b5-datasheet.pdf) (33 pp, sha256 `efd21dc93a8be43b`, retrieved 2026-11-12, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/acs71240llcbtr-045b5-datasheet.pdf)