main
Ray
Publish 0.1.0
0d39d7f
ACS710KLATR-25CB-T
Allegro MicroSystems, LLC · Current Sensors · SOIC-16-300mil
ACS710KLATR-25CB-T from Allegro MicroSystems, LLC, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Sensed current copper conduction path pin; fused internally and looped to the IP- pins, carrying unidirectional or bidirectional current flow. |
| 2 | IP+ | passive | Sensed current copper conduction path pin; fused internally and looped to the IP- pins, carrying unidirectional or bidirectional current flow. |
| 3 | IP+ | passive | Sensed current copper conduction path pin; fused internally and looped to the IP- pins, carrying unidirectional or bidirectional current flow. |
| 4 | IP+ | passive | Sensed current copper conduction path pin; fused internally and looped to the IP- pins, carrying unidirectional or bidirectional current flow. |
| 5 | IP- | passive | Sensed current copper conduction path pin; fused internally and looped to the IP+ pins, carrying unidirectional or bidirectional current flow. |
| 6 | IP- | passive | Sensed current copper conduction path pin; fused internally and looped to the IP+ pins, carrying unidirectional or bidirectional current flow. |
| 7 | IP- | passive | Sensed current copper conduction path pin; fused internally and looped to the IP+ pins, carrying unidirectional or bidirectional current flow. |
| 8 | IP- | passive | Sensed current copper conduction path pin; fused internally and looped to the IP+ pins, carrying unidirectional or bidirectional current flow. |
| 9 | GND | power_in | Device ground connection. |
| 10 | VZCR | output | Voltage reference output giving a zero-current (0 A) reference that scales with VCC, not a highly accurate reference; source current 3 mA min and sink current 50 µA min. |
| 11 | FILTER | passive | Filter pin for an external capacitor from this pin to GND that sets the device bandwidth (CF). |
| 12 | VIOUT | output | Analog output whose voltage is proportional to the current between the IP+ and IP- pins; the datasheet limits the load to CLOAD 10 nF max and RLOAD 10 kΩ min to GND. |
| 13 | FAULT | output | Open-drain overcurrent fault output that transitions to logic low when the IP current exceeds the overcurrent fault threshold, with VFAULT 0.4 V max at 1 mA sink. |
| 14 | VCC | power_in | Supply voltage, specified 3 to 5.5 V single supply. |
| 15 | VOC | input | Overcurrent input whose analog voltage sets the fault threshold; the setting range is 0.25×VCC to 0.4×VCC. |
| 16 | FAULT_EN | input | Enables overcurrent faulting when high and resets FAULT when low (latching version); VIH min 0.8×VCC and VIL max 0.1×VCC. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allegro MicroSystems, LLC |
| Package | SOIC-16-300mil |
| Category | Sensors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 3 | 5.5 | V | 6 | ||
| Supply Current | ICC | 11 | 14.5 | mA | VIOUT open, FAULT pin high | 6 | |
| Output Capacitance Load | CLOAD | 10 | nF | VIOUT pin to GND | 6 | ||
| Output Resistive Load | RLOAD | 10 | kΩ | VIOUT pin to GND | 6 | ||
| Full Range Linearity | ELIN | -0.75 | 0.25 | 0.75 | % | IP = ±IP0A | 6 |
| Symmetry | ESYM | 99.1 | 100 | 100.9 | % | IP = ±IP0A | 6 |
| Overcurrent FAULT Pin Output Voltage | VFAULT | 0.4 | V | 1 mA sink current at FAULT pin | 6 | ||
| Overcurrent Input Pin Resistance | ROC | 2 | MΩ | TA = 25°C, VOC pin to GND | 7 | ||
| Voltage Reference Output Load Current (source) | IZCR | 3 | mA | Source current | 7 | ||
| Voltage Reference Output Load Current (sink) | IZCR | 50 | µA | Sink current | 7 | ||
| Optimized Accuracy Range | IPOA | -25 | 25 | A | 9 | ||
| Linear Sensing Range | IR | -75 | 75 | A | 9 | ||
| Supply Voltage | VCC | 8 | V | 3 | |||
| Filter Pin Voltage | VFILTER | 8 | V | 3 | |||
| Analog Output Pin Voltage | VIOUT | 32 | V | 3 | |||
| Overcurrent Input Pin Voltage | VOC | 8 | V | 3 | |||
| Overcurrent FAULT Pin Voltage | VFAULT | 8 | V | 3 | |||
| Fault Enable (FAULT_EN) Pin Voltage | VFAULTEN | 8 | V | 3 | |||
| Voltage Reference Output Pin Voltage | VZCR | 8 | V | 3 | |||
| DC Reverse Voltage (VCC, FILTER, VIOUT, VOC, FAULT, FAULT_EN, VZCR pins) | VRdcx | -0.5 | V | 3 | |||
| Excess Voltage to Supply Voltage (FILTER, VIOUT, VOC, FAULT, FAULT_EN, VZCR pins) | VEX | 0.3 | V | Voltage by which pin voltage can exceed the VCC pin voltage | 3 | ||
| Output Current Source | IIOUT(Source) | 3 | mA | 3 | |||
| Output Current Sink | IIOUT(Sink) | 1 | mA | 3 | |||
| Operating Ambient Temperature Range K | TA | -40 | 125 | °C | 3 | ||
| Junction Temperature | TJ(max) | 165 | °C | 3 | |||
| Storage Temperature | Tstg | -65 | 170 | °C | 3 | ||
| Package Thermal Resistance | RθJA | 17 | °C/W | On Allegro demo board, 1332 mm² 2 oz copper with thermal vias | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | 1,2,3,4 IP+ Sensed current copper conduction path pins. Terminals for current being sensed; | 4 |
CAD (KiCad official)
- Symbol:
ACS710KLATR-25CB-T - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
acs710klatr-25cb-t-etched.step/acs710klatr-25cb-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);acs710klatr-25cb-t.step/acs710klatr-25cb-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Allegro MicroSystems, LLC datasheet (23 pp, sha256
c2acc798fe0eefb1, retrieved 2026-11-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# ACS710KLATR-25CB-T
**Allegro MicroSystems, LLC** · Current Sensors · SOIC-16-300mil
ACS710KLATR-25CB-T from Allegro MicroSystems, LLC, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Sensed current copper conduction path pin; fused internally and looped to the IP- pins, carrying unidirectional or bidirectional current flow. |
| 2 | IP+ | passive | Sensed current copper conduction path pin; fused internally and looped to the IP- pins, carrying unidirectional or bidirectional current flow. |
| 3 | IP+ | passive | Sensed current copper conduction path pin; fused internally and looped to the IP- pins, carrying unidirectional or bidirectional current flow. |
| 4 | IP+ | passive | Sensed current copper conduction path pin; fused internally and looped to the IP- pins, carrying unidirectional or bidirectional current flow. |
| 5 | IP- | passive | Sensed current copper conduction path pin; fused internally and looped to the IP+ pins, carrying unidirectional or bidirectional current flow. |
| 6 | IP- | passive | Sensed current copper conduction path pin; fused internally and looped to the IP+ pins, carrying unidirectional or bidirectional current flow. |
| 7 | IP- | passive | Sensed current copper conduction path pin; fused internally and looped to the IP+ pins, carrying unidirectional or bidirectional current flow. |
| 8 | IP- | passive | Sensed current copper conduction path pin; fused internally and looped to the IP+ pins, carrying unidirectional or bidirectional current flow. |
| 9 | GND | power_in | Device ground connection. |
| 10 | VZCR | output | Voltage reference output giving a zero-current (0 A) reference that scales with VCC, not a highly accurate reference; source current 3 mA min and sink current 50 µA min. |
| 11 | FILTER | passive | Filter pin for an external capacitor from this pin to GND that sets the device bandwidth (CF). |
| 12 | VIOUT | output | Analog output whose voltage is proportional to the current between the IP+ and IP- pins; the datasheet limits the load to CLOAD 10 nF max and RLOAD 10 kΩ min to GND. |
| 13 | FAULT | output | Open-drain overcurrent fault output that transitions to logic low when the IP current exceeds the overcurrent fault threshold, with VFAULT 0.4 V max at 1 mA sink. |
| 14 | VCC | power_in | Supply voltage, specified 3 to 5.5 V single supply. |
| 15 | VOC | input | Overcurrent input whose analog voltage sets the fault threshold; the setting range is 0.25×VCC to 0.4×VCC. |
| 16 | FAULT_EN | input | Enables overcurrent faulting when high and resets FAULT when low (latching version); VIH min 0.8×VCC and VIL max 0.1×VCC. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allegro MicroSystems, LLC |
| Package | SOIC-16-300mil |
| Category | Sensors |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 3 | | 5.5 | V | | 6 |
| Supply Current | ICC | | 11 | 14.5 | mA | VIOUT open, FAULT pin high | 6 |
| Output Capacitance Load | CLOAD | | | 10 | nF | VIOUT pin to GND | 6 |
| Output Resistive Load | RLOAD | 10 | | | kΩ | VIOUT pin to GND | 6 |
| Full Range Linearity | ELIN | -0.75 | 0.25 | 0.75 | % | IP = ±IP0A | 6 |
| Symmetry | ESYM | 99.1 | 100 | 100.9 | % | IP = ±IP0A | 6 |
| Overcurrent FAULT Pin Output Voltage | VFAULT | | | 0.4 | V | 1 mA sink current at FAULT pin | 6 |
| Overcurrent Input Pin Resistance | ROC | 2 | | | MΩ | TA = 25°C, VOC pin to GND | 7 |
| Voltage Reference Output Load Current (source) | IZCR | 3 | | | mA | Source current | 7 |
| Voltage Reference Output Load Current (sink) | IZCR | 50 | | | µA | Sink current | 7 |
| Optimized Accuracy Range | IPOA | -25 | | 25 | A | | 9 |
| Linear Sensing Range | IR | -75 | | 75 | A | | 9 |
| Supply Voltage | VCC | | | 8 | V | | 3 |
| Filter Pin Voltage | VFILTER | | | 8 | V | | 3 |
| Analog Output Pin Voltage | VIOUT | | | 32 | V | | 3 |
| Overcurrent Input Pin Voltage | VOC | | | 8 | V | | 3 |
| Overcurrent FAULT Pin Voltage | VFAULT | | | 8 | V | | 3 |
| Fault Enable (FAULT_EN) Pin Voltage | VFAULTEN | | | 8 | V | | 3 |
| Voltage Reference Output Pin Voltage | VZCR | | | 8 | V | | 3 |
| DC Reverse Voltage (VCC, FILTER, VIOUT, VOC, FAULT, FAULT_EN, VZCR pins) | VRdcx | -0.5 | | | V | | 3 |
| Excess Voltage to Supply Voltage (FILTER, VIOUT, VOC, FAULT, FAULT_EN, VZCR pins) | VEX | | | 0.3 | V | Voltage by which pin voltage can exceed the VCC pin voltage | 3 |
| Output Current Source | IIOUT(Source) | | | 3 | mA | | 3 |
| Output Current Sink | IIOUT(Sink) | | | 1 | mA | | 3 |
| Operating Ambient Temperature Range K | TA | -40 | | 125 | °C | | 3 |
| Junction Temperature | TJ(max) | | | 165 | °C | | 3 |
| Storage Temperature | Tstg | -65 | | 170 | °C | | 3 |
| Package Thermal Resistance | RθJA | | 17 | | °C/W | On Allegro demo board, 1332 mm² 2 oz copper with thermal vias | 3 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | 1,2,3,4 IP+ Sensed current copper conduction path pins. Terminals for current being sensed; | 4 |
## CAD (KiCad official)
- Symbol: `ACS710KLATR-25CB-T`
- Footprint: `Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm`
- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files: `acs710klatr-25cb-t-etched.step` / `acs710klatr-25cb-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `acs710klatr-25cb-t.step` / `acs710klatr-25cb-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Allegro MicroSystems, LLC datasheet](docs/acs710klatr-25cb-t-datasheet.pdf) (23 pp, sha256 `c2acc798fe0eefb1`, retrieved 2026-11-11, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/acs710klatr-25cb-t-datasheet.pdf)