Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ACS710KLATR-25CB-T

Allegro MicroSystems, LLC · Current Sensors · SOIC-16-300mil

ACS710KLATR-25CB-T from Allegro MicroSystems, LLC, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IP+ passive Sensed current copper conduction path pin; fused internally and looped to the IP- pins, carrying unidirectional or bidirectional current flow.
2 IP+ passive Sensed current copper conduction path pin; fused internally and looped to the IP- pins, carrying unidirectional or bidirectional current flow.
3 IP+ passive Sensed current copper conduction path pin; fused internally and looped to the IP- pins, carrying unidirectional or bidirectional current flow.
4 IP+ passive Sensed current copper conduction path pin; fused internally and looped to the IP- pins, carrying unidirectional or bidirectional current flow.
5 IP- passive Sensed current copper conduction path pin; fused internally and looped to the IP+ pins, carrying unidirectional or bidirectional current flow.
6 IP- passive Sensed current copper conduction path pin; fused internally and looped to the IP+ pins, carrying unidirectional or bidirectional current flow.
7 IP- passive Sensed current copper conduction path pin; fused internally and looped to the IP+ pins, carrying unidirectional or bidirectional current flow.
8 IP- passive Sensed current copper conduction path pin; fused internally and looped to the IP+ pins, carrying unidirectional or bidirectional current flow.
9 GND power_in Device ground connection.
10 VZCR output Voltage reference output giving a zero-current (0 A) reference that scales with VCC, not a highly accurate reference; source current 3 mA min and sink current 50 µA min.
11 FILTER passive Filter pin for an external capacitor from this pin to GND that sets the device bandwidth (CF).
12 VIOUT output Analog output whose voltage is proportional to the current between the IP+ and IP- pins; the datasheet limits the load to CLOAD 10 nF max and RLOAD 10 kΩ min to GND.
13 FAULT output Open-drain overcurrent fault output that transitions to logic low when the IP current exceeds the overcurrent fault threshold, with VFAULT 0.4 V max at 1 mA sink.
14 VCC power_in Supply voltage, specified 3 to 5.5 V single supply.
15 VOC input Overcurrent input whose analog voltage sets the fault threshold; the setting range is 0.25×VCC to 0.4×VCC.
16 FAULT_EN input Enables overcurrent faulting when high and resets FAULT when low (latching version); VIH min 0.8×VCC and VIL max 0.1×VCC.

Key specifications

Parameter Value
Manufacturer Allegro MicroSystems, LLC
Package SOIC-16-300mil
Category Sensors
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC 3 5.5 V 6
Supply Current ICC 11 14.5 mA VIOUT open, FAULT pin high 6
Output Capacitance Load CLOAD 10 nF VIOUT pin to GND 6
Output Resistive Load RLOAD 10 kΩ VIOUT pin to GND 6
Full Range Linearity ELIN -0.75 0.25 0.75 % IP = ±IP0A 6
Symmetry ESYM 99.1 100 100.9 % IP = ±IP0A 6
Overcurrent FAULT Pin Output Voltage VFAULT 0.4 V 1 mA sink current at FAULT pin 6
Overcurrent Input Pin Resistance ROC 2 MΩ TA = 25°C, VOC pin to GND 7
Voltage Reference Output Load Current (source) IZCR 3 mA Source current 7
Voltage Reference Output Load Current (sink) IZCR 50 µA Sink current 7
Optimized Accuracy Range IPOA -25 25 A 9
Linear Sensing Range IR -75 75 A 9
Supply Voltage VCC 8 V 3
Filter Pin Voltage VFILTER 8 V 3
Analog Output Pin Voltage VIOUT 32 V 3
Overcurrent Input Pin Voltage VOC 8 V 3
Overcurrent FAULT Pin Voltage VFAULT 8 V 3
Fault Enable (FAULT_EN) Pin Voltage VFAULTEN 8 V 3
Voltage Reference Output Pin Voltage VZCR 8 V 3
DC Reverse Voltage (VCC, FILTER, VIOUT, VOC, FAULT, FAULT_EN, VZCR pins) VRdcx -0.5 V 3
Excess Voltage to Supply Voltage (FILTER, VIOUT, VOC, FAULT, FAULT_EN, VZCR pins) VEX 0.3 V Voltage by which pin voltage can exceed the VCC pin voltage 3
Output Current Source IIOUT(Source) 3 mA 3
Output Current Sink IIOUT(Sink) 1 mA 3
Operating Ambient Temperature Range K TA -40 125 °C 3
Junction Temperature TJ(max) 165 °C 3
Storage Temperature Tstg -65 170 °C 3
Package Thermal Resistance RθJA 17 °C/W On Allegro demo board, 1332 mm² 2 oz copper with thermal vias 3

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper 1,2,3,4 IP+ Sensed current copper conduction path pins. Terminals for current being sensed; 4

CAD (KiCad official)

  • Symbol: ACS710KLATR-25CB-T
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: acs710klatr-25cb-t-etched.step / acs710klatr-25cb-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); acs710klatr-25cb-t.step / acs710klatr-25cb-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Allegro MicroSystems, LLC datasheet (23 pp, sha256 c2acc798fe0eefb1, retrieved 2026-11-11, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF