main
Ray Publish 0.1.0 22f3c2e

ACS710KLATR-6BB-T

Allegro MicroSystems, LLC · Current Sensors · SOIC-16-300mil

ACS710KLATR-6BB-T from Allegro MicroSystems, LLC, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IP+ passive Sensed current copper conduction path pin; fused internally and looped to the IP- pins, carrying unidirectional or bidirectional current.
2 IP+ passive Sensed current copper conduction path pin; fused internally and looped to the IP- pins, carrying unidirectional or bidirectional current.
3 IP+ passive Sensed current copper conduction path pin; fused internally and looped to the IP- pins, carrying unidirectional or bidirectional current.
4 IP+ passive Sensed current copper conduction path pin; fused internally and looped to the IP- pins, carrying unidirectional or bidirectional current.
5 IP- passive Sensed current copper conduction path pin; fused internally and looped to the IP+ pins, carrying unidirectional or bidirectional current.
6 IP- passive Sensed current copper conduction path pin; fused internally and looped to the IP+ pins, carrying unidirectional or bidirectional current.
7 IP- passive Sensed current copper conduction path pin; fused internally and looped to the IP+ pins, carrying unidirectional or bidirectional current.
8 IP- passive Sensed current copper conduction path pin; fused internally and looped to the IP+ pins, carrying unidirectional or bidirectional current.
9 GND power_in Device ground connection.
10 VZCR output Voltage reference output giving a zero-current (0 A) reference that scales with VCC; it is not a highly accurate reference.
11 FILTER passive Filter pin for an external capacitor from this pin to GND that sets the device bandwidth.
12 VIOUT output Analog output whose voltage is proportional to the current flowing between the IP+ and IP- pins.
13 FAULT output Overcurrent fault output that transitions to a logic low state when the current between IP+ and IP- exceeds the overcurrent fault threshold.
14 VCC power_in Supply voltage pin; the datasheet specifies 3 V to 5.5 V supply range.
15 VOC input Overcurrent input whose analog voltage sets the overcurrent fault threshold; the setting range is VCC × 0.25 to VCC × 0.4.
16 FAULT_EN input Enables overcurrent faulting when driven high; the input high threshold is 0.8 × VCC minimum and the low threshold is 0.1 × VCC maximum.

Key specifications

Parameter Value
Manufacturer Allegro MicroSystems, LLC
Package SOIC-16-300mil
Category Sensors
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC 3 5.5 V 7
Supply Current ICC 11 14.5 mA VIOUT open, FAULT pin high 7
Output Capacitance Load CLOAD 10 nF VIOUT pin to GND 7
Output Resistive Load RLOAD 10 kΩ VIOUT pin to GND 7
Full Range Linearity ELIN -0.75 0.25 0.75 % IP = ±IP0A 7
Symmetry ESYM 99.1 100 100.9 % IP = ±IP0A 7
Setting Voltage for Overcurrent Switchpoint VOC 0.25 0.4 ×VCC 7
Overcurrent Fault Pin Output Voltage FAULT 0.4 V 1 mA sink current at FAULT pin 7
Fault Enable (FAULT_EN Pin) Input Low Voltage Threshold VIL 0.1 ×VCC 7
Fault Enable (FAULT_EN Pin) Input High Voltage Threshold VIH 0.8 ×VCC 7
Overcurrent Input Pin Resistance ROC 2 MΩ TA = 25°C, VOC pin to GND 8
Voltage Reference Output VZCR 0.48 0.5 0.51 ×VCC TA = 25 °C 8
Voltage Reference Output Load Current IZCR 3 mA Source current 8
Voltage Reference Output Load Current IZCR 50 µA Sink current 8
Optimized Accuracy Range (X6BB) IPOA -7.5 7.5 A 9
Linear Sensing Range (X6BB) IR -14 14 A 9
Supply Voltage VCC 8 V 4
Filter Pin Voltage VFILTER 8 V 4
Analog Output Pin Voltage VIOUT 32 V 4
Overcurrent Input Pin Voltage VOC 8 V 4
Overcurrent FAULT Pin Voltage FAULT 8 V 4
Fault Enable (FAULT_EN) Pin Voltage VFAULTEN 8 V 4
Voltage Reference Output Pin Voltage VZCR 8 V 4
DC Reverse Voltage: VCC, FILTER, VIOUT, VOC, FAULT, FAULT_EN, and VZCR Pins VRdcx -0.5 V 4
Excess to Supply Voltage: FILTER, VIOUT, VOC, FAULT, FAULT_EN, and VZCR Pins VEX 0.3 V Voltage by which pin voltage can exceed the VCC pin voltage 4
Output Current Source IIOUT(Source) 3 mA 4
Output Current Sink IIOUT(Sink) 1 mA 4
Operating Ambient Temperature (Range K) TA -40 125 °C 4
Junction Temperature TJ(max) 165 °C 4
Storage Temperature Tstg -65 170 °C 4
Package Thermal Resistance RθJA 17 ºC/W Mounted on Allegro demo board, 1332 mm2 of 2 oz. copper with thermal vias 4
Working Voltage for Basic Isolation VWVBI 870 VPK or VDC IEC/UL 60950-1 (2nd Edition), basic (single) isolation 4
Working Voltage for Basic Isolation VWVBI 616 VRMS IEC/UL 60950-1 (2nd Edition), basic (single) isolation 4
Clearance DCL 7.5 mm Minimum distance through air from IP leads to signal leads 4
Creepage DCR 7.5 mm Minimum distance along package body from IP leads to signal leads 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper 1,2,3,4 IP+ Sensed current copper conduction path pins. Terminals for current being sensed; 5

CAD (KiCad official)

  • Symbol: ACS710KLATR-6BB-T
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: acs710klatr-6bb-t-etched.step / acs710klatr-6bb-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); acs710klatr-6bb-t.step / acs710klatr-6bb-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Allegro MicroSystems, LLC datasheet (24 pp, sha256 601c2523d8411c10, retrieved 2026-11-12, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF