3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownACS710KLATR-12CB-NL-T
Allegro MicroSystems, LLC · Current Sensors · SOIC-16-300mil
ACS710KLATR-12CB-NL-T from Allegro MicroSystems, LLC, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IP+ | passive | Sensed current copper conduction path pin; terminal for the current being sensed, fused internally and looped to the IP- pins, for unidirectional or bidirectional current flow. |
| 2 | IP+ | passive | Sensed current copper conduction path pin; terminal for the current being sensed, fused internally and looped to the IP- pins, for unidirectional or bidirectional current flow. |
| 3 | IP+ | passive | Sensed current copper conduction path pin; terminal for the current being sensed, fused internally and looped to the IP- pins, for unidirectional or bidirectional current flow. |
| 4 | IP+ | passive | Sensed current copper conduction path pin; terminal for the current being sensed, fused internally and looped to the IP- pins, for unidirectional or bidirectional current flow. |
| 5 | IP- | passive | Sensed current copper conduction path pin; terminal for the current being sensed, fused internally and looped to the IP+ pins, for unidirectional or bidirectional current flow. |
| 6 | IP- | passive | Sensed current copper conduction path pin; terminal for the current being sensed, fused internally and looped to the IP+ pins, for unidirectional or bidirectional current flow. |
| 7 | IP- | passive | Sensed current copper conduction path pin; terminal for the current being sensed, fused internally and looped to the IP+ pins, for unidirectional or bidirectional current flow. |
| 8 | IP- | passive | Sensed current copper conduction path pin; terminal for the current being sensed, fused internally and looped to the IP+ pins, for unidirectional or bidirectional current flow. |
| 9 | GND | power_in | Device ground connection. |
| 10 | VZCR | output | Voltage reference output giving the zero-current (0 A) reference, scaling with VCC; it is not a highly accurate reference, with a source load up to 3 mA and a sink load of at least 50 µA. |
| 11 | FILTER | passive | Filter pin; connect an external capacitor from this pin to GND to set the device bandwidth (internal filter resistance RF(INT) typically 1.7 kΩ). |
| 12 | VIOUT | output | Analog output whose voltage is proportional to the current through the IP+ to IP- loop; the datasheet limits the load to at most 10 nF to GND and at least 10 kΩ to GND. |
| 13 | FAULT | output | Overcurrent fault pin (open drain, active low); it transitions to logic low when the current between IP+ and IP- exceeds the overcurrent fault threshold, with VOL of at most 0.4 V at 1 mA sink current. |
| 14 | VCC | power_in | Supply voltage, specified at 3 to 5.5 V; the device is programmed for maximum accuracy at VCC = 5 V. |
| 15 | VOC | input | Overcurrent input; the analog voltage on this pin sets the overcurrent fault threshold, with a setting range of 0.25 × VCC to 0.4 × VCC. |
| 16 | FAULT_EN | input | Enables overcurrent faulting when high; input low threshold is 0.1 × VCC maximum and input high threshold is 0.8 × VCC minimum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Allegro MicroSystems, LLC |
| Package | SOIC-16-300mil |
| Category | Sensors |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 8 | V | 4 | |||
| Filter Pin | VFILTER | 8 | V | 4 | |||
| Analog Output Pin | VIOUT | 32 | V | 4 | |||
| Overcurrent Input Pin | VOC | 8 | V | 4 | |||
| Overcurrent FAULT Pin | VFAULT | 8 | V | 4 | |||
| Fault Enable (FAULT_EN) Pin | VFAULTEN | 8 | V | 4 | |||
| Voltage Reference Output Pin | VZCR | 8 | V | 4 | |||
| DC Reverse Voltage (VCC, FILTER, VIOUT, VOC, FAULT, FAULT_EN, VZCR pins) | VRdcx | -0.5 | V | 4 | |||
| Excess to Supply Voltage (FILTER, VIOUT, VOC, FAULT, FAULT_EN, VZCR pins) | VEX | 0.3 | V | Voltage by which pin voltage can exceed the VCC pin voltage | 4 | ||
| Output Current Source | IIOUT(Source) | 3 | mA | 4 | |||
| Output Current Sink | IIOUT(Sink) | 1 | mA | 4 | |||
| Operating Ambient Temperature | TA | -40 | 125 | °C | Range K | 4 | |
| Junction Temperature | TJ(max) | 165 | °C | 4 | |||
| Storage Temperature | Tstg | -65 | 170 | °C | 4 | ||
| Working Voltage for Basic Isolation | VWVBI | 870 | VPK or VDC | Maximum approved working voltage for basic isolation per IEC/UL 60950-1 (2nd Edition) | 4 | ||
| Working Voltage for Basic Isolation | VWVBI | 616 | VRMS | Maximum approved working voltage for basic isolation per IEC/UL 60950-1 (2nd Edition) | 4 | ||
| Clearance | DCL | 7.5 | mm | Minimum distance through air from IP leads to signal leads | 4 | ||
| Creepage | DCR | 7.5 | mm | Minimum distance along package body from IP leads to signal leads | 4 | ||
| Supply Voltage | VCC | 3 | 5.5 | V | 7 | ||
| Supply Current | ICC | 11 | 14.5 | mA | VIOUT open, FAULT pin high | 7 | |
| Output Capacitance Load | CLOAD | 10 | nF | VIOUT pin to GND | 7 | ||
| Output Resistive Load | RLOAD | 10 | kΩ | VIOUT pin to GND | 7 | ||
| Full Range Linearity | ELIN | -0.75 | 0.25 | 0.75 | % | IP = ±IPOA | 7 |
| Symmetry | ESYM | 99.1 | 100 | 100.9 | % | IP = ±IPOA | 7 |
| Signal Noise at Overcurrent Comparator Input | INCOMP | -1 | 1 | A | 7 | ||
| Overcurrent Fault Switchpoint Error | EOC | -5 | 5 | % | Switchpoint in VOC safe operating area; assumes INCOMP = 0 A | 7 | |
| Overcurrent FAULT Pin Output Voltage | VFAULT | 0.4 | V | 1 mA sink current at FAULT pin | 7 | ||
| Overcurrent Input Pin Resistance | ROC | 2 | MΩ | TA = 25°C, VOC pin to GND | 8 | ||
| Voltage Reference Output Load Current | IZCR | 3 | mA | Source current | 8 | ||
| Voltage Reference Output Load Current | IZCR | 50 | µA | Sink current | 8 | ||
| Voltage Reference Output Drift | ΔVZCR | -10 | 10 | mV | 8 | ||
| Total Output Error (X12CB) | ETOT | -2.2 | 2.2 | % | Over full scale of IPOA, IP applied for 5 ms, TA = 25°C to 125°C | 9 | |
| Total Output Error (X12CB) | ETOT | -3.9 | 3.9 | % | Over full scale of IPOA, IP applied for 5 ms, TA = -40°C to 25°C | 9 | |
| Optimized Accuracy Range (X12CB) | IPOA | -12.5 | 12.5 | A | 9 | ||
| Linear Sensing Range (X12CB) | IR | -37.5 | 37.5 | A | 9 | ||
| Electrical Offset Voltage Variation Relative to VOUT(QBI) (X12CB) | VOE | -4 | 4 | mV | IP = 0 A, TA = 25°C | 9 | |
| Electrical Offset Voltage Variation Relative to VOUT(QBI) (X12CB) | VOE | -14 | 14 | mV | IP = 0 A, TA = 25°C to 125°C | 9 | |
| Electrical Offset Voltage Variation Relative to VOUT(QBI) (X12CB) | VOE | -23 | 23 | mV | IP = 0 A, TA = -40°C to 25°C | 9 | |
| Package Thermal Resistance | RθJA | 17 | ºC/W | Mounted on Allegro demo board, 1332 mm2 of 2 oz. copper, thermal vias to primary leadframe | 4 | ||
| Nominal Supply Voltage | VCCN | 5 | V | 7 | |||
| Magnetic Coupling from Device Conductor to Hall Element | MCHALL | 9.5 | G/A | Current flowing from IP+ to IP- pins | 7 | ||
| Internal Filter Resistance | RF(INT) | 1.7 | kΩ | 7 | |||
| Primary Conductor Resistance | RPRIMARY | 1 | mΩ | TA = 25°C | 7 | ||
| Noise Density | IND | 400 | µA/√(Hz) | Input-referenced noise density; TA = 25°C, CL = 4.7 nF | 7 | ||
| Noise | IN | 170 | mArms | Input referenced noise at 120 kHz Bandwidth; TA = 25°C, CL = 4.7 nF | 7 | ||
| VIOUT Signal Rise Time | tr | 3 | μs | TA = 25°C, swing IP from 0 A to IPOA, no capacitor on FILTER pin, 100 pF from VIOUT to GND | 7 | ||
| VIOUT Signal Propagation Time | tPROP | 1 | μs | TA = 25°C, no capacitor on FILTER pin, 100 pF from VIOUT to GND | 7 | ||
| VIOUT Signal Response Time | tRESPONSE | 4 | μs | TA = 25°C, swing IP from 0 A to IPOA, no capacitor on FILTER pin, 100 pF from VIOUT to GND | 7 | ||
| VIOUT Large Signal Bandwidth | f3dB | 120 | kHz | -3 dB, VIOUT = 1 Vpk-pk, no capacitor on FILTER pin, 100 pF from VIOUT to GND | 7 | ||
| Power-On Time | tPO | 35 | μs | Output reaches 90% of steady-state level, no capacitor on FILTER pin, TA = 25°C | 7 | ||
| Overcurrent Fault Response Time | tOC | 1.9 | μs | FAULT_EN high for at least 20 µs before event; switchpoint VOC = 0.25 × VCC; without external COC | 8 | ||
| Fault Enable (FAULT_EN Pin) Delay | tFED | 15 | μs | FAULT_EN low, VOC = 0.25 × VCC, COC = 0 F; DC IP above threshold; FAULT_EN reset high, delay to FAULT falling edge | 8 | ||
| Fault Enable (FAULT_EN Pin) Delay (Non-Latching versions) | tFED(NL) | 150 | ns | Same test as tFED | 8 | ||
| Undercurrent Fault Response Time (Non-Latching versions) | tUC | 3 | μs | FAULT_EN high for at least 20 µs before event; VOC = 0.25 × VCC; without COC, RPU = 330 kΩ | 8 | ||
| Overcurrent Fault Reset Delay | tOCR | 500 | ns | Time from VFAULTEN < VIL to VFAULT > 0.8 × VCC, RPU = 330 kΩ | 8 | ||
| Overcurrent Fault Reset Hold Time | tOCH | 250 | ns | Time from VFAULTEN < VIL to rising edge of VFAULT | 8 | ||
| Sensitivity (X12CB) | Sens | 56 | mV/A | IP = 12.5 A, TA = 25°C | 9 | ||
| Sensitivity (X12CB) | Sens | 57 | mV/A | IP = 12.5 A, TA = -40°C to 25°C | 9 | ||
| Noise (X12CB) | VNOISE(rms) | 1.5 | mV | TA = 25°C, Sens = 56 mV/A, CF = 0, CLOAD = 4.7 nF, RLOAD open | 9 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | 1,2,3,4 IP+ Sensed current copper conduction path pins. Terminals for current being sensed; | 5 |
CAD (KiCad official)
- Symbol:
ACS710KLATR-12CB-NL-T - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
acs710klatr-12cb-nl-t-etched.step/acs710klatr-12cb-nl-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);acs710klatr-12cb-nl-t.step/acs710klatr-12cb-nl-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Allegro MicroSystems, LLC datasheet (24 pp, sha256
601c2523d8411c10, retrieved 2026-11-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).