component
A6211GLJTR-T
Public Made by Adomby adom
Allegro MicroSystems LLC LED Drivers, SOIC-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.1
4 files changed
+415−15
a6211gljtr-t-hero.glbadded⋯ 1 unchanged line ⋯
a6211gljtr-t-hero.overlay.jsonadded+273@@ -0,0 +1,273 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "A6211GLJTR-T",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 9,+ "span_mm": 7.24,+ "dash_mm": 0.181,+ "gap_mm": 0.1086,+ "pad_stroke_mm": 0.0434+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 8,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.552,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.0,+ 3.0,+ -2.348,+ 2.348+ ],+ "pads_bbox_mm": [+ -3.45,+ 3.45,+ -2.205,+ 2.205+ ],+ "seating_z_mm": -0.0+ },+ "sources": {+ "glb": "a6211gljtr-t-etched.glb",+ "glb_sha256": "80d71a8cf457667ff06e2dbde97f40ca7827d60d3c99ec3d366c76f4984fb29d",+ "footprint": "a6211gljtr-t.kicad_mod",+ "footprint_sha256": "a7971720bdda0353306df93e5fd71765420f318659baa75f0dc1e7a40c1d2eca",+ "pins": "page.json component.pins",+ "pins_sha256": "c5304b0eb06d77f3ced1d4cfbe9cea225e242b0bb3ef5286a8cb0f8e51fc34fb"+ },+ "generator": "adom-wiki 1.8.23 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "VIN",+ "x": -3.6,+ "y": -1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "TON",+ "x": -3.6,+ "y": -0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "EN",+ "x": -3.6,+ "y": 0.635,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "CS",+ "x": -3.6,+ "y": 1.905,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "VCC",+ "x": 3.6,+ "y": 1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "6",+ "text": "GND",+ "x": 3.6,+ "y": 0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "7",+ "text": "BOOT",+ "x": 3.6,+ "y": -0.635,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "8",+ "text": "SW",+ "x": 3.6,+ "y": -1.905,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ -0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -2.475,+ 1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ 0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -0.635+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ 2.475,+ -1.905+ ],+ "size_mm": [+ 1.95,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "rect",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 2.29,+ 3.0+ ],+ "rot": 0.0+ }+ ]+}
package.json+129−4@@ -1,6 +1,6 @@ { "slug": "a6211gljtr-t",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Allegro MicroSystems LLC LED Drivers, SOIC-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,131 @@ "docs/hero.png", "docs/a6211gljtr-t-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "a6211gljtr-t-etched.step",+ "a6211gljtr-t-etched.glb",+ "a6211gljtr-t-hero.glb",+ "a6211gljtr-t-hero.overlay.json"+ ],+ "component": {+ "mpn": "A6211GLJTR-T",+ "manufacturer": "Allegro MicroSystems LLC",+ "package": "SOIC-8-EP",+ "pin_count": 9,+ "category": "LED Drivers",+ "parts": {+ "symbol": "a6211gljtr-t.kicad_sym",+ "footprint": "a6211gljtr-t.kicad_mod",+ "model_3d": "a6211gljtr-t-hero.glb",+ "model_3d_plain": "a6211gljtr-t.glb",+ "model_3d_step": "a6211gljtr-t-etched.step",+ "model_3d_step_plain": "a6211gljtr-t.step",+ "lbr": "a6211gljtr-t.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "VIN",+ "type": "power_in",+ "description": "Supply voltage input terminal. Operating range 6 to 48 V (absolute max −0.3 to 50 V). Bypass locally to GND."+ },+ {+ "number": "2",+ "name": "TON",+ "type": "input",+ "description": "Regulator on-time setting resistor terminal. External resistor RON to VIN sets the buck switch on-time (and effective switching frequency)."+ },+ {+ "number": "3",+ "name": "EN",+ "type": "input",+ "description": "Logic input for Enable and PWM dimming. VIL = 0.4 V, VIH = 1.8 V (abs max −0.3 to VIN+0.3 V). Drive with 100 Hz to 2 kHz PWM for LED brightness control; low = low-power shutdown (~1 µA)."+ },+ {+ "number": "4",+ "name": "CS",+ "type": "input",+ "description": "Drive output current sense feedback. Connects to RSENSE between the LED cathode and GND; internal 0.2 V reference sets the average LED current (ILED = 0.2 V / RSENSE). Absolute max −0.3 to 7 V."+ },+ {+ "number": "5",+ "name": "VCC",+ "type": "power_out",+ "description": "Internal linear regulator output (~5.3 V typ). Decouple with CVCC to GND. Absolute max VCC-to-GND −0.3 to 7 V; intended for internal use, not for external loading."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground terminal. Tie to the exposed thermal PAD and to the power ground plane."+ },+ {+ "number": "7",+ "name": "BOOT",+ "type": "passive",+ "description": "DMOS gate-driver bootstrap terminal. External CBOOT capacitor between BOOT and SW provides the high-side gate drive supply. Absolute max −0.3 to VIN+8 V; UVLO ~2.9 V (BOOT-to-SW)."+ },+ {+ "number": "8",+ "name": "SW",+ "type": "output",+ "description": "Switched output terminal (source of the integrated high-side N-channel DMOS). Connects to the buck inductor L1 and to the freewheeling diode D1 cathode. Absolute max −1.5 to VIN+0.3 V; RDS(on) ≈ 0.25 Ω, 3 A max output."+ },+ {+ "number": "PAD",+ "name": "PAD",+ "type": "power_in",+ "description": "Exposed pad on the underside of the package for enhanced thermal dissipation. Must be connected to GND (pin 6) and to a copper thermal pour. RθJP ≈ 2 °C/W.",+ "thermal_pad": true+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "a6211gljtr-t.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.55+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "2d6f7e774e8143e3320cbd59eb5be9f3b7864614644e3b072006e1eb05fb7fa6",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "a6211gljtr-t-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6.0,+ 4.9,+ 1.55+ ],+ "zmin_mm": -0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "74c4a288fcc850f1b54ba32d2fa5b87639259f0ec7144ea590294db53cc6ba71",+ "checked": "2026-11-12",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public"+}
page.json+13−11@@ -1,6 +1,6 @@ { "slug": "a6211gljtr-t",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Allegro MicroSystems LLC LED Drivers, SOIC-8-EP. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -25,11 +25,12 @@ "docs/a6211gljtr-t-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "a6211gljtr-t-etched.step"+ "a6211gljtr-t-etched.step",+ "a6211gljtr-t-etched.glb",+ "a6211gljtr-t-hero.glb",+ "a6211gljtr-t-hero.overlay.json" ],- "visibility": {- "public": true- },+ "visibility": "public", "author": { "name": "Ray" },@@ -42,7 +43,7 @@ "parts": { "symbol": "a6211gljtr-t.kicad_sym", "footprint": "a6211gljtr-t.kicad_mod",- "model_3d": "a6211gljtr-t-etched.glb",+ "model_3d": "a6211gljtr-t-hero.glb", "model_3d_plain": "a6211gljtr-t.glb", "model_3d_step": "a6211gljtr-t-etched.step", "model_3d_step_plain": "a6211gljtr-t.step",@@ -140,17 +141,18 @@ "origin": "footprint origin = pad-pattern centre", "seat": "z = 0", "extents_mm": [- 6.0,+ 6, 4.9, 1.55 ],- "zmin_mm": -0.0,- "centre_offset_mm": 0.0,+ "zmin_mm": 0,+ "centre_offset_mm": 0, "footprint_binding": "identity", "sha256": "74c4a288fcc850f1b54ba32d2fa5b87639259f0ec7144ea590294db53cc6ba71", "checked": "2026-11-12", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]- }-}+ },+ "org": "adom"+}