main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.2 · Ray
viewers a6211gljtr-t: footprint pads join the pin-hover bus with the symbol (9 pads) · Ray
a6211gljtr-t-etched.fit.json a6211gljtr-t: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
a6211gljtr-t-etched.glb a6211gljtr-t: one-pass backfill (re-etched, pushed with pre-existing FAIL: pads,symbol) · Ray
a6211gljtr-t-etched.step a6211gljtr-t: factory component page (tier=lcsc) · Ray
a6211gljtr-t-hero.glb a6211gljtr-t: hero GLB from the etched model (keeps the MPN mark) · Ray
a6211gljtr-t-hero.overlay.json a6211gljtr-t: hero GLB from the etched model (keeps the MPN mark) · Ray
a6211gljtr-t.glb Publish 0.1.0 · Ray
a6211gljtr-t.kicad_mod Publish 0.1.0 · Ray
a6211gljtr-t.kicad_sym Publish 0.1.2 · Ray
a6211gljtr-t.lbr Publish 0.1.2 · Ray
a6211gljtr-t.step Publish 0.1.0 · Ray
package.json Publish 0.1.3 · Ray
page.json Publish 0.1.3 · Ray
README.md Publish 0.1.2 · Ray

A6211GLJTR-T

Allegro MicroSystems LLC · LED Drivers · SOIC-8-EP

A6211GLJTR-T from Allegro MicroSystems LLC, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Supply voltage input, specified from 6 to 48 V with an absolute maximum of -0.3 to 50 V, and it also sets the on-time through the RON resistor to the TON pin.
2 TON passive Regulator on-time setting resistor terminal, where RON is connected between VIN and TON to program the switching frequency (fSW = 1 / [k × (RON + RINT)] with k = 0.0139 and RINT = 5 kΩ internal).
3 EN input Logic input for enable and PWM dimming, with VIH minimum 1.8 V and VIL maximum 0.4 V, a high-voltage tolerant input that needs a 1 kΩ series resistor if it is driven above VIN.
4 CS input Drive output current sense feedback, where the average CS voltage is regulated at VCSREG = 200 mV typical (187.5 to 210 mV) across the LED current sense resistor, with an absolute maximum of -0.3 to 7 V.
5 VCC power_out Internal linear regulator output regulated at 5.1 to 5.7 V for 0 mA < ICC < 5 mA, with an absolute maximum of -0.3 to 7 V to GND, and it is not designed to drive an external load.
6 GND power_in Ground terminal for the device, which is also the reference for the exposed pad connection.
7 BOOT passive DMOS gate driver bootstrap terminal, where the bootstrap capacitor C4 is placed near this pin, with VBOOT rated from -0.3 to VIN + 8 V.
8 SW output Switched output terminal driving the inductor, with switching voltage rated from -1.5 to VIN + 0.3 V and buck switch current limit of 3.0 to 5.0 A.
9 PAD passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Allegro MicroSystems LLC
Package SOIC-8-EP
Category LED Drivers
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Supply Voltage VIN 6 48 V TA = 25°C 4
Buck Switch Current Limit Threshold ISWLIM 3 4 5 A 4
Buck Switch On-Resistance RDS(on) 0.25 0.4 Ω VBOOT = VIN + 4.3 V, TA = 25°C, ISW = 1 A 4
VIN Pin Shutdown Current IINSD 1 10 µA EN shorted to GND 4
BOOT Undervoltage Lockout Threshold VBOOTUV 1.7 2.9 4.3 V VBOOT to VSW increasing 4
Switching Minimum Off-Time tOFFmin 110 150 ns VCS = 0 V 4
Switching Minimum On-Time tONmin 110 150 ns 4
Selected On-Time tON 800 1000 1200 ns VIN = 24 V, VOUT = 12 V, RON = 137 kΩ 4
Load Current Sense Regulation Threshold VCSREG 187.5 200 210 mV VCS decreasing, SW turns on 4
VCC Regulated Output VCC 5.1 5.4 5.7 V 0 mA < ICC < 5 mA, VIN > 6 V 4
VCC Current Limit ICCLIM 5 20 mA VIN = 24 V, VCC = 0 V 4
Logic High Voltage VIH 1.8 V VEN increasing 4
Logic Low Voltage VIL 0.4 V VEN decreasing 4
Maximum PWM Dimming Off-Time tPWML 10 17 ms Measured while EN = low, during dimming control, and internal references are powered-on 4
Supply Voltage VIN -0.3 50 V 2
Bootstrap Drive Voltage VBOOT -0.3 V Printed as VIN +8 V; upper limit is not a fixed number 2
Switching Voltage VSW -1.5 V Printed as VIN +0.3 V; upper limit is not a fixed number 2
Linear Regulator Terminal VCC -0.3 7 V VCC to GND 2
Enable and TON Voltage VEN, VTON -0.3 V Printed as VIN +0.3 V; upper limit is not a fixed number 2
Current Sense Voltage VCS -0.3 7 V 2
Operating Ambient Temperature TA -40 105 °C G temperature range 2
Maximum Junction Temperature TJ(max) 150 °C 2
Storage Temperature Tstg -55 150 °C 2
Package Thermal Resistance (Junction to Ambient), 4-layer PCB RθJA 35 °C/W On 4-layer PCB based on JEDEC standard 2
Package Thermal Resistance (Junction to Ambient), 2-layer PCB RθJA 62 °C/W On 2-layer generic test PCB with 0.8 in.2 of copper area each side 2
Package Thermal Resistance (Junction to Pad) RθJP 2 °C/W 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin It is lead (Pb) free, with 100% matte-tin leadframe plating. A6211-DS, Rev. 5 1

CAD (KiCad official)

  • Symbol: A6211GLJTR-T
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: SOIC-8-EP (KiCad packages3D, STEP)
  • 3D model files: a6211gljtr-t-etched.step / a6211gljtr-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); a6211gljtr-t.step / a6211gljtr-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Allegro MicroSystems LLC datasheet (18 pp, sha256 48373dd80f837b74, retrieved 2026-11-13, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF