main
Ray Publish 0.1.0 816c1a6
{
  "slug": "acs37002lmcatr-050u5",
  "version": "0.1.0",
  "type": "component",
  "description": "Allegro MicroSystems, LLC Current Sensors, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensors",
    "acs37002lmcatr-050u5",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "acs37002lmcatr-050u5.kicad_sym",
    "acs37002lmcatr-050u5.kicad_mod",
    "acs37002lmcatr-050u5.glb",
    "acs37002lmcatr-050u5.step",
    "acs37002lmcatr-050u5.lbr",
    "docs/hero.png",
    "docs/acs37002lmcatr-050u5-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "acs37002lmcatr-050u5-hero.glb",
    "acs37002lmcatr-050u5-hero.overlay.json",
    "acs37002lmcatr-050u5-etched.glb"
  ],
  "component": {
    "mpn": "ACS37002LMCATR-050U5",
    "manufacturer": "Allegro MicroSystems, LLC",
    "package": "SOIC-16-300mil",
    "pin_count": 16,
    "category": "Sensors",
    "subcategory": "Current Sensors",
    "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/e1b553028aaa68f84bf14ca2d49b6e21.pdf",
    "parts": {
      "symbol": "acs37002lmcatr-050u5.kicad_sym",
      "footprint": "acs37002lmcatr-050u5.kicad_mod",
      "model_3d": "acs37002lmcatr-050u5-hero.glb",
      "model_3d_plain": "acs37002lmcatr-050u5-etched.glb",
      "model_3d_step": "acs37002lmcatr-050u5-etched.step",
      "model_3d_step_plain": "acs37002lmcatr-050u5.step",
      "lbr": "acs37002lmcatr-050u5.lbr"
    },
    "distributor_links": {
      "lcsc": "C7455397",
      "digikey": "620-ACS37002LMCATR-050U5TR-ND",
      "mouser": "250-2LMCA-050U5"
    },
    "distributor_check": {
      "checked_at": "2026-11-11T00:09:12Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "620-ACS37002LMCATR-050U5TR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "250-2LMCA-050U5",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "IP+",
        "type": "passive",
        "description": "Terminal for the current being sensed (primary conductor), fused internally."
      },
      {
        "number": "2",
        "name": "IP+",
        "type": "passive",
        "description": "Terminal for the current being sensed (primary conductor), fused internally."
      },
      {
        "number": "3",
        "name": "IP+",
        "type": "passive",
        "description": "Terminal for the current being sensed (primary conductor), fused internally."
      },
      {
        "number": "4",
        "name": "IP+",
        "type": "passive",
        "description": "Terminal for the current being sensed (primary conductor), fused internally."
      },
      {
        "number": "5",
        "name": "IP-",
        "type": "passive",
        "description": "Terminal for the current being sensed (primary conductor), fused internally."
      },
      {
        "number": "6",
        "name": "IP-",
        "type": "passive",
        "description": "Terminal for the current being sensed (primary conductor), fused internally."
      },
      {
        "number": "7",
        "name": "IP-",
        "type": "passive",
        "description": "Terminal for the current being sensed (primary conductor), fused internally."
      },
      {
        "number": "8",
        "name": "IP-",
        "type": "passive",
        "description": "Terminal for the current being sensed (primary conductor), fused internally."
      },
      {
        "number": "9",
        "name": "OCF",
        "type": "output",
        "description": "Active-low open-drain overcurrent fault output; with a 4.7 kΩ pull-up (RPU range 4.7 kΩ to 500 kΩ) its on-voltage is 0.4 V max under fault."
      },
      {
        "number": "10",
        "name": "VCC",
        "type": "power_in",
        "description": "Device power supply; 4.5 V to 5.5 V for 5 V devices and 3.15 V to 3.6 V for 3.3 V devices, with 0.1 µF bypass to GND recommended."
      },
      {
        "number": "11",
        "name": "VREF",
        "type": "power_in",
        "description": "Zero-current voltage reference output (0.5 V nominal for unidirectional at 5 V VCC); limited to 25 mA passive source/sink, requires a resistive load of at least 10 kΩ and a capacitive load of at most 6 nF."
      },
      {
        "number": "12",
        "name": "VIOUT",
        "type": "output",
        "description": "Analog output representing the current through IP; 5 V linear output operating range is 0.5 V to 4.5 V, output current limited to 25 mA, with RL of at least 10 kΩ and CL of at most 6 nF."
      },
      {
        "number": "13",
        "name": "VOC",
        "type": "input",
        "description": "Overcurrent fault operating point input; 0.5 V to 2 V sets the trip point at 5 V VCC (0.33 V to 1.32 V at 3.3 V VCC), and VOC below 0.1 V selects the internal EEPROM fault level."
      },
      {
        "number": "14",
        "name": "GAIN_SEL_1",
        "type": "input",
        "description": "Gain selection bit 1, latched at startup; at 5 V VCC logic high requires 3.75 V min and logic low 0.5 V max, with an internal 1 MΩ pull-down to GND."
      },
      {
        "number": "15",
        "name": "GND",
        "type": "power_in",
        "description": "Device ground terminal."
      },
      {
        "number": "16",
        "name": "GAIN_SEL_0",
        "type": "input",
        "description": "Gain selection bit 0, latched at startup; at 5 V VCC logic high requires 3.75 V min and logic low 0.5 V max, with an internal 1 MΩ pull-down to GND."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet gives no ERC type for the IP+/IP- primary-conductor terminals; 'passive' was assigned ; OCF is an open-drain output, which has no direct KiCad ERC class; 'output' was used as the closest m; VREF and VIOUT are analog outputs; 'output' was assigned by function, and the electrical limits quot"
        ],
        "pages_sent": 32,
        "cost_usd": 0.184,
        "at": "2026-11-11T00:08:58"
      },
      "datasheet": {
        "url": "https://datasheet.lcsc.com/datasheet/pdf/e1b553028aaa68f84bf14ca2d49b6e21.pdf",
        "pages": 32,
        "sha256": "0221e9aa81fa89cd",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "acs37002lmcatr-050u5.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "acs37002lmcatr-050u5-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7b85955b58b3265875fd45030cce4f88e9295254b286824fbb0d10cccf9c835e",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}