Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ACS71240LLCBTR-045B5

Allegro MicroSystems, LLC · Current Sensors · SOIC-8

ACS71240LLCBTR-045B5 from Allegro MicroSystems, LLC, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IP+ passive Positive terminal for the current being sensed; fused internally.
2 IP+ passive Positive terminal for the current being sensed; fused internally.
3 IP- passive Negative terminal for the current being sensed; fused internally.
4 IP- passive Negative terminal for the current being sensed; fused internally.
5 GND power_in Signal ground terminal.
6 FAULT output Overcurrent fault output, active low.
7 VIOUT output Analog output signal proportional to the measured current.
8 VCC power_in Device power supply terminal.

Key specifications

Parameter Value
Manufacturer Allegro MicroSystems, LLC
Package SOIC-8
Category Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (5 V variant) VCC 4.5 5 5.5 V 5 V variant 7
Supply Current (5 V variant) ICC 10 12 mA 5 V variant, no load on VIOUT 7
Output Capacitive Load CL 4.7 nF VIOUT to GND 7
Output Resistive Load RL 10 kΩ VIOUT to GND 7
Rise Time tr 3 4 μs TA = 25°C, CL = 1 nF 7
Propagation Delay tpd 1.6 2.2 μs TA = 25°C, CL = 1 nF 7
Response Time tRESPONSE 4 4.9 μs TA = 25°C, CL = 1 nF 7
Nonlinearity (SOIC-8 package) ELIN -1 1 % Through full range of IP, SOIC-8 package 7
Output Saturation Voltage Low VSAT_L 0.3 V RL = 10 kΩ 7
FAULT Current Hysteresis IF(HYS) 3 12 % Percent of IPR(MAX) 8
FAULT Output Pullup Resistor RPU 10 500 kΩ 8
FAULT Output Voltage VOL 0.3 V RPU = 10 kΩ, during fault condition 8
FAULT Response Time tFAULT 1.5 2.5 µs Time from /IP/ rising above /IFAULT/ until VFAULT < VOL(MAX); 100 pF from FAULT to GND; input step 20% above IFAULT, rise time ≤ 1 µs 8
FAULT Error EF -10 3.5 10 % IFAULT, TA = 25°C 8
FAULT Error EF -10 5 10 % TA = -40°C or TA(MAX) 8
Optimized Sensing Range IPR -45 45 A 20
Total Output Error ETOT -2 0.7 2 % IP = IPR(max), TA = 25°C to 150°C 20
Total Output Error ETOT -6 1.4 6 % IP = IPR(max), TA = -40°C to 25°C 20
Sensitivity Error ESENS -1.9 0.6 1.9 % IP = IPR(max), TA = 25°C to 150°C 20
Sensitivity Error ESENS -5.5 1.4 5.5 % IP = IPR(max), TA = -40°C to 25°C 20
Voltage Offset Error VOE -10 6.9 10 mV IP = 0 A, TA = 25°C to 150°C 20
Voltage Offset Error VOE -30 7.2 30 mV IP = 0 A, TA = -40°C to 25°C 20
Supply Voltage VCC 6 V 4
Reverse Supply Voltage VCC(R) -0.5 V 4
Reverse Output Voltage VIOUT(R) -0.5 V 4
FAULT Voltage VFAULT 25 V 4
Reverse FAULT Voltage VFAULT(R) -0.5 V 4
Maximum Continuous Current (SOIC-8) ICMAX 55 A TA = 25°C, SOIC-8 package 4
Operating Ambient Temperature Range (Range L, SOIC-8) TA -40 150 °C Range L (SOIC-8 package) 4
Maximum Junction Temperature TJ(MAX) 165 °C 4
Storage Temperature Range Tstg -65 170 °C 4
Dielectric Surge Strength Test Voltage (SOIC-8) VSURGE 6000 V IEC 61000-4-5, 1.2 µs (rise) / 50 µs (width), ±5 pulses 4
Dielectric Strength Test Voltage (SOIC-8) VISO 2400 VRMS Agency type-tested 60 s per UL 60950-1; production-tested 1 s 4
Working Voltage for Basic Isolation (SOIC-8) VWVBI 420 VPK or VDC Basic (single) isolation per UL 60950-1 (edition 2) 4
Working Voltage for Basic Isolation (SOIC-8) VWVBI 297 VRMS Basic (single) isolation per UL 60950-1 (edition 2) 4
Clearance (SOIC-8) Dcl 4.2 mm Minimum distance through air from IP leads to signal leads 4
Creepage (SOIC-8) Dcr 4.2 mm Minimum distance along package body from IP leads to signal leads 4
Comparative Tracking Index (SOIC-8) CTI 400 599 V Material Group II 4
Human Body Model ESD (SOIC-8) VHBM -6.5 6.5 kV Per JEDEC JS-001, SOIC-8 package 4
Charged Device Model ESD VCDM -1 1 kV Per JEDEC JS-002 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin [1] -S denotes the lead-free construction with tin-silver-based solder bumps. Advanced information. Pb-free variants are not yet released. [2] Contact Allegro for additional packing options. 3

CAD (KiCad official)

  • Symbol: ACS71240LLCBTR-045B5
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.62 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: acs71240llcbtr-045b5-etched.step / acs71240llcbtr-045b5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); acs71240llcbtr-045b5.step / acs71240llcbtr-045b5.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Allegro MicroSystems, LLC datasheet (33 pp, sha256 efd21dc93a8be43b, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF