3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownACS710KLATR-6BB-T
Allegro MicroSystems, LLC · Current Sensors · SOIC-16-300mil
ACS710KLATR-6BB-T from Allegro MicroSystems, LLC, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Sensed current copper conduction path pin; fused internally and looped to the IP- pins, carrying unidirectional or bidirectional current. |
| 2 | IP+ | passive | Sensed current copper conduction path pin; fused internally and looped to the IP- pins, carrying unidirectional or bidirectional current. |
| 3 | IP+ | passive | Sensed current copper conduction path pin; fused internally and looped to the IP- pins, carrying unidirectional or bidirectional current. |
| 4 | IP+ | passive | Sensed current copper conduction path pin; fused internally and looped to the IP- pins, carrying unidirectional or bidirectional current. |
| 5 | IP- | passive | Sensed current copper conduction path pin; fused internally and looped to the IP+ pins, carrying unidirectional or bidirectional current. |
| 6 | IP- | passive | Sensed current copper conduction path pin; fused internally and looped to the IP+ pins, carrying unidirectional or bidirectional current. |
| 7 | IP- | passive | Sensed current copper conduction path pin; fused internally and looped to the IP+ pins, carrying unidirectional or bidirectional current. |
| 8 | IP- | passive | Sensed current copper conduction path pin; fused internally and looped to the IP+ pins, carrying unidirectional or bidirectional current. |
| 9 | GND | power_in | Device ground connection. |
| 10 | VZCR | output | Voltage reference output giving a zero-current (0 A) reference that scales with VCC; it is not a highly accurate reference. |
| 11 | FILTER | passive | Filter pin for an external capacitor from this pin to GND that sets the device bandwidth. |
| 12 | VIOUT | output | Analog output whose voltage is proportional to the current flowing between the IP+ and IP- pins. |
| 13 | FAULT | output | Overcurrent fault output that transitions to a logic low state when the current between IP+ and IP- exceeds the overcurrent fault threshold. |
| 14 | VCC | power_in | Supply voltage pin; the datasheet specifies 3 V to 5.5 V supply range. |
| 15 | VOC | input | Overcurrent input whose analog voltage sets the overcurrent fault threshold; the setting range is VCC × 0.25 to VCC × 0.4. |
| 16 | FAULT_EN | input | Enables overcurrent faulting when driven high; the input high threshold is 0.8 × VCC minimum and the low threshold is 0.1 × VCC maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allegro MicroSystems, LLC |
| Package | SOIC-16-300mil |
| Category | Sensors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 3 | 5.5 | V | 7 | ||
| Supply Current | ICC | 11 | 14.5 | mA | VIOUT open, FAULT pin high | 7 | |
| Output Capacitance Load | CLOAD | 10 | nF | VIOUT pin to GND | 7 | ||
| Output Resistive Load | RLOAD | 10 | kΩ | VIOUT pin to GND | 7 | ||
| Full Range Linearity | ELIN | -0.75 | 0.25 | 0.75 | % | IP = ±IP0A | 7 |
| Symmetry | ESYM | 99.1 | 100 | 100.9 | % | IP = ±IP0A | 7 |
| Setting Voltage for Overcurrent Switchpoint | VOC | 0.25 | 0.4 | ×VCC | 7 | ||
| Overcurrent Fault Pin Output Voltage | FAULT | 0.4 | V | 1 mA sink current at FAULT pin | 7 | ||
| Fault Enable (FAULT_EN Pin) Input Low Voltage Threshold | VIL | 0.1 | ×VCC | 7 | |||
| Fault Enable (FAULT_EN Pin) Input High Voltage Threshold | VIH | 0.8 | ×VCC | 7 | |||
| Overcurrent Input Pin Resistance | ROC | 2 | MΩ | TA = 25°C, VOC pin to GND | 8 | ||
| Voltage Reference Output | VZCR | 0.48 | 0.5 | 0.51 | ×VCC | TA = 25 °C | 8 |
| Voltage Reference Output Load Current | IZCR | 3 | mA | Source current | 8 | ||
| Voltage Reference Output Load Current | IZCR | 50 | µA | Sink current | 8 | ||
| Optimized Accuracy Range (X6BB) | IPOA | -7.5 | 7.5 | A | 9 | ||
| Linear Sensing Range (X6BB) | IR | -14 | 14 | A | 9 | ||
| Supply Voltage | VCC | 8 | V | 4 | |||
| Filter Pin Voltage | VFILTER | 8 | V | 4 | |||
| Analog Output Pin Voltage | VIOUT | 32 | V | 4 | |||
| Overcurrent Input Pin Voltage | VOC | 8 | V | 4 | |||
| Overcurrent FAULT Pin Voltage | FAULT | 8 | V | 4 | |||
| Fault Enable (FAULT_EN) Pin Voltage | VFAULTEN | 8 | V | 4 | |||
| Voltage Reference Output Pin Voltage | VZCR | 8 | V | 4 | |||
| DC Reverse Voltage: VCC, FILTER, VIOUT, VOC, FAULT, FAULT_EN, and VZCR Pins | VRdcx | -0.5 | V | 4 | |||
| Excess to Supply Voltage: FILTER, VIOUT, VOC, FAULT, FAULT_EN, and VZCR Pins | VEX | 0.3 | V | Voltage by which pin voltage can exceed the VCC pin voltage | 4 | ||
| Output Current Source | IIOUT(Source) | 3 | mA | 4 | |||
| Output Current Sink | IIOUT(Sink) | 1 | mA | 4 | |||
| Operating Ambient Temperature (Range K) | TA | -40 | 125 | °C | 4 | ||
| Junction Temperature | TJ(max) | 165 | °C | 4 | |||
| Storage Temperature | Tstg | -65 | 170 | °C | 4 | ||
| Package Thermal Resistance | RθJA | 17 | ºC/W | Mounted on Allegro demo board, 1332 mm2 of 2 oz. copper with thermal vias | 4 | ||
| Working Voltage for Basic Isolation | VWVBI | 870 | VPK or VDC | IEC/UL 60950-1 (2nd Edition), basic (single) isolation | 4 | ||
| Working Voltage for Basic Isolation | VWVBI | 616 | VRMS | IEC/UL 60950-1 (2nd Edition), basic (single) isolation | 4 | ||
| Clearance | DCL | 7.5 | mm | Minimum distance through air from IP leads to signal leads | 4 | ||
| Creepage | DCR | 7.5 | mm | Minimum distance along package body from IP leads to signal leads | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | 1,2,3,4 IP+ Sensed current copper conduction path pins. Terminals for current being sensed; | 5 |
CAD (KiCad official)
- Symbol:
ACS710KLATR-6BB-T - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
acs710klatr-6bb-t-etched.step/acs710klatr-6bb-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);acs710klatr-6bb-t.step/acs710klatr-6bb-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Allegro MicroSystems, LLC datasheet (24 pp, sha256
601c2523d8411c10, retrieved 2026-11-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).