← Commit history
README.md+52−15
@@ -2,21 +2,21 @@  **Allegro MicroSystems LLC** · LED Drivers · SOIC-8-EP -A6211GLJTR-T from Allegro MicroSystems LLC, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.+A6211GLJTR-T from Allegro MicroSystems LLC, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | VIN | power_in | Supply voltage input terminal. Operating range 6 to 48 V (absolute max −0.3 to 50 V). Bypass locally to GND. |-| 2 | TON | input | Regulator on-time setting resistor terminal. External resistor RON to VIN sets the buck switch on-time (and effective switching frequency). |-| 3 | EN | input | Logic input for Enable and PWM dimming. VIL = 0.4 V, VIH = 1.8 V (abs max −0.3 to VIN+0.3 V). Drive with 100 Hz to 2 kHz PWM for LED brightness control; low = low-power shutdown (~1 µA). |-| 4 | CS | input | Drive output current sense feedback. Connects to RSENSE between the LED cathode and GND; internal 0.2 V reference sets the average LED current (ILED = 0.2 V / RSENSE). Absolute max −0.3 to 7 V. |-| 5 | VCC | power_out | Internal linear regulator output (~5.3 V typ). Decouple with CVCC to GND. Absolute max VCC-to-GND −0.3 to 7 V; intended for internal use, not for external loading. |-| 6 | GND | power_in | Device ground terminal. Tie to the exposed thermal PAD and to the power ground plane. |-| 7 | BOOT | passive | DMOS gate-driver bootstrap terminal. External CBOOT capacitor between BOOT and SW provides the high-side gate drive supply. Absolute max −0.3 to VIN+8 V; UVLO ~2.9 V (BOOT-to-SW). |-| 8 | SW | output | Switched output terminal (source of the integrated high-side N-channel DMOS). Connects to the buck inductor L1 and to the freewheeling diode D1 cathode. Absolute max −1.5 to VIN+0.3 V; RDS(on) ≈ 0.25 Ω, 3 A max output. |-| PAD | PAD | power_in | Exposed pad on the underside of the package for enhanced thermal dissipation. Must be connected to GND (pin 6) and to a copper thermal pour. RθJP ≈ 2 °C/W. |+| 1 | VIN | power_in | Supply voltage input, specified from 6 to 48 V with an absolute maximum of -0.3 to 50 V, and it also sets the on-time through the RON resistor to the TON pin. |+| 2 | TON | passive | Regulator on-time setting resistor terminal, where RON is connected between VIN and TON to program the switching frequency (fSW = 1 / [k × (RON + RINT)] with k = 0.0139 and RINT = 5 kΩ internal). |+| 3 | EN | input | Logic input for enable and PWM dimming, with VIH minimum 1.8 V and VIL maximum 0.4 V, a high-voltage tolerant input that needs a 1 kΩ series resistor if it is driven above VIN. |+| 4 | CS | input | Drive output current sense feedback, where the average CS voltage is regulated at VCSREG = 200 mV typical (187.5 to 210 mV) across the LED current sense resistor, with an absolute maximum of -0.3 to 7 V. |+| 5 | VCC | power_out | Internal linear regulator output regulated at 5.1 to 5.7 V for 0 mA < ICC < 5 mA, with an absolute maximum of -0.3 to 7 V to GND, and it is not designed to drive an external load. |+| 6 | GND | power_in | Ground terminal for the device, which is also the reference for the exposed pad connection. |+| 7 | BOOT | passive | DMOS gate driver bootstrap terminal, where the bootstrap capacitor C4 is placed near this pin, with VBOOT rated from -0.3 to VIN + 8 V. |+| 8 | SW | output | Switched output terminal driving the inductor, with switching voltage rated from -1.5 to VIN + 0.3 V and buck switch current limit of 3.0 to 5.0 A. |+| 9 | PAD | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |  ## Key specifications @@ -24,12 +24,49 @@ A6211GLJTR-T from Allegro MicroSystems LLC, in a SOIC-8-EP. Pinout and pin descr |---|---| | Manufacturer | Allegro MicroSystems LLC | | Package | SOIC-8-EP |-| Category | LED-drv |+| Category | LED Drivers | | Pins | 9 | -## Ordering variants+## Electrical characteristics -- `A6211GLJTR-T`+Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Input Supply Voltage | VIN | 6 |  | 48 | V | TA = 25°C | 4 |+| Buck Switch Current Limit Threshold | ISWLIM | 3 | 4 | 5 | A |  | 4 |+| Buck Switch On-Resistance | RDS(on) |  | 0.25 | 0.4 | Ω | VBOOT = VIN + 4.3 V, TA = 25°C, ISW = 1 A | 4 |+| VIN Pin Shutdown Current | IINSD |  | 1 | 10 | µA | EN shorted to GND | 4 |+| BOOT Undervoltage Lockout Threshold | VBOOTUV | 1.7 | 2.9 | 4.3 | V | VBOOT to VSW increasing | 4 |+| Switching Minimum Off-Time | tOFFmin |  | 110 | 150 | ns | VCS = 0 V | 4 |+| Switching Minimum On-Time | tONmin |  | 110 | 150 | ns |  | 4 |+| Selected On-Time | tON | 800 | 1000 | 1200 | ns | VIN = 24 V, VOUT = 12 V, RON = 137 kΩ | 4 |+| Load Current Sense Regulation Threshold | VCSREG | 187.5 | 200 | 210 | mV | VCS decreasing, SW turns on | 4 |+| VCC Regulated Output | VCC | 5.1 | 5.4 | 5.7 | V | 0 mA < ICC < 5 mA, VIN > 6 V | 4 |+| VCC Current Limit | ICCLIM | 5 | 20 |  | mA | VIN = 24 V, VCC = 0 V | 4 |+| Logic High Voltage | VIH | 1.8 |  |  | V | VEN increasing | 4 |+| Logic Low Voltage | VIL |  |  | 0.4 | V | VEN decreasing | 4 |+| Maximum PWM Dimming Off-Time | tPWML | 10 | 17 |  | ms | Measured while EN = low, during dimming control, and internal references are powered-on | 4 |+| Supply Voltage | VIN | -0.3 |  | 50 | V |  | 2 |+| Bootstrap Drive Voltage | VBOOT | -0.3 |  |  | V | Printed as VIN +8 V; upper limit is not a fixed number | 2 |+| Switching Voltage | VSW | -1.5 |  |  | V | Printed as VIN +0.3 V; upper limit is not a fixed number | 2 |+| Linear Regulator Terminal | VCC | -0.3 |  | 7 | V | VCC to GND | 2 |+| Enable and TON Voltage | VEN, VTON | -0.3 |  |  | V | Printed as VIN +0.3 V; upper limit is not a fixed number | 2 |+| Current Sense Voltage | VCS | -0.3 |  | 7 | V |  | 2 |+| Operating Ambient Temperature | TA | -40 |  | 105 | °C | G temperature range | 2 |+| Maximum Junction Temperature | TJ(max) |  |  | 150 | °C |  | 2 |+| Storage Temperature | Tstg | -55 |  | 150 | °C |  | 2 |+| Package Thermal Resistance (Junction to Ambient), 4-layer PCB | RθJA |  | 35 |  | °C/W | On 4-layer PCB based on JEDEC standard | 2 |+| Package Thermal Resistance (Junction to Ambient), 2-layer PCB | RθJA |  | 62 |  | °C/W | On 2-layer generic test PCB with 0.8 in.2 of copper area each side | 2 |+| Package Thermal Resistance (Junction to Pad) | RθJP |  | 2 |  | °C/W |  | 2 |++## Materials and finish++As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).++| Part | Material | Colour / plating | Datasheet says | Page |+|---|---|---|---|---|+| contacts |  | tin | It is lead (Pb) free, with 100% matte-tin leadframe plating. A6211-DS, Rev. 5 | 1 |  ## CAD (KiCad official) @@ -42,8 +79,8 @@ A6211GLJTR-T from Allegro MicroSystems LLC, in a SOIC-8-EP. Pinout and pin descr  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Allegro MicroSystems LLC datasheet](docs/a6211gljtr-t-datasheet.pdf) (None pp, sha256 `48373dd80f837b74`, retrieved 2026-08-17, tier: lcsc)-- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **Datasheet:** [Allegro MicroSystems LLC datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586199868038004736) (18 pp, sha256 `48373dd80f837b74`, retrieved 2026-11-13, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).  [Datasheet PDF](docs/a6211gljtr-t-datasheet.pdf)
a6211gljtr-t-hero.glb
⋯ 1 unchanged line ⋯
a6211gljtr-t-hero.overlay.json+2−2
@@ -74,9 +74,9 @@     "footprint": "a6211gljtr-t.kicad_mod",     "footprint_sha256": "a7971720bdda0353306df93e5fd71765420f318659baa75f0dc1e7a40c1d2eca",     "pins": "page.json component.pins",-    "pins_sha256": "c5304b0eb06d77f3ced1d4cfbe9cea225e242b0bb3ef5286a8cb0f8e51fc34fb"+    "pins_sha256": "43e5f1c98921d7ddf67eafc1ffdb43c3c3b7d22d539cca9e06d68a5b865c34b3"   },-  "generator": "adom-wiki 1.8.23 (component_hero)",+  "generator": "adom-wiki 1.8.24 (component_hero)",   "labels": [     {       "pad": "1",
a6211gljtr-t.kicad_sym+17−13
@@ -1,45 +1,49 @@ (kicad_symbol_lib (version 20211014) (generator ds2sf_rect)   (symbol "A6211GLJTR-T" (in_bom yes) (on_board yes)-    (property "Reference" "U" (at 0 7.62 0) (effects (font (size 1.27 1.27))))+    (property "Reference" "U" (at 0 10.16 0) (effects (font (size 1.27 1.27))))     (property "Value" "A6211GLJTR-T" (at 0 -10.16 0) (effects (font (size 1.27 1.27))))     (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))     (symbol "A6211GLJTR-T_0_1"-    (rectangle (start -12.70 5.08) (end 12.70 -7.62)+    (rectangle (start -12.70 7.62) (end 12.70 -7.62)       (stroke (width 0.254) (type default)) (fill (type background)))     )     (symbol "A6211GLJTR-T_1_1"-    (pin power_in line (at -17.78 2.54 0) (length 5.08)+    (pin power_in line (at -17.78 5.08 0) (length 5.08)       (name "VIN" (effects (font (size 1.27 1.27))))       (number "1" (effects (font (size 1.27 1.27))))     )-    (pin input line (at -17.78 0.00 0) (length 5.08)+    (pin passive line (at -17.78 2.54 0) (length 5.08)       (name "TON" (effects (font (size 1.27 1.27))))       (number "2" (effects (font (size 1.27 1.27))))     )-    (pin input line (at -17.78 -2.54 0) (length 5.08)+    (pin input line (at -17.78 0.00 0) (length 5.08)       (name "EN" (effects (font (size 1.27 1.27))))       (number "3" (effects (font (size 1.27 1.27))))     )-    (pin input line (at -17.78 -5.08 0) (length 5.08)+    (pin input line (at -17.78 -2.54 0) (length 5.08)       (name "CS" (effects (font (size 1.27 1.27))))       (number "4" (effects (font (size 1.27 1.27))))     )-    (pin output line (at 17.78 2.54 180) (length 5.08)+    (pin power_out line (at -17.78 -5.08 0) (length 5.08)+      (name "VCC" (effects (font (size 1.27 1.27))))+      (number "5" (effects (font (size 1.27 1.27))))+    )+    (pin passive line (at 17.78 2.54 180) (length 5.08)+      (name "PAD" (effects (font (size 1.27 1.27))))+      (number "9" (effects (font (size 1.27 1.27))))+    )+    (pin output line (at 17.78 0.00 180) (length 5.08)       (name "SW" (effects (font (size 1.27 1.27))))       (number "8" (effects (font (size 1.27 1.27))))     )-    (pin passive line (at 17.78 0.00 180) (length 5.08)+    (pin passive line (at 17.78 -2.54 180) (length 5.08)       (name "BOOT" (effects (font (size 1.27 1.27))))       (number "7" (effects (font (size 1.27 1.27))))     )-    (pin power_in line (at 17.78 -2.54 180) (length 5.08)+    (pin power_in line (at 17.78 -5.08 180) (length 5.08)       (name "GND" (effects (font (size 1.27 1.27))))       (number "6" (effects (font (size 1.27 1.27))))     )-    (pin power_out line (at 17.78 -5.08 180) (length 5.08)-      (name "VCC" (effects (font (size 1.27 1.27))))-      (number "5" (effects (font (size 1.27 1.27))))-    )     )   ) )
a6211gljtr-t.lbr+16−14
@@ -62,7 +62,7 @@   <smd name="6" x="2.4750" y="-0.6350" dx="1.9500" dy="0.6000" layer="1" roundness="50"/>   <smd name="7" x="2.4750" y="0.6350" dx="1.9500" dy="0.6000" layer="1" roundness="50"/>   <smd name="8" x="2.4750" y="1.9050" dx="1.9500" dy="0.6000" layer="1" roundness="50"/>-  <smd name="9" x="0.0000" y="-0.0000" dx="2.2900" dy="3.0000" layer="1"/>+  <smd name="9" x="0.0000" y="-0.0000" dx="2.2900" dy="3.0000" layer="1" cream="no"/>   <polygon width="0.1200" layer="21">     <vertex x="-2.6000" y="2.4700"/>     <vertex x="-2.8400" y="2.8000"/>@@ -87,20 +87,21 @@ </packages> <symbols> <symbol name="A6211GLJTR-T">-  <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/>-  <wire x1="12.7" y1="5.08" x2="12.7" y2="-7.62" width="0.254" layer="94"/>+  <wire x1="-12.7" y1="7.62" x2="12.7" y2="7.62" width="0.254" layer="94"/>+  <wire x1="12.7" y1="7.62" x2="12.7" y2="-7.62" width="0.254" layer="94"/>   <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>-  <wire x1="-12.7" y1="-7.62" x2="-12.7" y2="5.08" width="0.254" layer="94"/>-  <text x="0.0000" y="7.6200" size="1.27" layer="95" align="center">&gt;NAME</text>+  <wire x1="-12.7" y1="-7.62" x2="-12.7" y2="7.62" width="0.254" layer="94"/>+  <text x="0.0000" y="10.1600" size="1.27" layer="95" align="center">&gt;NAME</text>   <text x="0.0000" y="-10.1600" size="1.27" layer="96" align="center">&gt;VALUE</text>-  <pin name="VIN" x="-17.78" y="2.54" length="middle" direction="pwr"/>-  <pin name="TON" x="-17.78" y="0" length="middle" direction="in"/>-  <pin name="EN" x="-17.78" y="-2.54" length="middle" direction="in"/>-  <pin name="CS" x="-17.78" y="-5.08" length="middle" direction="in"/>-  <pin name="SW" x="17.78" y="2.54" length="middle" direction="out" rot="R180"/>-  <pin name="BOOT" x="17.78" y="0" length="middle" direction="pas" rot="R180"/>-  <pin name="GND" x="17.78" y="-2.54" length="middle" direction="pwr" rot="R180"/>-  <pin name="VCC" x="17.78" y="-5.08" length="middle" direction="out" rot="R180"/>+  <pin name="VIN" x="-17.78" y="5.08" length="middle" direction="pwr"/>+  <pin name="TON" x="-17.78" y="2.54" length="middle" direction="pas"/>+  <pin name="EN" x="-17.78" y="0" length="middle" direction="in"/>+  <pin name="CS" x="-17.78" y="-2.54" length="middle" direction="in"/>+  <pin name="VCC" x="-17.78" y="-5.08" length="middle" direction="out"/>+  <pin name="PAD" x="17.78" y="2.54" length="middle" direction="pas" rot="R180"/>+  <pin name="SW" x="17.78" y="0" length="middle" direction="out" rot="R180"/>+  <pin name="BOOT" x="17.78" y="-2.54" length="middle" direction="pas" rot="R180"/>+  <pin name="GND" x="17.78" y="-5.08" length="middle" direction="pwr" rot="R180"/> </symbol> </symbols> <devicesets>@@ -116,10 +117,11 @@         <connect gate="G$1" pin="TON" pad="2"/>         <connect gate="G$1" pin="EN" pad="3"/>         <connect gate="G$1" pin="CS" pad="4"/>+        <connect gate="G$1" pin="VCC" pad="5"/>+        <connect gate="G$1" pin="PAD" pad="9"/>         <connect gate="G$1" pin="SW" pad="8"/>         <connect gate="G$1" pin="BOOT" pad="7"/>         <connect gate="G$1" pin="GND" pad="6"/>-        <connect gate="G$1" pin="VCC" pad="5"/>       </connects>       <technologies><technology name=""/></technologies>     </device>
docs/hero.png
⋯ 1 unchanged line ⋯
package.json+124−29
@@ -1,12 +1,14 @@ {   "slug": "a6211gljtr-t",-  "version": "0.1.1",+  "version": "0.1.2",   "type": "component",-  "description": "Allegro MicroSystems LLC LED Drivers, SOIC-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "description": "Allegro MicroSystems LLC LED Drivers, SOIC-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [     "component",-    "led-drv",-    "a6211gljtr-t"+    "led drivers",+    "a6211gljtr-t",+    "factory-2.0.0",+    "extractor-text"   ],   "dependencies": {},   "hero": {@@ -25,8 +27,6 @@     "docs/a6211gljtr-t-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html",-    "a6211gljtr-t-etched.step",-    "a6211gljtr-t-etched.glb",     "a6211gljtr-t-hero.glb",     "a6211gljtr-t-hero.overlay.json"   ],@@ -36,6 +36,8 @@     "package": "SOIC-8-EP",     "pin_count": 9,     "category": "LED Drivers",+    "subcategory": "LED Drivers",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586199868038004736",     "parts": {       "symbol": "a6211gljtr-t.kicad_sym",       "footprint": "a6211gljtr-t.kicad_mod",@@ -45,65 +47,111 @@       "model_3d_step_plain": "a6211gljtr-t.step",       "lbr": "a6211gljtr-t.lbr"     },+    "distributor_links": {+      "lcsc": "C150827",+      "digikey": "620-1477-2-ND",+      "mouser": "250-A6211GLJTR-T"+    },+    "distributor_check": {+      "checked_at": "2026-11-13T07:24:17Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "620-1477-2-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "250-A6211GLJTR-T",+        "status": "found"+      }+    },     "pins": [       {         "number": "1",         "name": "VIN",         "type": "power_in",-        "description": "Supply voltage input terminal. Operating range 6 to 48 V (absolute max −0.3 to 50 V). Bypass locally to GND."+        "description": "Supply voltage input, specified from 6 to 48 V with an absolute maximum of -0.3 to 50 V, and it also sets the on-time through the RON resistor to the TON pin."       },       {         "number": "2",         "name": "TON",-        "type": "input",-        "description": "Regulator on-time setting resistor terminal. External resistor RON to VIN sets the buck switch on-time (and effective switching frequency)."+        "type": "passive",+        "description": "Regulator on-time setting resistor terminal, where RON is connected between VIN and TON to program the switching frequency (fSW = 1 / [k × (RON + RINT)] with k = 0.0139 and RINT = 5 kΩ internal)."       },       {         "number": "3",         "name": "EN",         "type": "input",-        "description": "Logic input for Enable and PWM dimming. VIL = 0.4 V, VIH = 1.8 V (abs max −0.3 to VIN+0.3 V). Drive with 100 Hz to 2 kHz PWM for LED brightness control; low = low-power shutdown (~1 µA)."+        "description": "Logic input for enable and PWM dimming, with VIH minimum 1.8 V and VIL maximum 0.4 V, a high-voltage tolerant input that needs a 1 kΩ series resistor if it is driven above VIN."       },       {         "number": "4",         "name": "CS",         "type": "input",-        "description": "Drive output current sense feedback. Connects to RSENSE between the LED cathode and GND; internal 0.2 V reference sets the average LED current (ILED = 0.2 V / RSENSE). Absolute max −0.3 to 7 V."+        "description": "Drive output current sense feedback, where the average CS voltage is regulated at VCSREG = 200 mV typical (187.5 to 210 mV) across the LED current sense resistor, with an absolute maximum of -0.3 to 7 V."       },       {         "number": "5",         "name": "VCC",         "type": "power_out",-        "description": "Internal linear regulator output (~5.3 V typ). Decouple with CVCC to GND. Absolute max VCC-to-GND −0.3 to 7 V; intended for internal use, not for external loading."+        "description": "Internal linear regulator output regulated at 5.1 to 5.7 V for 0 mA < ICC < 5 mA, with an absolute maximum of -0.3 to 7 V to GND, and it is not designed to drive an external load."       },       {         "number": "6",         "name": "GND",         "type": "power_in",-        "description": "Device ground terminal. Tie to the exposed thermal PAD and to the power ground plane."+        "description": "Ground terminal for the device, which is also the reference for the exposed pad connection."       },       {         "number": "7",         "name": "BOOT",         "type": "passive",-        "description": "DMOS gate-driver bootstrap terminal. External CBOOT capacitor between BOOT and SW provides the high-side gate drive supply. Absolute max −0.3 to VIN+8 V; UVLO ~2.9 V (BOOT-to-SW)."+        "description": "DMOS gate driver bootstrap terminal, where the bootstrap capacitor C4 is placed near this pin, with VBOOT rated from -0.3 to VIN + 8 V."       },       {         "number": "8",         "name": "SW",         "type": "output",-        "description": "Switched output terminal (source of the integrated high-side N-channel DMOS). Connects to the buck inductor L1 and to the freewheeling diode D1 cathode. Absolute max −1.5 to VIN+0.3 V; RDS(on) ≈ 0.25 Ω, 3 A max output."+        "description": "Switched output terminal driving the inductor, with switching voltage rated from -1.5 to VIN + 0.3 V and buck switch current limit of 3.0 to 5.0 A."       },       {-        "number": "PAD",+        "number": "9",         "name": "PAD",-        "type": "power_in",-        "description": "Exposed pad on the underside of the package for enhanced thermal dissipation. Must be connected to GND (pin 6) and to a copper thermal pour. RθJP ≈ 2 °C/W.",-        "thermal_pad": true+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."       }     ],     "provenance": {-      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-5-5",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: The exposed pad is not a numbered pin on the package; it is printed as 'PAD' in the terminal list an; The pinout diagram and the terminal list both appear on page 2 and agree on pins 1 to 8, so no confl",+          "exposed pad 9 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 18,+        "cost_usd": 0.1086,+        "at": "2026-11-13T07:24:01"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586199868038004736",+        "pages": 18,+        "sha256": "48373dd80f837b74",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 9,+        "described": 9,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }     },     "viewers": {       "symbol": "viewers/symbol.html",@@ -118,15 +166,15 @@         "origin": "footprint origin = pad-pattern centre",         "seat": "z = 0",         "extents_mm": [-          6,+          6.0,           4.9,           1.55         ],-        "zmin_mm": 0,-        "centre_offset_mm": 0,+        "zmin_mm": -0.0,+        "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",-        "checked": "2026-10-07",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -144,11 +192,58 @@         "zmin_mm": -0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "74c4a288fcc850f1b54ba32d2fa5b87639259f0ec7144ea590294db53cc6ba71",-        "checked": "2026-11-12",+        "sha256": "05049e37030577fb88832ab0546c4dfe456f1bca7c37e23a2ae0358cf9d8012a",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }-    ]-  },-  "visibility": "public"+    ],+    "package_dims": {+      "package_code": "LJ",+      "source_page": 17,+      "D": {+        "nom_mm": 4.9,+        "range_mm": [+          4.8,+          5.0+        ]+      },+      "E1": {+        "nom_mm": 3.9,+        "range_mm": [+          3.8,+          4.0+        ]+      },+      "E": {+        "nom_mm": 6.0,+        "range_mm": [+          5.8,+          6.2+        ]+      },+      "e": {+        "nom_mm": 1.27,+        "range_mm": [+          null,+          null+        ]+      },+      "A": {+        "nom_mm": 1.7,+        "range_mm": [+          null,+          1.7+        ]+      },+      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",+      "model_check": {+        "file": "a6211gljtr-t.step",+        "verdict": "PASS",+        "reasons": [+          "height and body within the datasheet's package drawing"+        ],+        "by": "factory/package_fit.py"+      }+    }+  } }
page.json+120−24
@@ -1,12 +1,14 @@ {   "slug": "a6211gljtr-t",-  "version": "0.1.1",+  "version": "0.1.2",   "type": "component",-  "description": "Allegro MicroSystems LLC LED Drivers, SOIC-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "description": "Allegro MicroSystems LLC LED Drivers, SOIC-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [     "component",-    "led-drv",-    "a6211gljtr-t"+    "led drivers",+    "a6211gljtr-t",+    "factory-2.0.0",+    "extractor-text"   ],   "dependencies": {},   "hero": {@@ -25,8 +27,6 @@     "docs/a6211gljtr-t-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html",-    "a6211gljtr-t-etched.step",-    "a6211gljtr-t-etched.glb",     "a6211gljtr-t-hero.glb",     "a6211gljtr-t-hero.overlay.json"   ],@@ -40,6 +40,8 @@     "package": "SOIC-8-EP",     "pin_count": 9,     "category": "LED Drivers",+    "subcategory": "LED Drivers",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586199868038004736",     "parts": {       "symbol": "a6211gljtr-t.kicad_sym",       "footprint": "a6211gljtr-t.kicad_mod",@@ -49,65 +51,111 @@       "model_3d_step_plain": "a6211gljtr-t.step",       "lbr": "a6211gljtr-t.lbr"     },+    "distributor_links": {+      "lcsc": "C150827",+      "digikey": "620-1477-2-ND",+      "mouser": "250-A6211GLJTR-T"+    },+    "distributor_check": {+      "checked_at": "2026-11-13T07:24:17Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "620-1477-2-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "250-A6211GLJTR-T",+        "status": "found"+      }+    },     "pins": [       {         "number": "1",         "name": "VIN",         "type": "power_in",-        "description": "Supply voltage input terminal. Operating range 6 to 48 V (absolute max −0.3 to 50 V). Bypass locally to GND."+        "description": "Supply voltage input, specified from 6 to 48 V with an absolute maximum of -0.3 to 50 V, and it also sets the on-time through the RON resistor to the TON pin."       },       {         "number": "2",         "name": "TON",-        "type": "input",-        "description": "Regulator on-time setting resistor terminal. External resistor RON to VIN sets the buck switch on-time (and effective switching frequency)."+        "type": "passive",+        "description": "Regulator on-time setting resistor terminal, where RON is connected between VIN and TON to program the switching frequency (fSW = 1 / [k × (RON + RINT)] with k = 0.0139 and RINT = 5 kΩ internal)."       },       {         "number": "3",         "name": "EN",         "type": "input",-        "description": "Logic input for Enable and PWM dimming. VIL = 0.4 V, VIH = 1.8 V (abs max −0.3 to VIN+0.3 V). Drive with 100 Hz to 2 kHz PWM for LED brightness control; low = low-power shutdown (~1 µA)."+        "description": "Logic input for enable and PWM dimming, with VIH minimum 1.8 V and VIL maximum 0.4 V, a high-voltage tolerant input that needs a 1 kΩ series resistor if it is driven above VIN."       },       {         "number": "4",         "name": "CS",         "type": "input",-        "description": "Drive output current sense feedback. Connects to RSENSE between the LED cathode and GND; internal 0.2 V reference sets the average LED current (ILED = 0.2 V / RSENSE). Absolute max −0.3 to 7 V."+        "description": "Drive output current sense feedback, where the average CS voltage is regulated at VCSREG = 200 mV typical (187.5 to 210 mV) across the LED current sense resistor, with an absolute maximum of -0.3 to 7 V."       },       {         "number": "5",         "name": "VCC",         "type": "power_out",-        "description": "Internal linear regulator output (~5.3 V typ). Decouple with CVCC to GND. Absolute max VCC-to-GND −0.3 to 7 V; intended for internal use, not for external loading."+        "description": "Internal linear regulator output regulated at 5.1 to 5.7 V for 0 mA < ICC < 5 mA, with an absolute maximum of -0.3 to 7 V to GND, and it is not designed to drive an external load."       },       {         "number": "6",         "name": "GND",         "type": "power_in",-        "description": "Device ground terminal. Tie to the exposed thermal PAD and to the power ground plane."+        "description": "Ground terminal for the device, which is also the reference for the exposed pad connection."       },       {         "number": "7",         "name": "BOOT",         "type": "passive",-        "description": "DMOS gate-driver bootstrap terminal. External CBOOT capacitor between BOOT and SW provides the high-side gate drive supply. Absolute max −0.3 to VIN+8 V; UVLO ~2.9 V (BOOT-to-SW)."+        "description": "DMOS gate driver bootstrap terminal, where the bootstrap capacitor C4 is placed near this pin, with VBOOT rated from -0.3 to VIN + 8 V."       },       {         "number": "8",         "name": "SW",         "type": "output",-        "description": "Switched output terminal (source of the integrated high-side N-channel DMOS). Connects to the buck inductor L1 and to the freewheeling diode D1 cathode. Absolute max −1.5 to VIN+0.3 V; RDS(on) ≈ 0.25 Ω, 3 A max output."+        "description": "Switched output terminal driving the inductor, with switching voltage rated from -1.5 to VIN + 0.3 V and buck switch current limit of 3.0 to 5.0 A."       },       {-        "number": "PAD",+        "number": "9",         "name": "PAD",-        "type": "power_in",-        "description": "Exposed pad on the underside of the package for enhanced thermal dissipation. Must be connected to GND (pin 6) and to a copper thermal pour. RθJP ≈ 2 °C/W.",-        "thermal_pad": true+        "type": "passive",+        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."       }     ],     "provenance": {-      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-5-5",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: The exposed pad is not a numbered pin on the package; it is printed as 'PAD' in the terminal list an; The pinout diagram and the terminal list both appear on page 2 and agree on pins 1 to 8, so no confl",+          "exposed pad 9 added from the footprint",+          "dropped thermal pad ['EP'] absent from footprint"+        ],+        "pages_sent": 18,+        "cost_usd": 0.1086,+        "at": "2026-11-13T07:24:01"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8586199868038004736",+        "pages": 18,+        "sha256": "48373dd80f837b74",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 9,+        "described": 9,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }     },     "viewers": {       "symbol": "viewers/symbol.html",@@ -130,7 +178,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",-        "checked": "2026-10-07",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -148,11 +196,59 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "74c4a288fcc850f1b54ba32d2fa5b87639259f0ec7144ea590294db53cc6ba71",-        "checked": "2026-11-12",+        "sha256": "05049e37030577fb88832ab0546c4dfe456f1bca7c37e23a2ae0358cf9d8012a",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }-    ]+    ],+    "package_dims": {+      "package_code": "LJ",+      "source_page": 17,+      "D": {+        "nom_mm": 4.9,+        "range_mm": [+          4.8,+          5+        ]+      },+      "E1": {+        "nom_mm": 3.9,+        "range_mm": [+          3.8,+          4+        ]+      },+      "E": {+        "nom_mm": 6,+        "range_mm": [+          5.8,+          6.2+        ]+      },+      "e": {+        "nom_mm": 1.27,+        "range_mm": [+          null,+          null+        ]+      },+      "A": {+        "nom_mm": 1.7,+        "range_mm": [+          null,+          1.7+        ]+      },+      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",+      "model_check": {+        "file": "a6211gljtr-t.step",+        "verdict": "PASS",+        "reasons": [+          "height and body within the datasheet's package drawing"+        ],+        "by": "factory/package_fit.py"+      }+    }   },   "org": "adom" }\ No newline at end of file
viewers/footprint.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/A6211GLJTR-T footprint</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>PCB footprint</span><span class=sp></span><button class="lyrtog on" data-lyr="copper"><span class="d" style="background:#e35d5d"></span>Copper</button><button class="lyrtog on" data-lyr="silk"><span class="d" style="background:#e6edf3"></span>Silkscreen</button><button class="lyrtog" data-lyr="fab"><span class="d" style="background:#8b949e"></span>Fab</button><button class="lyrtog" data-lyr="courtyard"><span class="d" style="background:#bc8cff"></span>Courtyard</button></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-4.100 -3.100 8.200 6.200' style='width:100%;height:100%'><line class='ly-silk' x1='-2.060' y1='-2.560' x2='2.060' y2='-2.560' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-2.060' y1='-2.465' x2='-2.060' y2='-2.560' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='-2.060' y1='2.560' x2='-2.060' y2='2.465' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='2.060' y1='-2.560' x2='2.060' y2='-2.465' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='2.060' y1='2.465' x2='2.060' y2='2.560' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-silk' x1='2.060' y1='2.560' x2='-2.060' y2='2.560' stroke='#d8b4fe' stroke-width='0.120'/><line class='ly-courtyard' x1='-3.700' y1='-2.460' x2='-2.200' y2='-2.460' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-3.700' y1='2.460' x2='-3.700' y2='-2.460' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-2.200' y1='-2.700' x2='2.200' y2='-2.700' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-2.200' y1='-2.460' x2='-2.200' y2='-2.700' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-2.200' y1='2.460' x2='-3.700' y2='2.460' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='-2.200' y1='2.700' x2='-2.200' y2='2.460' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='2.200' y1='-2.700' x2='2.200' y2='-2.460' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='2.200' y1='-2.460' x2='3.700' y2='-2.460' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='2.200' y1='2.460' x2='2.200' y2='2.700' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='2.200' y1='2.700' x2='-2.200' y2='2.700' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='3.700' y1='-2.460' x2='3.700' y2='2.460' stroke='#4ade80' stroke-width='0.050'/><line class='ly-courtyard' x1='3.700' y1='2.460' x2='2.200' y2='2.460' stroke='#4ade80' stroke-width='0.050'/><rect class='ly-copper pad' data-num='' data-name='' x='-1.030' y='-1.355' width='0.920' height='1.210' rx='0.230' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-0.570' y='-0.750' font-size='0.552' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'></text><rect class='ly-copper pad' data-num='' data-name='' x='-1.030' y='0.145' width='0.920' height='1.210' rx='0.230' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-0.570' y='0.750' font-size='0.552' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'></text><rect class='ly-copper pad' data-num='' data-name='' x='0.110' y='-1.355' width='0.920' height='1.210' rx='0.230' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='0.570' y='-0.750' font-size='0.552' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'></text><rect class='ly-copper pad' data-num='' data-name='' x='0.110' y='0.145' width='0.920' height='1.210' rx='0.230' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='0.570' y='0.750' font-size='0.552' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'></text><rect class='ly-copper pad' data-num='1' data-name='VIN' x='-3.450' y='-2.205' width='1.950' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-2.475' y='-1.905' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>1</text><rect class='ly-copper pad' data-num='2' data-name='TON' x='-3.450' y='-0.935' width='1.950' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-2.475' y='-0.635' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>2</text><rect class='ly-copper pad' data-num='3' data-name='EN' x='-3.450' y='0.335' width='1.950' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-2.475' y='0.635' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>3</text><rect class='ly-copper pad' data-num='4' data-name='CS' x='-3.450' y='1.605' width='1.950' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='-2.475' y='1.905' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>4</text><rect class='ly-copper pad' data-num='5' data-name='VCC' x='1.500' y='1.605' width='1.950' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='2.475' y='1.905' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>5</text><rect class='ly-copper pad' data-num='6' data-name='GND' x='1.500' y='0.335' width='1.950' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='2.475' y='0.635' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>6</text><rect class='ly-copper pad' data-num='7' data-name='BOOT' x='1.500' y='-0.935' width='1.950' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='2.475' y='-0.635' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>7</text><rect class='ly-copper pad' data-num='8' data-name='SW' x='1.500' y='-2.205' width='1.950' height='0.600' rx='0.150' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='2.475' y='-1.905' font-size='0.360' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>8</text><rect class='ly-copper pad' data-num='9' data-name='' x='-1.145' y='-1.500' width='2.290' height='3.000' rx='0.000' fill='#f59e0b' stroke='#00000033' stroke-width='0.03' opacity='0.94'/><text class='padnum' x='0.000' y='0.000' font-size='1.100' fill='#1c1206' text-anchor='middle' dominant-baseline='central' pointer-events='none' font-family='ui-monospace,monospace' font-weight='700'>9</text></svg></div>-<div id=tip></div>-<script>-var KIND="footprint", MPN="RAY/A6211GLJTR-T", PINS=[{"desc":"","name":"VIN","number":"1","type":""},{"desc":"","name":"TON","number":"2","type":""},{"desc":"","name":"EN","number":"3","type":""},{"desc":"","name":"CS","number":"4","type":""},{"desc":"","name":"SW","number":"8","type":""},{"desc":"","name":"BOOT","number":"7","type":""},{"desc":"","name":"GND","number":"6","type":""},{"desc":"","name":"VCC","number":"5","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>a6211gljtr-t</title>\ No newline at end of file
viewers/symbol.html+1−65
@@ -1,65 +1 @@-<!doctype html><html lang=en><head><meta charset=utf-8>-<meta name=viewport content="width=device-width,initial-scale=1"><title>RAY/A6211GLJTR-T symbol</title>-<style>-:root{--bg:#0d1117;--panel:#161b22;--edge:#30363d;--ink:#e6edf3;--mut:#8b949e;--acc:#00b8b0;--accb:#00e6dc;--hi:#6ea8fe}-*{box-sizing:border-box;margin:0}html,body{height:100%}-body{background:var(--bg);color:var(--ink);font-family:'Satoshi',system-ui,sans-serif;display:flex;flex-direction:column}-.bar{display:flex;flex-wrap:wrap;align-items:center;gap:8px;padding:8px 11px;border-bottom:1px solid var(--edge);flex:none}-.bar .h{font-size:11px;text-transform:uppercase;letter-spacing:.06em;color:var(--mut);font-weight:700}-.bar .sp{flex:1}-.lyrtog{display:inline-flex;align-items:center;gap:6px;font-size:11px;color:var(--mut);background:#1a2130;border:1px solid var(--edge);border-radius:999px;padding:3px 9px;cursor:pointer;user-select:none}-.lyrtog.on{color:var(--ink);border-color:#485162}.lyrtog:not(.on){opacity:.5}-.lyrtog .d{width:8px;height:8px;border-radius:50%;background:#485162}-.stage{flex:1;min-height:0;position:relative;overflow:hidden;background:var(--bg);cursor:grab;touch-action:none}-.stage.drag{cursor:grabbing}-.stage svg{position:absolute;inset:0;width:100%;height:100%}-.pingroup,.pad{cursor:pointer}-.pingroup.hi .pinvis{stroke:var(--hi)!important;stroke-width:7}-rect.pad.hi{stroke:var(--hi);stroke-width:.15;paint-order:stroke}-.lyr-off{display:none}-#tip{position:fixed;z-index:99;pointer-events:none;display:none;max-width:250px;background:#0d1117;border:1px solid var(--acc);border-radius:8px;padding:7px 10px;box-shadow:0 8px 26px #000a}-#tip .tn{font:700 12px ui-monospace,monospace;color:var(--accb)}-#tip .tt{font-size:10px;text-transform:uppercase;letter-spacing:.04em;color:var(--mut);margin-top:1px}-#tip .td{font-size:11px;color:var(--ink);margin-top:5px;line-height:1.4}-</style></head><body>-<div class=bar><span class=h>Schematic symbol</span><span class=sp></span></div>-<div class=stage id=stage><svg xmlns='http://www.w3.org/2000/svg' viewBox='-750 -300 1500 600' style='width:100%;height:100%'><rect x='-500.0' y='-250.0' width='1000.0' height='500.0' fill='#e35d5d22' stroke='#e35d5d' stroke-width='4'/><g class='pingroup' data-num='1' data-name='VIN'><line class='pinvis' x1='-700.0' y1='-150.0' x2='-500.0' y2='-150.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-150.0' x2='-500.0' y2='-150.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-105.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>1</text><text x='-470.0' y='-150.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>VIN</text><g class='pingroup' data-num='2' data-name='TON'><line class='pinvis' x1='-700.0' y1='-50.0' x2='-500.0' y2='-50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='-50.0' x2='-500.0' y2='-50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='-5.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>2</text><text x='-470.0' y='-50.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>TON</text><g class='pingroup' data-num='3' data-name='EN'><line class='pinvis' x1='-700.0' y1='50.0' x2='-500.0' y2='50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='50.0' x2='-500.0' y2='50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='95.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>3</text><text x='-470.0' y='50.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>EN</text><g class='pingroup' data-num='4' data-name='CS'><line class='pinvis' x1='-700.0' y1='150.0' x2='-500.0' y2='150.0' stroke='#dfe4ec' stroke-width='4'/><line x1='-700.0' y1='150.0' x2='-500.0' y2='150.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='-600.0' y='195.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>4</text><text x='-470.0' y='150.0' font-size='60' fill='#e6e9ef' text-anchor='start' dominant-baseline='central'>CS</text><g class='pingroup' data-num='8' data-name='SW'><line class='pinvis' x1='700.0' y1='-150.0' x2='500.0' y2='-150.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-150.0' x2='500.0' y2='-150.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-195.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>8</text><text x='470.0' y='-150.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>SW</text><g class='pingroup' data-num='7' data-name='BOOT'><line class='pinvis' x1='700.0' y1='-50.0' x2='500.0' y2='-50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='-50.0' x2='500.0' y2='-50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='-95.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>7</text><text x='470.0' y='-50.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>BOOT</text><g class='pingroup' data-num='6' data-name='GND'><line class='pinvis' x1='700.0' y1='50.0' x2='500.0' y2='50.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='50.0' x2='500.0' y2='50.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='5.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>6</text><text x='470.0' y='50.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>GND</text><g class='pingroup' data-num='5' data-name='VCC'><line class='pinvis' x1='700.0' y1='150.0' x2='500.0' y2='150.0' stroke='#dfe4ec' stroke-width='4'/><line x1='700.0' y1='150.0' x2='500.0' y2='150.0' stroke='transparent' stroke-width='26' pointer-events='stroke'/></g><text x='600.0' y='105.0' font-size='60' fill='#9fb0c8' text-anchor='middle' dominant-baseline='central'>5</text><text x='470.0' y='150.0' font-size='60' fill='#e6e9ef' text-anchor='end' dominant-baseline='central'>VCC</text></svg></div>-<div id=tip></div>-<script>-var KIND="symbol", MPN="RAY/A6211GLJTR-T", PINS=[{"desc":"","name":"VIN","number":"1","type":""},{"desc":"","name":"TON","number":"2","type":""},{"desc":"","name":"EN","number":"3","type":""},{"desc":"","name":"CS","number":"4","type":""},{"desc":"","name":"SW","number":"8","type":""},{"desc":"","name":"BOOT","number":"7","type":""},{"desc":"","name":"GND","number":"6","type":""},{"desc":"","name":"VCC","number":"5","type":""}];-var byNum={}; PINS.forEach(function(p){byNum[String(p.number)]=p;});-var stage=document.getElementById('stage'), svg=stage.querySelector('svg'), tip=document.getElementById('tip');-// ---- pan/zoom -----var vb=(svg.getAttribute('viewBox')||'0 0 100 100').split(/\s+/).map(Number), base=vb.slice();-function setVB(){svg.setAttribute('viewBox',vb.join(' '));}-stage.addEventListener('wheel',function(e){e.preventDefault();var r=stage.getBoundingClientRect();var mx=(e.clientX-r.left)/r.width,my=(e.clientY-r.top)/r.height;var f=e.deltaY<0?0.88:1.14;var nw=vb[2]*f,nh=vb[3]*f;vb[0]+=(vb[2]-nw)*mx;vb[1]+=(vb[3]-nh)*my;vb[2]=nw;vb[3]=nh;setVB();},{passive:false});-var pan=null;-stage.addEventListener('pointerdown',function(e){pan={x:e.clientX,y:e.clientY};stage.classList.add('drag');stage.setPointerCapture(e.pointerId);});-stage.addEventListener('pointermove',function(e){if(!pan)return;var r=stage.getBoundingClientRect();vb[0]-=(e.clientX-pan.x)/r.width*vb[2];vb[1]-=(e.clientY-pan.y)/r.height*vb[3];pan={x:e.clientX,y:e.clientY};setVB();});-function endPan(){pan=null;stage.classList.remove('drag');}-stage.addEventListener('pointerup',endPan);stage.addEventListener('pointerleave',endPan);-stage.addEventListener('dblclick',function(){vb=base.slice();setVB();});-// ---- cross-highlight bus -----function els(n){return [].slice.call(document.querySelectorAll('[data-num="'+n+'"]'));}-function clearHi(){[].slice.call(document.querySelectorAll('.hi')).forEach(function(e){e.classList.remove('hi');});}-function hi(n){els(n).forEach(function(e){e.classList.add('hi');});}-function post(n){try{parent.postMessage({type:'lbr-hover',pin:n===null?null:String(n),mpn:MPN},'*');}catch(_){}}-function showTip(n,x,y){var p=byNum[String(n)];if(!p)return;tip.innerHTML='<span class=tn></span><div class=tt></div><div class=td></div>';tip.querySelector('.tn').textContent=n+'  '+(p.name||'');tip.querySelector('.tt').textContent=p.type||'';var d=p.desc||'';if(d)tip.querySelector('.td').textContent=d;else tip.querySelector('.td').style.display='none';tip.style.display='block';tip.style.left=(x+14)+'px';tip.style.top=(y+12)+'px';}-[].slice.call(document.querySelectorAll('.pingroup,.pad')).forEach(function(g){-  var n=g.getAttribute('data-num');-  g.addEventListener('mouseenter',function(e){clearHi();hi(n);post(n);showTip(n,e.clientX,e.clientY);});-  g.addEventListener('mousemove',function(e){tip.style.left=(e.clientX+14)+'px';tip.style.top=(e.clientY+12)+'px';});-  g.addEventListener('mouseleave',function(){clearHi();post(null);tip.style.display='none';});-});-window.addEventListener('message',function(e){var d=e.data||{};if(d.type!=='lbr-hover')return;clearHi();if(d.pin!=null)hi(d.pin);});-// ---- footprint layer toggles -----[].slice.call(document.querySelectorAll('.lyrtog')).forEach(function(b){-  function apply(on){[].slice.call(document.querySelectorAll('.ly-'+b.getAttribute('data-lyr'))).forEach(function(el){el.classList.toggle('lyr-off',!on);});}-  apply(b.classList.contains('on'));-  b.addEventListener('click',function(){apply(b.classList.toggle('on'));});-});-// ---- auto-grow the host readme iframe -----function ph(){var h=Math.max(360,Math.min(16000,document.body.scrollHeight||420));parent.postMessage({type:'readme-height',height:h},'*');}-window.addEventListener('load',ph);setTimeout(ph,300);-</script>-</body></html>+<!doctype html><title>a6211gljtr-t</title>\ No newline at end of file