main
Download ZIP Propose a change
Generated by adom_assets · KiCad file format 20240108
Name Last commit message Last updated
docs Publish 0.2.0 · Ray
viewers acpl-796h-500e: viewers · Ray
acpl-796h-500e-etched.glb acpl-796h-500e: rebuilt as a full factory component page (was a placeholder) · Ray
acpl-796h-500e-etched.step acpl-796h-500e: rebuilt as a full factory component page (was a placeholder) · Ray
acpl-796h-500e-hero.glb Publish 0.2.0 · Ray
acpl-796h-500e-hero.overlay.json Publish 0.2.0 · Ray
acpl-796h-500e.glb Publish 0.2.0 · Ray
acpl-796h-500e.kicad_mod Publish 0.2.0 · Ray
acpl-796h-500e.kicad_sym Publish 0.1.0 · Ray
acpl-796h-500e.lbr Publish 0.2.0 · Ray
acpl-796h-500e.step Publish 0.2.0 · Ray
package.json Publish 0.2.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.2.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 16 pins · Ray

ACPL-796H-500E

AVAGO(Broadcom) · Optocouplers - Logic Output · SOP-16-300mil

ACPL-796H-500E from AVAGO(Broadcom), in a SOP-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.

Pinout

Pin Name Type Function
1 VDD1 power_in Supply voltage for signal input side (analog side), relative to GND1.
2 VIN+ input Positive analog input, recommended input range ±200 mV.
3 VIN- input Negative analog input, recommended input range ±200 mV (normally connected to GND1). Broadcom prints 'VIN-'.
4 GND1 power_in Supply ground for signal input side.
5 NC no_connect No connection. Leave floating.
6 NC no_connect No connection. Leave floating.
7 VDD1 power_in Supply voltage for signal input side (analog side), relative to GND1.
8 GND1 power_in Supply ground for signal input side.
9 GND2 power_in Supply ground for data output side (digital side).
10 NC no_connect No connection. Leave floating.
11 MDAT output Modulator data output.
12 NC no_connect No connection. Leave floating.
13 MCLKIN input Modulator clock input, 5 MHz to 20 MHz.
14 VDD2 power_in Supply voltage for data output side, relative to GND2.
15 NC no_connect No connection. Leave floating.
16 GND2 power_in Supply ground for data output side (digital side).

Key specifications

Parameter Value
Manufacturer AVAGO(Broadcom)
Package SOP-16-300mil
Category Optocoupler/LED/Digital Tube/Photoelectric Device
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient Operating Temperature TA -40 105 °C 5
VDD1 Supply Voltage VDD1 4.5 5.5 V 5
VDD2 Supply Voltage VDD2 3 5.5 V 5
Analog Input Voltage VIN+, VIN- -200 200 mV Note 1: full scale signal input range ±320 mV 5
Storage Temperature TS -55 125 °C 5
Ambient Operating Temperature TA -40 105 °C 5
Supply voltage VDD1, VDD2 -0.5 6 V 5
Integral Nonlinearity INL -15 3 15 LSB TA = -40°C to +85°C; see Definitions section 6
Integral Nonlinearity INL -25 3 25 LSB TA = 85°C to 105°C 6
Integral Nonlinearity INL -25 25 LSB VIN+ = -250 mV to +250mV 6
Differential Nonlinearity DNL -0.9 0.9 LSB No missing codes, guaranteed by design; see Definitions section 6
Offset Error VOS -1 3 4.5 mV TA = -40°C to +105°C; see Definitions section 6
Offset Drift vs. Temperature TCVOS 3.5 V/°C 6
Gain Error GE -2 2 % TA = -40°C to +105°C, VIN+ = -250 to +250 mV; see Definitions section 6
Gain Error GE -1 1 % TA = 25°C, VIN+ = -250 to +250 mV 6
Full-Scale Differential Voltage Input Range FSR -320 320 mV VIN = VIN+, VIN-; Note 2 6
Signal-to-Noise Ratio SNR 74 80 dB TA = -40°C to +105°C; see Definitions section 6
Signal-to-(Noise + Distortion) Ratio SNDR 65 75 dB TA = -40°C to +105°C; see Definitions section 6
Signal-to-(Noise + Distortion) Ratio SNDR 68 75 dB TA = -40°C to +85°C 6
Signal-to-(Noise + Distortion) Ratio SNDR 65 dB TA = -40°C to +105°C, VIN+ = -250 mV to +250 mV 6
Input Current (digital inputs) IIND -0.5 0.5 A 6
VDD1 Supply Current IDD1 14 19 mA 6
VDD2 Supply Current IDD2 6 8 mA VDD2 = 5 V supply 6
VDD2 Supply Current IDD2 5 7 mA VDD2 = 3.3 V supply 6
Modulator Clock Input Frequency fMCLKIN 5 10 20 MHz Clock duty cycle 40% to 60% 7
Data Delay After Rising Edge of MCLKIN tD 3 15 ns CL = 15 pF 7
Offset Drift vs. VDD1 120 V/V 6
Gain Error Drift vs. Temperature TCGE 60 ppm/°C 6
Gain Error Drift vs. VDD1 110 V/V 6
Average Input Bias Current IINA -0.5 A VDD1 = 5V, VDD2 = 5V, VIN+ = 0 V; Note 3 6
Average Input Resistance RIN 33 k Across VIN+ or VIN- to GND1; Note 3 6
Input Capacitance CINA 8 pF Across VIN+ or VIN- to GND1 6
Effective Number of Bits ENOB 12 Bits see Definitions section 6
Isolation Transient Immunity CMR 25 kV/V VCM = 1 kV; See Definitions section 6
Common-Mode Rejection Ratio CMRR 74 dB 6
Input Capacitance (digital) CIND 6 pF 6
Output Low Voltage VOL 0.4 V IOUT = +200 A 6
Input-Output Momentary Withstand Voltage VISO 5000 Vrms RH ≤ 50%, t = 1 min; TA = 25°C 7
Input-Output Capacitance CI-O 1.4 pF f = 1 MHz 7
Input IC Junction-to-Ambient Thermal Resistance θJAI 83 °C/W 1 oz. trace, 2-layer PCB, still air, TA = 25°C 7
Output IC Junction-to-Ambient Thermal Resistance θJAO 85 °C/W 1 oz. trace, 2-layer PCB, still air, TA = 25°C 7

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper in more detail shortly). Second, the leads are typically made from a material such as copper, which has a much 14

CAD (Adom-generated)

  • Symbol: ACPL-796H-500E
  • Footprint: Adom_Gen:AVAGO_Broadcom__ACPL-796_ae57c0
  • 3D model: generated to fit the land (STEP)
  • 3D model files: acpl-796h-500e-etched.step / acpl-796h-500e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); acpl-796h-500e.step / acpl-796h-500e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: AVAGO(Broadcom) datasheet (16 pp, sha256 34278b54d33d340e, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Broadcom's printed LAND PATTERN RECOMMENDATION (p.3): pads 2.16 x 0.64, 11.63 outer span, 1.27 pitch, so pad centres at x +/-(11.63/2 - 2.16/2) = +/-4.735. Replaces KiCad SOIC-16W_7.5x10.3mm (2.05 x 0.6 at +/-4.65). Body 3.505 mm tall (taller than a JEDEC wide SOIC).

Datasheet PDF