main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers acs37002lmcatr-050u5: viewers rendered from the public page · Ray
acs37002lmcatr-050u5-etched.glb Publish 0.1.0 · Ray
acs37002lmcatr-050u5-etched.step acs37002lmcatr-050u5: factory component page (tier=lcsc) · Ray
acs37002lmcatr-050u5-hero.glb acs37002lmcatr-050u5: hero GLB from the etched model (keeps the MPN mark) · Ray
acs37002lmcatr-050u5-hero.overlay.json Publish 0.1.0 · Ray
acs37002lmcatr-050u5.glb Publish 0.1.0 · Ray
acs37002lmcatr-050u5.kicad_mod Publish 0.1.0 · Ray
acs37002lmcatr-050u5.kicad_sym Publish 0.1.0 · Ray
acs37002lmcatr-050u5.lbr Publish 0.1.0 · Ray
acs37002lmcatr-050u5.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 16 pins · Ray

ACS37002LMCATR-050U5

Allegro MicroSystems, LLC · Current Sensors · SOIC-16-300mil

ACS37002LMCATR-050U5 from Allegro MicroSystems, LLC, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IP+ passive Terminal for the current being sensed (primary conductor), fused internally.
2 IP+ passive Terminal for the current being sensed (primary conductor), fused internally.
3 IP+ passive Terminal for the current being sensed (primary conductor), fused internally.
4 IP+ passive Terminal for the current being sensed (primary conductor), fused internally.
5 IP- passive Terminal for the current being sensed (primary conductor), fused internally.
6 IP- passive Terminal for the current being sensed (primary conductor), fused internally.
7 IP- passive Terminal for the current being sensed (primary conductor), fused internally.
8 IP- passive Terminal for the current being sensed (primary conductor), fused internally.
9 OCF output Active-low open-drain overcurrent fault output; with a 4.7 kΩ pull-up (RPU range 4.7 kΩ to 500 kΩ) its on-voltage is 0.4 V max under fault.
10 VCC power_in Device power supply; 4.5 V to 5.5 V for 5 V devices and 3.15 V to 3.6 V for 3.3 V devices, with 0.1 µF bypass to GND recommended.
11 VREF power_in Zero-current voltage reference output (0.5 V nominal for unidirectional at 5 V VCC); limited to 25 mA passive source/sink, requires a resistive load of at least 10 kΩ and a capacitive load of at most 6 nF.
12 VIOUT output Analog output representing the current through IP; 5 V linear output operating range is 0.5 V to 4.5 V, output current limited to 25 mA, with RL of at least 10 kΩ and CL of at most 6 nF.
13 VOC input Overcurrent fault operating point input; 0.5 V to 2 V sets the trip point at 5 V VCC (0.33 V to 1.32 V at 3.3 V VCC), and VOC below 0.1 V selects the internal EEPROM fault level.
14 GAIN_SEL_1 input Gain selection bit 1, latched at startup; at 5 V VCC logic high requires 3.75 V min and logic low 0.5 V max, with an internal 1 MΩ pull-down to GND.
15 GND power_in Device ground terminal.
16 GAIN_SEL_0 input Gain selection bit 0, latched at startup; at 5 V VCC logic high requires 3.75 V min and logic low 0.5 V max, with an internal 1 MΩ pull-down to GND.

Key specifications

Parameter Value
Manufacturer Allegro MicroSystems, LLC
Package SOIC-16-300mil
Category Sensors
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC 4.5 5 5.5 V 5 V devices only 7
Supply Current ICC 13 18 mA No load on VIOUT or VREF; VCC = 5 V 7
Supply Bypass Capacitor CBYPASS 0.1 µF VCC to GND recommended 7
Output Resistive Load RL 10 kΩ VIOUT to GND, VIOUT to VCC 7
Output Capacitive Load CL 1 6 nF VIOUT to GND 7
Reference Resistive Load RVREF 10 62.7 kΩ VREF to GND (recommended to supply VOC); VREF to VCC 7
Reference Capacitive Load CVREF 6 nF VREF to GND 7
Fault Pull-Up Resistance RPU 4.7 500 kΩ 7
Power-On Reset Voltage VCC rising VPOR(H) 2.6 2.9 3.1 V VCC rising [1] 7
Power-On Reset Voltage VCC falling VPOR(L) 2.2 2.5 2.8 V VCC falling [1] 7
Power-On Time tPOD 100 µs Time from VCC rising ≥ VPOR(H) after a POR event until power-on; VREF, OCF, VIOUT 7
Overvoltage Detection Threshold VCC rising VOVD(H) 6.1 6.4 6.8 V VCC rising [1] 7
Overvoltage Detection Threshold VCC falling VOVD(L) 5.6 5.8 6.1 V VCC falling [1] 7
OVD Delay Time enable tdOVD(E) 60 82 120 µs Time from VCC rising ≥ VOVD(EN) until OVD asserts 7
Saturation Voltage low VSAT(L) 0.15 V RL = 10 kΩ to VCC 8
Output Operating Range 5 V linear VOOR 0.5 4.5 V 5 V linear operating range 8
Response Time tRESPONSE 1.1 2.5 µs TA = 25°C, CL = 5.7 nF, 90% input to 90% of 1 V output swing 8
Power Supply Offset Error VOE(PS) -18 18 mV Unidirectional; VCC @ VCC(MIN) or VCC(MAX) 8
Power Supply Sensitivity Error ESENS(PS) -1.5 1.5 % VCC @ VCC(MIN) or VCC(MAX) 8
Nonlinearity ELIN -0.75 0.75 % 8
Zero Current Reference Voltage Unidirectional 5 V VREF 0.49 0.5 0.51 V Unidirectional; VCC = 5 V 9
OCF On Voltage VFAULT-ON 0.07 0.4 V RPU = 4.7 kΩ, under fault condition 9
OCF Sink Current fault asserted IOCF(snk) 0.01 1.1 mA Fault Asserted 9
VOC Operating Voltage Range 5 V VVOC 0.5 2 V VCC = 5 V 9
Fault Error EOCF -10 10 %IOCF-OP 9
OCF Response Time tOCF 1 1.5 µs Time from IOCF-OP, with a 1.2 × IOCF-OP until fault asserts 9
OCF Reaction Time tOCF-R 0.75 1 µs Time from IOCF-OP - IOCF(HYS), until fault releases 9
GAIN_SEL Logic Input Voltage high VH(SEL) 3.75 V VCC = 5 V 9
GAIN_SEL Logic Input Voltage low VL(SEL) 0.5 V VCC = 5 V 9
Current Sensing Range IPR 0 50 A Gain Sel 00 13
Current Sensing Range IPR 0 40 A Gain Sel 01 13
Current Sensing Range IPR 0 33.3 A Gain Sel 10 13
Current Sensing Range IPR 0 66.7 A Gain Sel 11 13
Overcurrent Fault Operating Range IOCF-OR 25 50 100 %FS Typ. = factory-programmed default, FS = Full-Scale 13
Total Error ETOT -1.75 1.75 % IP = IPR(max) 13
Sensitivity Error ESENS -1.5 1.5 % IP = IPR(max), TA = 25°C to 150°C or -40°C to 25°C 13
Zero Current Reference Error VRE -10 -1 10 mV VREFactual, VREFideal, IP = 0 A, TA = 25°C to 150°C 13
Offset Error VOE -8 -1 8 mV VIOUT(Q), VREF, IP = 0 A, TA = 25°C to 150°C 13
QVO Error VQE -10 -2 10 mV VIOUT(Q), IP = 0 A, TA = 25°C to 150°C 13
Total Error Including Lifetime Drift ETOT_LTD -4.2 -0.8 4.2 % IP = IPR(max) 13
Sensitivity Error Including Lifetime Drift ESENS_LTD -4 -1.3 4 % IP = IPR(max) 13
Zero Current Reference Error Including Lifetime Drift VRE_LTD -10 -1 10 mV VREFactual, VREFideal, IP = 0 A, TA = 25°C to 150°C 13
Offset Error Including Lifetime Drift VOE_LTD -10 -1 10 mV VIOUT(Q), VREF, IP = 0 A, TA = 25°C to 150°C 13
Offset Error Including Lifetime Drift VOE_LTD -12 -1 12 mV VIOUT(Q), VREF, IP = 0 A, TA = -40°C to 25°C 13
QVO Error Including Lifetime Drift VQE_LTD -12 -2 12 mV VIOUT(Q), IP = 0 A, TA = 25°C to 150°C 13
Forward Supply Voltage VCC 6.5 V 4
Reverse Supply Voltage VRCC -0.5 V 4
Forward Output Voltage VOUT 6.5 V (VCC + 0.7) ≤ 6.5 V; applies to VIOUT, VOCF, and VREF 4
Reverse Output Voltage VROUT -0.5 V Applies to VIOUT, VOCF, and VREF 4
Forward Input Voltage VIN 6.5 V (VCC + 0.7) ≤ 6.5 V; applies to GAIN_SEL_0, GAIN_SEL_1, and VOC 4
Reverse Input Voltage VRIN -0.5 V Applies to GAIN_SEL_0, GAIN_SEL_1, and VOC 4
Operating Ambient Temperature TA -40 150 °C 4
Storage Temperature Tstg -65 165 °C 4
Maximum Junction Temperature TJ(max) 165 °C 4
Dielectric Strength Test Voltage VISO 5000 VRMS Agency type-tested for 60 seconds per UL 60950-1 (edition 2) and 62368-1 (edition 1) 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin Devices are RoHS compliant and lead (Pb) free with 100% matte-tin-plated leadframes. 1

CAD (KiCad official)

  • Symbol: ACS37002LMCATR-050U5
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: acs37002lmcatr-050u5-etched.step / acs37002lmcatr-050u5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); acs37002lmcatr-050u5.step / acs37002lmcatr-050u5.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Allegro MicroSystems, LLC datasheet (32 pp, sha256 0221e9aa81fa89cd, retrieved 2026-11-11, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF