component
ACS710KLATR-25CB-NL-T
Public Made by Adomby adom
Allegro MicroSystems, LLC Current Sensors, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244
{
"slug": "acs710klatr-25cb-nl-t",
"version": "0.1.0",
"type": "component",
"description": "Allegro MicroSystems, LLC Current Sensors, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"sensors",
"acs710klatr-25cb-nl-t",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"acs710klatr-25cb-nl-t.kicad_sym",
"acs710klatr-25cb-nl-t.kicad_mod",
"acs710klatr-25cb-nl-t.glb",
"acs710klatr-25cb-nl-t.step",
"acs710klatr-25cb-nl-t.lbr",
"docs/hero.png",
"docs/acs710klatr-25cb-nl-t-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"acs710klatr-25cb-nl-t-hero.glb",
"acs710klatr-25cb-nl-t-hero.overlay.json",
"acs710klatr-25cb-nl-t-etched.glb"
],
"component": {
"mpn": "ACS710KLATR-25CB-NL-T",
"manufacturer": "Allegro MicroSystems, LLC",
"package": "SOIC-16",
"pin_count": 16,
"category": "Sensors",
"subcategory": "Current Sensors",
"datasheet": "https://datasheet.lcsc.com/datasheet/pdf/191ae28ba52e6a6670e956fbb83c24c9.pdf",
"parts": {
"symbol": "acs710klatr-25cb-nl-t.kicad_sym",
"footprint": "acs710klatr-25cb-nl-t.kicad_mod",
"model_3d": "acs710klatr-25cb-nl-t-hero.glb",
"model_3d_plain": "acs710klatr-25cb-nl-t-etched.glb",
"model_3d_step": "acs710klatr-25cb-nl-t-etched.step",
"model_3d_step_plain": "acs710klatr-25cb-nl-t.step",
"lbr": "acs710klatr-25cb-nl-t.lbr"
},
"distributor_links": {
"lcsc": "C7066692",
"digikey": "620-1529-2-ND",
"mouser": "250-710KLATR25CBNLT"
},
"distributor_check": {
"checked_at": "2026-10-29T02:47:32Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "620-1529-2-ND",
"status": "found",
"lifecycle": "Not For New Designs"
},
"mouser": {
"pn": "250-710KLATR25CBNLT",
"status": "found",
"lifecycle": "Not Recommended for New Designs"
}
},
"pins": [
{
"number": "1",
"name": "IP+",
"type": "passive",
"description": "Sensed current copper conduction path pin, fused internally and looped to the IP- pins, for unidirectional or bidirectional current flow."
},
{
"number": "2",
"name": "IP+",
"type": "passive",
"description": "Sensed current copper conduction path pin, fused internally and looped to the IP- pins, for unidirectional or bidirectional current flow."
},
{
"number": "3",
"name": "IP+",
"type": "passive",
"description": "Sensed current copper conduction path pin, fused internally and looped to the IP- pins, for unidirectional or bidirectional current flow."
},
{
"number": "4",
"name": "IP+",
"type": "passive",
"description": "Sensed current copper conduction path pin, fused internally and looped to the IP- pins, for unidirectional or bidirectional current flow."
},
{
"number": "5",
"name": "IP–",
"type": "passive",
"description": "Sensed current copper conduction path pin, fused internally and looped to the IP+ pins, for unidirectional or bidirectional current flow."
},
{
"number": "6",
"name": "IP–",
"type": "passive",
"description": "Sensed current copper conduction path pin, fused internally and looped to the IP+ pins, for unidirectional or bidirectional current flow."
},
{
"number": "7",
"name": "IP–",
"type": "passive",
"description": "Sensed current copper conduction path pin, fused internally and looped to the IP+ pins, for unidirectional or bidirectional current flow."
},
{
"number": "8",
"name": "IP–",
"type": "passive",
"description": "Sensed current copper conduction path pin, fused internally and looped to the IP+ pins, for unidirectional or bidirectional current flow."
},
{
"number": "9",
"name": "GND",
"type": "power_in",
"description": "Device ground connection."
},
{
"number": "10",
"name": "VZCR",
"type": "output",
"description": "Voltage reference output giving the zero-current (0 A) reference, scaling with VCC; it is not a highly accurate reference."
},
{
"number": "11",
"name": "FILTER",
"type": "passive",
"description": "Filter pin for an external capacitor from this pin to GND that sets the device bandwidth."
},
{
"number": "12",
"name": "VIOUT",
"type": "output",
"description": "Analog output whose voltage is proportional to the current flowing through the loop between the IP+ and IP- pins."
},
{
"number": "13",
"name": "FAULT",
"type": "output",
"description": "Overcurrent fault pin (active-low, printed with an overbar) that transitions to a logic low when the current between IP+ and IP- exceeds the overcurrent fault threshold; open drain per the electrical characteristics."
},
{
"number": "14",
"name": "VCC",
"type": "power_in",
"description": "Supply voltage, specified at 3 to 5.5 V."
},
{
"number": "15",
"name": "VOC",
"type": "input",
"description": "Overcurrent input whose analog voltage sets the overcurrent fault threshold, with a setting range of VCC × 0.25 to VCC × 0.4."
},
{
"number": "16",
"name": "FAULT_EN",
"type": "input",
"description": "Enables overcurrent faulting when high; input low threshold is 0.1×VCC maximum and high threshold is 0.8×VCC minimum."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The MPN ACS710KLATR-25CB-NL-T maps to the 16-pin SOIC package (suffix LA, shown on page 1). The K te; The Latching version pinout (page 4) differs from the Non-Latching version (page 5) only in the FAUL; Pin 13 is printed with an overbar (FAULT). The overbar could not be reproduced in plain text, so the"
],
"pages_sent": 6,
"cost_usd": 0.0569,
"at": "2026-10-29T02:47:14"
},
"datasheet": {
"url": "https://datasheet.lcsc.com/datasheet/pdf/191ae28ba52e6a6670e956fbb83c24c9.pdf",
"pages": 23,
"sha256": "f31395d6fef8347b",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "acs710klatr-25cb-nl-t.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
9.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
"checked": "2026-10-29",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "acs710klatr-25cb-nl-t-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
6.0,
9.9,
1.75
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "ad48cd763e3371a31930481a7235df771a924143445f46396216ada695017d95",
"checked": "2026-10-29",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}