ACPL-796H-500E
Public Made by Adomby adom
AVAGO(Broadcom) Optocouplers - Logic Output, SOP-16-300mil. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.
07da890
ACPL-796H-500E
AVAGO(Broadcom) · Optocouplers - Logic Output · SOP-16-300mil
ACPL-796H-500E from AVAGO(Broadcom), in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD1 | power_in | Supply voltage for signal input side (analog side), relative to GND1. |
| 2 | VIN+ | input | Positive analog input, recommended input range ±200 mV. |
| 3 | VIN- | input | Negative analog input, recommended input range ±200 mV (normally connected to GND1). Broadcom prints 'VIN-'. |
| 4 | GND1 | power_in | Supply ground for signal input side. |
| 5 | NC | no_connect | No connection. Leave floating. |
| 6 | NC | no_connect | No connection. Leave floating. |
| 7 | VDD1 | power_in | Supply voltage for signal input side (analog side), relative to GND1. |
| 8 | GND1 | power_in | Supply ground for signal input side. |
| 9 | GND2 | power_in | Supply ground for data output side (digital side). |
| 10 | NC | no_connect | No connection. Leave floating. |
| 11 | MDAT | output | Modulator data output. |
| 12 | NC | no_connect | No connection. Leave floating. |
| 13 | MCLKIN | input | Modulator clock input, 5 MHz to 20 MHz. |
| 14 | VDD2 | power_in | Supply voltage for data output side, relative to GND2. |
| 15 | NC | no_connect | No connection. Leave floating. |
| 16 | GND2 | power_in | Supply ground for data output side (digital side). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | AVAGO(Broadcom) |
| Package | SOP-16-300mil |
| Category | Optocoupler/LED/Digital Tube/Photoelectric Device |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient Operating Temperature | TA | -40 | 105 | °C | 5 | ||
| VDD1 Supply Voltage | VDD1 | 4.5 | 5.5 | V | 5 | ||
| VDD2 Supply Voltage | VDD2 | 3 | 5.5 | V | 5 | ||
| Analog Input Voltage | VIN+, VIN- | -200 | 200 | mV | Note 1: full scale signal input range ±320 mV | 5 | |
| Storage Temperature | TS | -55 | 125 | °C | 5 | ||
| Ambient Operating Temperature | TA | -40 | 105 | °C | 5 | ||
| Supply voltage | VDD1, VDD2 | -0.5 | 6 | V | 5 | ||
| Integral Nonlinearity | INL | -15 | 3 | 15 | LSB | TA = -40°C to +85°C; see Definitions section | 6 |
| Integral Nonlinearity | INL | -25 | 3 | 25 | LSB | TA = 85°C to 105°C | 6 |
| Integral Nonlinearity | INL | -25 | 25 | LSB | VIN+ = -250 mV to +250mV | 6 | |
| Differential Nonlinearity | DNL | -0.9 | 0.9 | LSB | No missing codes, guaranteed by design; see Definitions section | 6 | |
| Offset Error | VOS | -1 | 3 | 4.5 | mV | TA = -40°C to +105°C; see Definitions section | 6 |
| Offset Drift vs. Temperature | TCVOS | 3.5 | V/°C | 6 | |||
| Gain Error | GE | -2 | 2 | % | TA = -40°C to +105°C, VIN+ = -250 to +250 mV; see Definitions section | 6 | |
| Gain Error | GE | -1 | 1 | % | TA = 25°C, VIN+ = -250 to +250 mV | 6 | |
| Full-Scale Differential Voltage Input Range | FSR | -320 | 320 | mV | VIN = VIN+, VIN-; Note 2 | 6 | |
| Signal-to-Noise Ratio | SNR | 74 | 80 | dB | TA = -40°C to +105°C; see Definitions section | 6 | |
| Signal-to-(Noise + Distortion) Ratio | SNDR | 65 | 75 | dB | TA = -40°C to +105°C; see Definitions section | 6 | |
| Signal-to-(Noise + Distortion) Ratio | SNDR | 68 | 75 | dB | TA = -40°C to +85°C | 6 | |
| Signal-to-(Noise + Distortion) Ratio | SNDR | 65 | dB | TA = -40°C to +105°C, VIN+ = -250 mV to +250 mV | 6 | ||
| Input Current (digital inputs) | IIND | -0.5 | 0.5 | A | 6 | ||
| VDD1 Supply Current | IDD1 | 14 | 19 | mA | 6 | ||
| VDD2 Supply Current | IDD2 | 6 | 8 | mA | VDD2 = 5 V supply | 6 | |
| VDD2 Supply Current | IDD2 | 5 | 7 | mA | VDD2 = 3.3 V supply | 6 | |
| Modulator Clock Input Frequency | fMCLKIN | 5 | 10 | 20 | MHz | Clock duty cycle 40% to 60% | 7 |
| Data Delay After Rising Edge of MCLKIN | tD | 3 | 15 | ns | CL = 15 pF | 7 | |
| Offset Drift vs. VDD1 | 120 | V/V | 6 | ||||
| Gain Error Drift vs. Temperature | TCGE | 60 | ppm/°C | 6 | |||
| Gain Error Drift vs. VDD1 | 110 | V/V | 6 | ||||
| Average Input Bias Current | IINA | -0.5 | A | VDD1 = 5V, VDD2 = 5V, VIN+ = 0 V; Note 3 | 6 | ||
| Average Input Resistance | RIN | 33 | k | Across VIN+ or VIN- to GND1; Note 3 | 6 | ||
| Input Capacitance | CINA | 8 | pF | Across VIN+ or VIN- to GND1 | 6 | ||
| Effective Number of Bits | ENOB | 12 | Bits | see Definitions section | 6 | ||
| Isolation Transient Immunity | CMR | 25 | kV/V | VCM = 1 kV; See Definitions section | 6 | ||
| Common-Mode Rejection Ratio | CMRR | 74 | dB | 6 | |||
| Input Capacitance (digital) | CIND | 6 | pF | 6 | |||
| Output Low Voltage | VOL | 0.4 | V | IOUT = +200 A | 6 | ||
| Input-Output Momentary Withstand Voltage | VISO | 5000 | Vrms | RH ≤ 50%, t = 1 min; TA = 25°C | 7 | ||
| Input-Output Capacitance | CI-O | 1.4 | pF | f = 1 MHz | 7 | ||
| Input IC Junction-to-Ambient Thermal Resistance | θJAI | 83 | °C/W | 1 oz. trace, 2-layer PCB, still air, TA = 25°C | 7 | ||
| Output IC Junction-to-Ambient Thermal Resistance | θJAO | 85 | °C/W | 1 oz. trace, 2-layer PCB, still air, TA = 25°C | 7 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | in more detail shortly). Second, the leads are typically made from a material such as copper, which has a much | 14 |
CAD (Adom-generated)
- Symbol:
ACPL-796H-500E - Footprint:
Adom_Gen:AVAGO_Broadcom__ACPL-796_ae57c0 - 3D model: generated to fit the land (STEP)
- 3D model files:
acpl-796h-500e-etched.step/acpl-796h-500e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);acpl-796h-500e.step/acpl-796h-500e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: AVAGO(Broadcom) datasheet (16 pp, sha256
34278b54d33d340e, retrieved 2026-11-13, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Broadcom's printed LAND PATTERN RECOMMENDATION (p.3): pads 2.16 x 0.64, 11.63 outer span, 1.27 pitch, so pad centres at x +/-(11.63/2 - 2.16/2) = +/-4.735. Replaces KiCad SOIC-16W_7.5x10.3mm (2.05 x 0.6 at +/-4.65). Body 3.505 mm tall (taller than a JEDEC wide SOIC).
# ACPL-796H-500E
**AVAGO(Broadcom)** · Optocouplers - Logic Output · SOP-16-300mil
ACPL-796H-500E from AVAGO(Broadcom), in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD1 | power_in | Supply voltage for signal input side (analog side), relative to GND1. |
| 2 | VIN+ | input | Positive analog input, recommended input range ±200 mV. |
| 3 | VIN- | input | Negative analog input, recommended input range ±200 mV (normally connected to GND1). Broadcom prints 'VIN-'. |
| 4 | GND1 | power_in | Supply ground for signal input side. |
| 5 | NC | no_connect | No connection. Leave floating. |
| 6 | NC | no_connect | No connection. Leave floating. |
| 7 | VDD1 | power_in | Supply voltage for signal input side (analog side), relative to GND1. |
| 8 | GND1 | power_in | Supply ground for signal input side. |
| 9 | GND2 | power_in | Supply ground for data output side (digital side). |
| 10 | NC | no_connect | No connection. Leave floating. |
| 11 | MDAT | output | Modulator data output. |
| 12 | NC | no_connect | No connection. Leave floating. |
| 13 | MCLKIN | input | Modulator clock input, 5 MHz to 20 MHz. |
| 14 | VDD2 | power_in | Supply voltage for data output side, relative to GND2. |
| 15 | NC | no_connect | No connection. Leave floating. |
| 16 | GND2 | power_in | Supply ground for data output side (digital side). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | AVAGO(Broadcom) |
| Package | SOP-16-300mil |
| Category | Optocoupler/LED/Digital Tube/Photoelectric Device |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient Operating Temperature | TA | -40 | | 105 | °C | | 5 |
| VDD1 Supply Voltage | VDD1 | 4.5 | | 5.5 | V | | 5 |
| VDD2 Supply Voltage | VDD2 | 3 | | 5.5 | V | | 5 |
| Analog Input Voltage | VIN+, VIN- | -200 | | 200 | mV | Note 1: full scale signal input range ±320 mV | 5 |
| Storage Temperature | TS | -55 | | 125 | °C | | 5 |
| Ambient Operating Temperature | TA | -40 | | 105 | °C | | 5 |
| Supply voltage | VDD1, VDD2 | -0.5 | | 6 | V | | 5 |
| Integral Nonlinearity | INL | -15 | 3 | 15 | LSB | TA = -40°C to +85°C; see Definitions section | 6 |
| Integral Nonlinearity | INL | -25 | 3 | 25 | LSB | TA = 85°C to 105°C | 6 |
| Integral Nonlinearity | INL | -25 | | 25 | LSB | VIN+ = -250 mV to +250mV | 6 |
| Differential Nonlinearity | DNL | -0.9 | | 0.9 | LSB | No missing codes, guaranteed by design; see Definitions section | 6 |
| Offset Error | VOS | -1 | 3 | 4.5 | mV | TA = -40°C to +105°C; see Definitions section | 6 |
| Offset Drift vs. Temperature | TCVOS | | | 3.5 | V/°C | | 6 |
| Gain Error | GE | -2 | | 2 | % | TA = -40°C to +105°C, VIN+ = -250 to +250 mV; see Definitions section | 6 |
| Gain Error | GE | -1 | | 1 | % | TA = 25°C, VIN+ = -250 to +250 mV | 6 |
| Full-Scale Differential Voltage Input Range | FSR | -320 | | 320 | mV | VIN = VIN+, VIN-; Note 2 | 6 |
| Signal-to-Noise Ratio | SNR | 74 | 80 | | dB | TA = -40°C to +105°C; see Definitions section | 6 |
| Signal-to-(Noise + Distortion) Ratio | SNDR | 65 | 75 | | dB | TA = -40°C to +105°C; see Definitions section | 6 |
| Signal-to-(Noise + Distortion) Ratio | SNDR | 68 | 75 | | dB | TA = -40°C to +85°C | 6 |
| Signal-to-(Noise + Distortion) Ratio | SNDR | 65 | | | dB | TA = -40°C to +105°C, VIN+ = -250 mV to +250 mV | 6 |
| Input Current (digital inputs) | IIND | -0.5 | | 0.5 | A | | 6 |
| VDD1 Supply Current | IDD1 | | 14 | 19 | mA | | 6 |
| VDD2 Supply Current | IDD2 | | 6 | 8 | mA | VDD2 = 5 V supply | 6 |
| VDD2 Supply Current | IDD2 | | 5 | 7 | mA | VDD2 = 3.3 V supply | 6 |
| Modulator Clock Input Frequency | fMCLKIN | 5 | 10 | 20 | MHz | Clock duty cycle 40% to 60% | 7 |
| Data Delay After Rising Edge of MCLKIN | tD | 3 | | 15 | ns | CL = 15 pF | 7 |
| Offset Drift vs. VDD1 | | | 120 | | V/V | | 6 |
| Gain Error Drift vs. Temperature | TCGE | | 60 | | ppm/°C | | 6 |
| Gain Error Drift vs. VDD1 | | | 110 | | V/V | | 6 |
| Average Input Bias Current | IINA | | -0.5 | | A | VDD1 = 5V, VDD2 = 5V, VIN+ = 0 V; Note 3 | 6 |
| Average Input Resistance | RIN | | 33 | | k | Across VIN+ or VIN- to GND1; Note 3 | 6 |
| Input Capacitance | CINA | | 8 | | pF | Across VIN+ or VIN- to GND1 | 6 |
| Effective Number of Bits | ENOB | | 12 | | Bits | see Definitions section | 6 |
| Isolation Transient Immunity | CMR | | 25 | | kV/V | VCM = 1 kV; See Definitions section | 6 |
| Common-Mode Rejection Ratio | CMRR | | 74 | | dB | | 6 |
| Input Capacitance (digital) | CIND | | 6 | | pF | | 6 |
| Output Low Voltage | VOL | | 0.4 | | V | IOUT = +200 A | 6 |
| Input-Output Momentary Withstand Voltage | VISO | | 5000 | | Vrms | RH ≤ 50%, t = 1 min; TA = 25°C | 7 |
| Input-Output Capacitance | CI-O | | 1.4 | | pF | f = 1 MHz | 7 |
| Input IC Junction-to-Ambient Thermal Resistance | θJAI | | 83 | | °C/W | 1 oz. trace, 2-layer PCB, still air, TA = 25°C | 7 |
| Output IC Junction-to-Ambient Thermal Resistance | θJAO | | 85 | | °C/W | 1 oz. trace, 2-layer PCB, still air, TA = 25°C | 7 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | in more detail shortly). Second, the leads are typically made from a material such as copper, which has a much | 14 |
## CAD (Adom-generated)
- Symbol: `ACPL-796H-500E`
- Footprint: `Adom_Gen:AVAGO_Broadcom__ACPL-796_ae57c0`
- 3D model: generated to fit the land (STEP)
- 3D model files: `acpl-796h-500e-etched.step` / `acpl-796h-500e-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `acpl-796h-500e.step` / `acpl-796h-500e.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [AVAGO(Broadcom) datasheet](docs/acpl-796h-500e-datasheet.pdf) (16 pp, sha256 `34278b54d33d340e`, retrieved 2026-11-13, tier: manufacturer)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Broadcom's printed LAND PATTERN RECOMMENDATION (p.3): pads 2.16 x 0.64, 11.63 outer span, 1.27 pitch, so pad centres at x +/-(11.63/2 - 2.16/2) = +/-4.735. Replaces KiCad SOIC-16W_7.5x10.3mm (2.05 x 0.6 at +/-4.65). Body 3.505 mm tall (taller than a JEDEC wide SOIC).
[Datasheet PDF](docs/acpl-796h-500e-datasheet.pdf)