main
Ray Publish 0.1.0 98e40f0
{
  "slug": "acs710klatr-12cb-nl-t",
  "version": "0.1.0",
  "type": "component",
  "description": "Allegro MicroSystems, LLC Current Sensors, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensors",
    "acs710klatr-12cb-nl-t",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "acs710klatr-12cb-nl-t.kicad_sym",
    "acs710klatr-12cb-nl-t.kicad_mod",
    "acs710klatr-12cb-nl-t.glb",
    "acs710klatr-12cb-nl-t.step",
    "acs710klatr-12cb-nl-t.lbr",
    "docs/hero.png",
    "docs/acs710klatr-12cb-nl-t-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "acs710klatr-12cb-nl-t-hero.glb",
    "acs710klatr-12cb-nl-t-hero.overlay.json",
    "acs710klatr-12cb-nl-t-etched.glb"
  ],
  "component": {
    "mpn": "ACS710KLATR-12CB-NL-T",
    "manufacturer": "Allegro MicroSystems, LLC",
    "package": "SOIC-16-300mil",
    "pin_count": 16,
    "category": "Sensors",
    "subcategory": "Current Sensors",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/848f487bb94d491887ae42a290bc3644.pdf",
    "parts": {
      "symbol": "acs710klatr-12cb-nl-t.kicad_sym",
      "footprint": "acs710klatr-12cb-nl-t.kicad_mod",
      "model_3d": "acs710klatr-12cb-nl-t-hero.glb",
      "model_3d_plain": "acs710klatr-12cb-nl-t-etched.glb",
      "model_3d_step": "acs710klatr-12cb-nl-t-etched.step",
      "model_3d_step_plain": "acs710klatr-12cb-nl-t.step",
      "lbr": "acs710klatr-12cb-nl-t.lbr"
    },
    "distributor_links": {
      "lcsc": "C163259",
      "digikey": "620-1528-2-ND",
      "mouser": "250-710KLATR12CBNLT"
    },
    "distributor_check": {
      "checked_at": "2026-11-11T00:14:18Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "620-1528-2-ND",
        "status": "found",
        "lifecycle": "Not For New Designs"
      },
      "mouser": {
        "pn": "250-710KLATR12CBNLT",
        "status": "found",
        "lifecycle": "Not Recommended for New Designs"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IP+",
        "type": "passive",
        "description": "Sensed current copper conduction path pin; terminal for the current being sensed, fused internally and looped to the IP- pins, for unidirectional or bidirectional current flow."
      },
      {
        "number": "2",
        "name": "IP+",
        "type": "passive",
        "description": "Sensed current copper conduction path pin; terminal for the current being sensed, fused internally and looped to the IP- pins, for unidirectional or bidirectional current flow."
      },
      {
        "number": "3",
        "name": "IP+",
        "type": "passive",
        "description": "Sensed current copper conduction path pin; terminal for the current being sensed, fused internally and looped to the IP- pins, for unidirectional or bidirectional current flow."
      },
      {
        "number": "4",
        "name": "IP+",
        "type": "passive",
        "description": "Sensed current copper conduction path pin; terminal for the current being sensed, fused internally and looped to the IP- pins, for unidirectional or bidirectional current flow."
      },
      {
        "number": "5",
        "name": "IP–",
        "type": "passive",
        "description": "Sensed current copper conduction path pin; terminal for the current being sensed, fused internally and looped to the IP+ pins, for unidirectional or bidirectional current flow."
      },
      {
        "number": "6",
        "name": "IP–",
        "type": "passive",
        "description": "Sensed current copper conduction path pin; terminal for the current being sensed, fused internally and looped to the IP+ pins, for unidirectional or bidirectional current flow."
      },
      {
        "number": "7",
        "name": "IP–",
        "type": "passive",
        "description": "Sensed current copper conduction path pin; terminal for the current being sensed, fused internally and looped to the IP+ pins, for unidirectional or bidirectional current flow."
      },
      {
        "number": "8",
        "name": "IP–",
        "type": "passive",
        "description": "Sensed current copper conduction path pin; terminal for the current being sensed, fused internally and looped to the IP+ pins, for unidirectional or bidirectional current flow."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground connection."
      },
      {
        "number": "10",
        "name": "VZCR",
        "type": "output",
        "description": "Voltage reference output giving the zero-current (0 A) reference, scaling with VCC; it is not a highly accurate reference, with a source load up to 3 mA and a sink load of at least 50 µA."
      },
      {
        "number": "11",
        "name": "FILTER",
        "type": "passive",
        "description": "Filter pin; connect an external capacitor from this pin to GND to set the device bandwidth (internal filter resistance RF(INT) typically 1.7 kΩ)."
      },
      {
        "number": "12",
        "name": "VIOUT",
        "type": "output",
        "description": "Analog output whose voltage is proportional to the current through the IP+ to IP- loop; the datasheet limits the load to at most 10 nF to GND and at least 10 kΩ to GND."
      },
      {
        "number": "13",
        "name": "FAULT",
        "type": "output",
        "description": "Overcurrent fault pin (open drain, active low); it transitions to logic low when the current between IP+ and IP- exceeds the overcurrent fault threshold, with VOL of at most 0.4 V at 1 mA sink current."
      },
      {
        "number": "14",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage, specified at 3 to 5.5 V; the device is programmed for maximum accuracy at VCC = 5 V."
      },
      {
        "number": "15",
        "name": "VOC",
        "type": "input",
        "description": "Overcurrent input; the analog voltage on this pin sets the overcurrent fault threshold, with a setting range of 0.25 × VCC to 0.4 × VCC."
      },
      {
        "number": "16",
        "name": "FAULT_EN",
        "type": "input",
        "description": "Enables overcurrent faulting when high; input low threshold is 0.1 × VCC maximum and input high threshold is 0.8 × VCC minimum."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet is marked 'Not for New Design' (status change June 5, 2017); sale is restricted to exi; The MPN ends in -NL-T, while the selection guide lists the orderable part as ACS710KLATR-12CB-NL-T2 ; The datasheet gives no pin-type classification for the pins. The types were assigned from the functi"
        ],
        "pages_sent": 24,
        "cost_usd": 0.1253,
        "at": "2026-11-11T00:14:00"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/848f487bb94d491887ae42a290bc3644.pdf",
        "pages": 24,
        "sha256": "601c2523d8411c10",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "acs710klatr-12cb-nl-t.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "acs710klatr-12cb-nl-t-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "bfc49b71c0f266a9c2171090b1e1b2331225be7baaac6d8b9cb846404c422311",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "LA",
      "source_page": 23,
      "D": {
        "nom_mm": 10.3,
        "range_mm": [
          10.1,
          10.5
        ]
      },
      "E1": {
        "nom_mm": 7.5,
        "range_mm": [
          7.4,
          7.6
        ]
      },
      "E": {
        "nom_mm": 10.3,
        "range_mm": [
          9.97,
          10.63
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 2.65,
        "range_mm": [
          null,
          2.65
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "acs710klatr-12cb-nl-t.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}